1. はじめに
The Tccmebius TCC-S862-DE is a versatile docking station designed for easy access to 2.5-inch and 3.5-inch IDE and SATA I/II/III hard disk drives (HDDs) and solid-state drives (SSDs). It features a USB 2.0 interface for data transfer, an integrated multi-card reader, and a 2-port USB 2.0 hub. This manual provides detailed instructions for setup, operation, and maintenance of your docking station.
画像1.1：正面 view of the Tccmebius TCC-S862-DE Docking Station.
2. パッケージ内容
パッケージにすべてのアイテムが含まれていることを確認してください。
- Tccmebius TCC-S862-DE HDD Docking Station
- Power Adapter (Output: 12V 3A)
- Mini USB 2.0 Cable (100cm)
- ユーザーマニュアル（このドキュメント）
Image 2.1: Illustration of the docking station, power adapter, USB cable, and user manual included in the package.
3.製品オーバーview
3.1 フロントパネルの機能
画像3.1: 詳細 view of the front panel, highlighting card reader slots, USB hub, and LED indicators.
- CF/MD Card Slot: For CompactFlash and Microdrive memory cards.
- XD Card Slot: For xD-Picture Cards.
- TFカードスロット： For TransFlash (MicroSD) memory cards.
- MS Card Slot: For Memory Stick (Duo/Pro) memory cards.
- SDカードスロット: For Secure Digital memory cards.
- USB HOST (2x USB 2.0 Hub): Connect USB peripherals.
- LEDインジケーター: Red for power, Blue for card reader activity.
3.2つのトップパネルの機能
画像3.2: 上 view showing SATA and IDE drive bays, adjustable IDE connector, and One-Touch Backup button.
- SATAポート: For 2.5-inch/3.5-inch SATA I/II/III HDDs/SSDs.
- IDE Port: For 2.5-inch/3.5-inch IDE HDDs.
- Adjustable 3.5-inch IDE 4PIN Connector: Allows adjustment for proper connection with 3.5-inch IDE drives.
- One-Touch Backup (OTB) Button: Initiates the backup process (requires software installation).
3.3 背面パネルの機能
画像3.3：リア view displaying the power switch, power socket, e-SATA port, and USB interface.
- 電源スイッチ： ドッキング ステーションの電源をオンまたはオフにします。
- 電源ソケット： 付属の電源アダプターに接続します。
- e-SATA Interface: For direct e-SATA connection to a computer (alternative to USB).
- USB Interface (Mini USB 2.0 Type B): Connects the docking station to your computer via USB.
4. セットアップ手順
4.1 ドッキングステーションの接続
- 付属の電源アダプターを 電源ソケット on the back of the docking station and then to a power outlet.
- Connect the Mini USB 2.0 cable to the USBインターフェース on the back of the docking station and the other end to an available USB 2.0 port on your computer.
- 裏返す 電源スイッチ to the 'ON' position. The red power indicator LED on the front panel will illuminate.
4.2 Installing a Hard Drive
Ensure the docking station is powered off before inserting or removing any hard drives.
Image 4.1: Visual guide for vertically inserting and removing hard drives into the docking station.
- For SATA HDDs/SSDs (2.5-inch or 3.5-inch): Gently slide the SATA drive vertically into the SATAポート until it is firmly seated.
- For IDE HDDs (2.5-inch or 3.5-inch):
- For 3.5-inch IDE drives, adjust the Adjustable 3.5-inch IDE 4PIN Connector on the top panel to align with your drive's power pins.
- Gently slide the IDE drive vertically into the IDE Port, ensuring the pins align correctly.
- Once the drive is inserted, power on the docking station. Your operating system should detect the new hardware.
重要： Do not replace the hard drive while the product is operating.
Image 4.2: The docking station with both a 2.5-inch and 3.5-inch hard drive inserted, connected to a laptop.
5. 操作手順
5.1データ転送
After successful installation, the connected hard drive will appear as a removable storage device on your computer. You can drag and drop fileコピー、貼り付け、または任意の file management software to transfer data between your computer and the hard drive. The USB 2.0 interface supports data transfer rates up to 480 Mbps.
