導入
The Andoer L200 Telephoto Lens Support is designed to provide stable support for long and heavy camera lenses, reducing strain on the camera body and lens mount. Constructed from durable aluminum alloy, it features adjustable height and horizontal movement to accommodate various lens sizes and camera setups. It is compatible with Arca-Swiss type mounts and offers 1/4" and 3/8" threads for direct tripod mounting.
製品の特徴
- Telephoto Lens Support: Specifically designed for large lenses, with a wheel center diameter of 48mm (1.9 inches).
- 耐久性のある構造: Made from CNC aluminum alloy with an oxidized surface treatment for enhanced durability.
- 高耐荷重: Capable of supporting heavy loads ranging from 6 kg to 10 kg (13.2 lbs to 22 lbs).
- 調整可能なデザイン: Features adjustable height and horizontal movement to fit different lens configurations.
- クイックリリースプレート: Equipped with a 1/4" screw quick release plate featuring non-slip rubber for secure attachment.
- 多彩な取り付け: Includes both 1/4" and 3/8" threads on the bottom for direct mounting onto tripods or photography heads.
- Arca-Swiss互換性: The dual-sided neck is compatible with Arca-Swiss type mounts.
パッケージ内容
パッケージには以下のアイテムが含まれています:
- 1 x Andoer L200 Telephoto Lens Support
- 2 x Wrenches (for adjustments)
Note: Only the lens support and wrenches are included. Camera, lens, and tripod are for illustration purposes only and are not included.
セットアップ手順
三脚への取り付け
The Andoer L200 lens support can be mounted directly onto a tripod or a photography head. Locate the 1/4" or 3/8" threaded holes on the bottom of the lens support base plate.
画像の説明: クローズアップ view of the base plate of the Andoer L200 lens support, highlighting the 1/4" and 3/8" threaded holes for tripod attachment. This allows for direct mounting to various tripod systems.
Securely fasten the lens support to your tripod's quick release plate or directly to the tripod head using the appropriate screw size.
Mounting Camera and Lens
Attach your camera's quick release plate (if not already attached) to the camera body. Then, mount your camera and lens assembly onto the quick release clamp of the Andoer L200 lens support. Ensure the lens is positioned over the support wheels.
Image Description: The Andoer L200 telephoto lens support is shown mounted on a tripod, with a DSLR camera and a large telephoto lens attached. The lens rests on the support wheels, demonstrating proper setup for stability.
操作手順
高さの調整
To adjust the vertical height of the lens support, loosen the locking knob on the vertical arm. Slide the arm up or down until the support wheels are aligned with the bottom of your telephoto lens. Tighten the locking knob securely to fix the height.
Image Description: A diagram illustrating the adjustable features of the Andoer L200 lens support. Arrows indicate vertical movement for height adjustment and horizontal movement for positioning the quick release plate.
Adjusting Horizontal Position
To adjust the horizontal position of the quick release plate, loosen the corresponding locking knob. Slide the plate along the base rail to achieve optimal balance for your camera and lens setup. Once balanced, tighten the locking knob firmly.
Refer to the image above for visual guidance on horizontal adjustment.
Using the Arca-Swiss Compatible Neck
The dual-sided neck of the lens support is compatible with Arca-Swiss type clamps. This allows for integration into existing Arca-Swiss systems for quick attachment and detachment.
画像の説明: 詳細な view of the dual-sided neck of the Andoer L200 lens support, showing its design for Arca-Swiss compatibility and an anti-drop security screw for added safety.
メンテナンス
- クリーニング： Wipe the aluminum alloy body with a soft, dry cloth to remove dust and dirt. For stubborn marks, use a slightly damp 布で拭き、完全に乾かしてください。研磨剤入りの洗剤や溶剤の使用は避けてください。
- 潤滑: Periodically check the moving parts and locking mechanisms. If any movement feels stiff, apply a small amount of silicone-based lubricant to the sliding surfaces and threads.
- ストレージ： Store the lens support in a dry, clean environment away from extreme temperatures and humidity.
- 検査： Regularly inspect all screws and connections to ensure they are tight. Re-tighten any loose components using the provided wrenches.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| Lens support feels unstable. | Loose connections; improper balance. | Ensure all locking knobs (height, horizontal, tripod mount) are securely tightened. Adjust the horizontal position to balance the camera and lens assembly. |
| Difficulty adjusting height or horizontal position. | Locking knobs are too tight; dirt/debris on sliding surfaces. | Loosen locking knobs sufficiently before attempting adjustment. Clean sliding surfaces and apply a small amount of lubricant if necessary. |
| Lens not resting properly on support wheels. | 高さ調整が正しくありません。 | Adjust the vertical height of the support arm until the lens rests evenly and securely on the wheels. |
仕様
| ブランド | アンドーア |
| モデル | L200 |
| 材料 | アルミニウム合金 |
| 色 | 黒 |
| 最大積載量 | 6～10 kg（13.2～22ポンド） |
| ネックサイズ | 200 x 38 x 12 mm (7.9 x 1.5 x 0.5 インチ) |
| Screw Type (Quick Release Plate) | 1/4インチ |
| Bottom Thread Type (Tripod Mount) | 1/4インチと3/8インチ |
| Plate Holder Size | 50 x 48 mm（2 x 1.9インチ） |
| クイックリリースプレートのサイズ | 50 x 38 x 10 mm (2 x 1.5 x 0.4 インチ) |
| ベースプレートサイズ | 100 x 38 x 10 mm (3.9 x 1.5 x 0.4 インチ) |
| Wheel Center Distance | 48ミリメートル（1.9インチ） |
| ホイール直径 | 27ミリメートル（1.1インチ） |
| アイテム重量 | 543 g (19.1 オンス) |
| 折りたたみサイズ | 22.7 x 11.5 x 6.4 cm（8.9 x 4.5 x 2.5インチ） |
| 耐水性レベル | 耐水性はありません |
保証とサポート
Specific warranty information for the Andoer L200 Telephoto Lens Support is not provided in this manual. Please refer to the product packaging or the official Andoer web詳細な保証条件については、サイトをご覧ください。
For technical support or customer service inquiries, please contact Andoer customer support through their official channels. Contact information can typically be found on the manufacturer's webサイトまたは付属のドキュメント。