Sennheiser XSW 1-825 DUAL

Sennheiser XSW 1-825 DUAL ワイヤレスマイクシステム 取扱説明書

ブランド: ゼンハイザー

Model: XSW 1-825 DUAL (Model Number: 508263)

1.製品オーバーview

The Sennheiser XSW 1-825 DUAL-A Channel Wireless Microphone System is designed for ease of use and reliable audio performance. This dual vocal set includes one EM-XSW 1 DUAL receiver and two SKM 825-XSW dynamic, cardioid microphones. Operating within the A frequency range (548 - 572MHz), the system offers convenient features such as one-button scanning and synchronization for straightforward setup. The streamlined receiver features internal diversity antennas, contributing to a clean aesthetic and stable signal reception. Up to 10 systems can be used simultaneously, making it suitable for various applications.

  • Easy-to-use handheld wireless system with great sound.
  • 1-button scanning and synchronization for easy setup.
  • Intuitive icon-based indicators for simple operation.
  • Internal diversity receiver antennas for a simplified look.
  • Supports use of up to 10 systems simultaneously.
Sennheiser XSW 1-825 DUAL Wireless Microphone System components

Figure 1: Sennheiser XSW 1-825 DUAL Wireless Microphone System showing the receiver and two handheld microphones.

2. 箱の中身

Your Sennheiser XSW 1-825 DUAL system package should contain the following items:

  • 1x EM-XSW 1 DUAL receiver
  • 2x SKM 825-XSW handheld microphones (dynamic, cardioid)
  • 2x MZQ 1 microphone clips
  • 1x NT 12-5 CW power supply
  • 2x AA batteries (included for immediate use)

3. セットアップ

3.1 Receiver Setup (EM-XSW 1 DUAL)

  1. 電源接続: Connect the NT 12-5 CW power supply to the DC 12V input on the rear of the EM-XSW 1 DUAL receiver. Plug the power supply into a suitable electrical outlet.
  2. オーディオ出力: Connect the receiver's audio output to your mixer or amplifier. The receiver offers both balanced XLR outputs and an unbalanced 1/4 inch (6.3mm) jack. Ensure the correct cable type is used for your audio system.
  3. アンテナ： The receiver features internal diversity antennas. No external antenna setup is required.
  4. 電源オン: Press the power button on the front panel of the receiver to turn it on. The display will illuminate.

3.2 Microphone Setup (SKM 825-XSW)

  1. バッテリーの取り付け: Unscrew the bottom part of the microphone handle to reveal the battery compartment. Insert two AA batteries, ensuring correct polarity. The system includes 2 AA batteries.
  2. 電源オン: Press and hold the power button on the microphone handle until the indicator light illuminates.
  3. 同期: With both the receiver and microphone powered on, use the 'SET/SCAN' button on the receiver to initiate a frequency scan. Once a clear channel is found, use the 'SYNC' button on the receiver and align the microphone's IR window with the receiver's IR sensor to synchronize the frequency. The microphone display will confirm successful synchronization.
Two Sennheiser SKM 825-XSW handheld microphones

Figure 2: Two SKM 825-XSW handheld microphones, showing their design and battery compartment access.

Sennheiser EM-XSW 1 DUAL receiver front and back panels

Figure 3: The EM-XSW 1 DUAL receiver, illustrating its front panel controls and rear panel connections for audio output and power.

4. 操作手順

4.1 マイクの操作

  • 電源オン/オフ: Press and hold the power button on the microphone to turn it on or off. A green light indicates the microphone is active.
  • ミュート機能： The microphone features a mute function. Refer to the microphone's display or indicator for its current mute status.
  • バッテリーの状態: The microphone's display provides an indication of the remaining battery life.

4.2 受信機の操作

  • チャンネル選択: Use the 'CH+' and 'CH-' buttons on the receiver to manually select a channel, or use the 'SET/SCAN' function to automatically find a clear frequency.
  • 音量コントロール: Adjust the output volume of each channel using the 'VOL+' and 'VOL-' buttons on the receiver.
  • バッテリー寿命インジケーター: The receiver's display shows the battery life of the connected microphones.

5. 仕様

特徴仕様
オーディオ感度75デシベル
アイテム重量（マイク）245グラム（8.6オンス）
マイクフォームファクターハンドヘルド
製品寸法16.9 x 13.6 x 3.3インチ
電源電池式（単三電池2本必要、付属）
材料ABS（アクリロニトリルブタジエンスチレン）
信号対ノイズ比103デシベル
チャンネル数2
周波数応答572 MHz (A band: 548 - 572MHz)
メーカーゼンハイザー
接続技術XLR
コネクタタイプXLR
特集ミュート機能、音声起動録音
対応デバイスAmpライター、カラオケマシン、ラジオ、スピーカー
色黒
極性パターン一方向

6. メンテナンス

  • クリーニング： Use a soft, dry cloth to clean the exterior of the receiver and microphones. Avoid using liquid cleaners or solvents.
  • バッテリーのケア： If using rechargeable AA batteries, ensure they are charged regularly and replaced when their performance degrades. Remove batteries if the system will not be used for an extended period to prevent leakage.
  • ストレージ： システムは直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。

7。 トラブルシューティング

  • 音が出ない:
    • 受信機とマイクの両方の電源がオンになっていることを確認します。
    • マイクの電池を確認し、少ない場合は交換してください。
    • マイクがミュートされていないことを確認してください。
    • Confirm the receiver is correctly connected to your audio system and input levels are appropriate.
    • Resynchronize the microphone and receiver.
  • 干渉/音質が悪い:
    • 受信機で周波数スキャンを実行し、クリアなチャネルを見つけます。
    • Ensure the microphone and receiver are within operating range and have a clear line of sight.
    • 受信機を他の無線デバイスや電磁干渉源の近くに置かないでください。
  • Microphone Not Synchronizing:
    • Ensure both devices are powered on and in close proximity during the sync process.
    • Check for any obstructions between the IR sensors.

8. 保証とサポート

For warranty information and technical support, please refer to the official Sennheiser web購入サイトをご覧いただくか、カスタマーサービスまでお問い合わせください。保証請求の際に必要となりますので、購入証明書を保管してください。