1. はじめに
The TC Electronic HALL OF FAME 2 REVERB is an iconic reverb pedal designed for guitarists seeking versatile and high-quality reverb effects. This manual provides essential information for setting up, operating, and maintaining your pedal.
2. 主な特徴
- Innovative MASH Technology: The footswitch transforms into a pressure-sensitive expression controller, allowing for dynamic real-time effect manipulation.
- Shimmer Reverb Algorithm: Elevates your reverb an octave through each feedback loop, delivering an ethereal and atmospheric sound.
- Next-Generation Reverb Algorithms: Provides realistic and phenomenal-sounding reverb tones.
- トーンプリント対応: Create and customize unique tones for your pedal using the free TonePrint app, offering endless sonic possibilities.
3. コントロールと接続
図1: トップダウン view of the HALL OF FAME 2 REVERB pedal, showing controls and footswitch.
This image displays the top surface of the TC Electronic HALL OF FAME 2 REVERB pedal. Visible are four black rotary knobs and a single silver MASH footswitch. The knobs are labeled 'DECAY', 'TONE', 'LEVEL', and a multi-position 'TYPE' knob. The 'TYPE' knob allows selection between various reverb algorithms such as 'SPRING', 'PLATE', 'HALL', 'ROOM', 'CHURCH', 'MOD', 'LOFI', 'SHIMMER', and 'CLOUD'. The MASH footswitch is prominently located at the bottom center, featuring 'MASH' and 'TRUE BYPASS' labels.
図2：側面 view of the pedal, highlighting input and output jacks.
この画像は側面を示しています view of the HALL OF FAME 2 REVERB pedal, revealing the input and output jacks. There are two input jacks labeled 'STEREO IN MONO' (1 and 2) and two output jacks labeled 'STEREO OUT MONO' (REVERB and 2). These 1/4-inch audio jacks allow for both mono and stereo connections, providing flexibility in signal routing.
図3：背面 view of the pedal, showing power input and USB port.
The rear panel of the pedal is shown, featuring the power input and a USB port. The power input is a standard 9V DC 100mA jack. The USB port is used for connecting the pedal to a computer for TonePrint editing and firmware updates.
3.1. コントロールノブ
- 減衰： Controls the length of the reverb tail. Turn clockwise for longer decay, counter-clockwise for shorter.
- トーン： Adjusts the brightness or darkness of the reverb. Clockwise for brighter, counter-clockwise for darker.
- レベル： Sets the overall mix level of the reverb effect with your dry signal.
- タイプ： A multi-position switch to select different reverb algorithms (Spring, Plate, Hall, Room, Church, Mod, Lofi, Shimmer, Cloud).
3.2. MASHフットスイッチ
The MASH footswitch is a pressure-sensitive expression controller. Pressing harder on the footswitch dynamically alters a chosen effect parameter, offering expressive control beyond simple on/off switching. It also functions as a true bypass switch for activating/deactivating the effect.
3.3. 接続
- INPUT (1/4" Mono/Stereo): Connect your instrument or previous pedal in the signal chain here. Supports mono or stereo input.
- OUTPUT (1/4" Mono/Stereo): 接続する amplifier or next pedal in the signal chain. Supports mono or stereo output.
- POWER (9V DC, 100mA): Connect a regulated 9V DC power supply (center negative).
- USBポート: For connecting to a computer to use the TonePrint Editor software and for firmware updates.
4.セットアップガイド
- すべてのオーディオ機器（amplifier, other pedals) is powered off.
- Connect your guitar to the INPUT jack(s) of the HALL OF FAME 2 REVERB pedal.
- Connect the OUTPUT jack(s) of the pedal to your ampライファイアーまたはシグナルチェーン内の次のペダルとして使用します。
- Connect a regulated 9V DC power supply (center negative, 100mA minimum) to the POWER input.
- 電源を入れます ampライターやその他のオーディオ機器。
5. 操作手順
5.1. 基本操作
- Engage/Bypass: Press the MASH footswitch once to toggle the effect on or off. The LED indicator will illuminate when the effect is active.
- リバーブタイプの選択: Turn the TYPE knob to select your desired reverb algorithm.
- Adjusting Reverb Parameters: Use the DECAY, TONE, and LEVEL knobs to fine-tune the selected reverb type to your preference.
5.2. MASH Footswitch Functionality
The MASH footswitch is a pressure-sensitive expression controller. Pressing harder on the footswitch dynamically alters a chosen effect parameter, offering expressive control beyond simple on/off switching. The specific parameter controlled by MASH can be customized using the TonePrint Editor.
5.3. TonePrint Functionality
The HALL OF FAME 2 REVERB is TonePrint enabled. This allows you to beam custom-tuned effects from your smartphone (via the free TonePrint app) directly to your pedal, or create your own unique reverb sounds using the TonePrint Editor software on your computer (via USB). Visit the TC Electronic website for more information and to download the app/software.
6. 技術仕様
| 特徴 | 仕様 |
|---|---|
| 寸法（長さ×幅×高さ） | 12.2 x 7.4 x 5 cm |
| 重さ | 340グラム |
| 電源入力 | 9V DC、100mA（センターマイナス） |
| 巻tage | 240 Volts (Adapter dependent) |
| オーディオ効果 | リバーブ |
| コントロールタイプ | Push button (MASH footswitch) |
| ハードウェアインターフェイス | 1/4 inch Audio Jack |
| 信号フォーマット | アナログ |
| モデル番号 | 000-CI300-00010 |
免責事項：仕様は予告なく変更される場合があります。
7。 トラブルシューティング
- 音が出ない: すべてのケーブル接続を確認してください（ギター、ペダル、 amplifier). Ensure the power supply is correctly connected and functioning. Verify the pedal is engaged (LED on).
- 音が弱い、または歪んでいる: Check instrument cables for damage. Ensure proper input levels from your guitar and output levels to your amplifier. Adjust the LEVEL knob on the pedal.
- 効果は変化しない: Ensure the TYPE knob is set correctly. If using TonePrint, verify the TonePrint has been successfully beamed to the pedal.
- MASH Footswitch Not Responding: Ensure the pedal is powered and engaged. If customized via TonePrint, verify the MASH function is correctly assigned.
8. 保証とサポート
Product warranty information is not available in the provided data. For detailed warranty terms and conditions, please refer to the official TC Electronic website or contact your local dealer. For technical support, visit the TC Electronic support page or consult the comprehensive online resources.