5.2 カードリーダーの使用
Insert a compatible memory card (CF/MD, XD, TF, MS, SD) into the corresponding slot on the front panel. The blue LED indicator will flash during data access. The card reader can only read one memory card at a time, with support for cards up to 64GB.
5.3 ワンタッチバックアップ（OTB）機能
The OTB function allows for easy data backup from your computer to the external hard drive. To use this feature:
- Download the OTB software package from the official Tccmebius service webサイト。
- ダウンロードしたファイルを解凍する file and install the OTB software on your computer.
- Ensure a hard drive is properly installed in the docking station and connected to your computer.
- Launch the OTB software and configure your backup settings.
- を押す One-Touch Backup Button on the top panel of the docking station to initiate the backup process.
注記： The OTB software is not compatible with macOS and iOS operating systems.
Image 5.1: Close-up of the One-Touch Backup button on the docking station.
5.4 USBハブの使用
The two USB HOST ports on the front panel function as a standard USB 2.0 hub. You can connect various USB peripherals such as keyboards, mice, or USB flash drives to these ports.
6. メンテナンス
- ドッキングステーションは清潔に保ち、ほこりを取り除いてください。清掃には柔らかく乾いた布を使用してください。
- デバイスを極端な温度、湿度、または直射日光にさらさないでください。
- Do not attempt to disassemble or repair the device yourself. Refer to the warranty section for service information.
- Always safely eject hard drives from your operating system before physically removing them from the docking station to prevent data loss.
7。 トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| Docking station not recognized by computer. | Loose cable connection, power off, driver issue. | Check all cable connections. Ensure the power switch is ON. Try a different USB port on your computer. Restart your computer. |
| ハードドライブが検出されません。 | Drive not properly seated, drive unformatted, drive fault. | Ensure the hard drive is firmly seated in its slot. Check Disk Management (Windows) or Disk Utility (macOS) to see if the drive is recognized but unformatted. Format the drive if necessary (this will erase all data). Test with a different hard drive. |
| カードリーダーが動作しません。 | Card not fully inserted, incompatible card, only one card readable at a time. | Ensure the memory card is fully inserted into the correct slot. Remove any other memory cards. Verify the card type is supported. |
| OTB function not working. | Software not installed, incorrect configuration, macOS/iOS system. | Ensure OTB software is correctly installed and configured. Note that OTB software is not supported on macOS/iOS. |
8. 仕様
| 特徴 | 詳細 |
|---|---|
| モデル番号 | TCC-S862 |
| ブランド | トゥッケビウス |
| インタフェース | USB 2.0 (Mini USB Type B), eSATA |
| ドライブの互換性 | 2.5"/3.5" SATA I/II/III HDD/SSD, 2.5"/3.5" IDE HDD |
| Max SATA Capacity | 20TB |
| Max IDE Capacity | 1TB |
| データ転送速度 | 最大480 Mbps（USB 2.0） |
| カードリーダースロット | CF/MD, XD, TF (MicroSD), MS, SD |
| Max Card Capacity | 64ギガバイト |
| USBハブ | 2 x USB 2.0 HOST ports |
| オペレーティングシステムの互換性 | Windows XP/7/8/8.1/10/11 (32/64 Bit), Vista, Mac OS 10.10 or later, Linux, Android, iOS |
| 寸法（長さ×幅×高さ） | 18 cm x 11 cm x 10 cm |
| 重さ | 246グラム |
| 材料 | プラスチック |
9. 保証とサポート
Tccmebius provides a limited one-year warranty for this product and lifetime technical support. Please refer to the following warranty policy:
- Within 30 Days of Purchase: For returns or refunds, contact Amazon customer service directly, provided the product packaging and appearance are undamaged.
- Within 6 Months of Purchase (Quality Issues): If the product experiences quality issues not caused by human damage, send photos or videos via email demonstrating the problem. After verification by our technicians, a new product will be sent to you free of charge. The problematic product does not need to be returned.
- After 6 Months of Purchase (Product Issues): You may send the product to our factory in China for repair (customer pays shipping). Repairs will be completed within 7 working days and the product will be returned to you.
For technical support or warranty claims, please contact Tccmebius customer service via email. Contact information can typically be found on the product packaging or the official Tccmebius webサイト。