セントリー BT825

SENTRY BT825 Evolution Rechargeable Headphones User Manual

モデル: BT825

1. はじめに

Thank you for choosing the SENTRY BT825 Evolution Rechargeable Headphones. These headphones are designed to provide a high-quality audio experience with the convenience of wireless Bluetooth connectivity and a built-in in-line microphone for hands-free communication. This manual will guide you through the setup, operation, and maintenance of your new headphones.

SENTRY BT825 Evolution Rechargeable Headphones in packaging

Image: SENTRY BT825 Evolution Rechargeable Headphones in their retail packaging, highlighting Bluetooth connectivity, folding design, and 8 hours playtime.

2. パッケージ内容

パッケージに以下の項目が含まれているか確認してください。

  • SENTRY BT825 Evolution Rechargeable Headphones
  • 保護ケース
  • USB充電ケーブル
  • 3.5mmオーディオケーブル
  • ユーザーマニュアル(このドキュメント)

3.製品オーバーview

Familiarize yourself with the various parts and controls of your SENTRY BT825 Evolution headphones:

SENTRY BT825 Evolution Rechargeable Headphones

画像: クローズアップ view of the SENTRY BT825 Evolution headphones, showing the earcups and headband. The in-line microphone is integrated into the cable (not visible in this specific image but part of the product description).

  • 電源ボタン: ヘッドフォンのオン/オフや Bluetooth のペアリングに使用します。
  • 音量アップ/次のトラックボタン: 短く押すと音量が上がり、長く押すと次のトラックに進みます。
  • 音量ダウン/前のトラックボタン: 短く押すと音量が下がり、長く押すと前のトラックに戻ります。
  • 多機能ボタン(MFB): 音楽の再生/一時停止、通話の応答/終了。
  • マイクロフォン: ハンズフリー通話用に統合されています。
  • 3.5mmオーディオジャック: 有線接続の場合。
  • USB充電ポート: 内蔵バッテリーを充電します。
  • LEDインジケーター: 電源、充電、Bluetooth のステータスを表示します。

4. ヘッドフォンを充電する

Before first use, fully charge your headphones. The BT825 Evolution headphones feature USB connectivity for convenient charging.

  1. Connect the small end of the USB charging cable to the USB charging port on your headphones.
  2. USB 充電ケーブルの大きい方の端を USB 電源 (コンピューターの USB ポート、USB 壁アダプターなど) に接続します。
  3. 充電中は LED インジケーターが点灯し、充電が完了すると色が変わるか消灯します。
  4. フル充電すると約8時間の再生が可能です。

5. Bluetoothとのペアリング

ヘッドフォンをデバイスにワイヤレスで接続するには:

  1. ヘッドホンがオフになっていることを確認します。
  2. LED インジケーターが高速で点滅し (通常は青と赤)、ペアリング モードになるまで、電源ボタンを押し続けます。
  3. デバイス(スマートフォン、タブレット、コンピューター)で Bluetooth を有効にし、利用可能なデバイスを検索します。
  4. Select "SENTRY BT825" from the list of found devices.
  5. ペアリングされると、通常、LED インジケーターはゆっくり点滅するか、青色に点灯します。
  6. 無線範囲は最大10メートル(33フィート)です。

注記: ペアリングに失敗した場合は、ヘッドフォンとデバイスの Bluetooth をオフにして、手順を繰り返します。

6. ヘッドフォンの使用

オーディオ再生

  • 再生/一時停止: マルチファンクションボタン (MFB) を 1 回押します。
  • ボリュームアップ: 音量アップボタンを短く押します。
  • ボリュームダウン: 音量ダウンボタンを短く押します。
  • 次のトラック: 音量アップボタンを長押しします。
  • 前のトラック: 音量ダウンボタンを長押しします。

通話処理

The in-line microphone allows for hands-free calls when connected via Bluetooth.

  • 通話の応答/終了: MFBを1回押します。
  • 通話を拒否: MFBを2秒間押し続けます。
  • 最後の番号にリダイヤル: MFBを2回押します。

7.有線接続

You can also use your SENTRY BT825 Evolution headphones with a wired connection using the included 3.5mm audio cable. This is useful when the battery is depleted or for devices without Bluetooth.

  1. Plug one end of the 3.5mm audio cable into the 3.5mm audio jack on your headphones.
  2. 3.5mm オーディオ ケーブルのもう一方の端をデバイスのオーディオ出力ジャックに差し込みます。
  3. The headphones will function as passive wired headphones. Note that the built-in controls and microphone may not function in wired mode, depending on your device.

8. メンテナンス

ヘッドフォンの寿命を延ばし、最適なパフォーマンスを確保するには:

  • ヘッドフォンは定期的に柔らかく乾いた布で拭いてください。
  • ヘッドフォンを極端な温度、湿度、直射日光にさらさないでください。
  • 研磨剤や溶剤は使用しないでください。
  • Store the headphones in the provided protective case when not in use.
  • ヘッドホンを落としたり、強い衝撃を与えたりしないでください。

9。 トラブルシューティング

ヘッドフォンで問題が発生した場合は、次の解決策を試してください。

  • 電源なし: ヘッドフォンが完全に充電されていることを確認してください。
  • Bluetooth経由でペアリングできない:
    • ヘッドフォンがペアリング モードになっていることを確認します (LED が高速点滅)。
    • デバイスで Bluetooth が有効になっていることを確認してください。
    • ヘッドホンをデバイスに近づけます(10 メートル以内)。
    • Turn off and restart both the headphones and your device.
    • デバイス上の以前の Bluetooth 接続をクリアします。
  • 音が出ない:
    • ヘッドフォンと接続されたデバイスの両方の音量レベルを確認します。
    • ヘッドフォンが正しくペアリングされていること、または 3.5 mm ケーブルがしっかりと接続されていることを確認します。
    • 別のソースまたはアプリケーションからオーディオを再生してみてください。
  • マイクが機能しない:
    • Ensure the headphones are connected via Bluetooth. The microphone may not work in wired mode.
    • 接続されているデバイスのマイク設定を確認してください。

10. 仕様

特徴仕様
モデル番号BT825
ドライバーユニット40mm
周波数応答20Hz~20kHz
インピーダンス32オーム
感度110 +/-2dB
接続技術ワイヤレス(Bluetooth)、有線(3.5mmジャック)
Bluetooth範囲10メートル
Cord Length (3.5mm)4ft / 1.2m
含まれるコンポーネント保護ケース
追加機能USB connectivity, In-line Microphone

11. 公式製品ビデオ

ビジュアルについてはこの公式ビデオをご覧くださいview of the SENTRY BT825 Evolution Rechargeable Headphones.

ビデオ: 公式製品ビデオショーasing the Sentry BT825 Evolution Rechargeable Headphones, demonstrating its features and design.

12. 保証とサポート

Your SENTRY BT825 Evolution Headphones come with a 60日間の保証 ご購入日から製造上の欠陥が保証対象となります。保証請求の際は、購入証明書を保管してください。

For technical support, troubleshooting assistance, or warranty inquiries, please contact SENTRY customer service through their official web製品を購入したサイトまたは小売店にお問い合わせください。

© 2023 SENTRY. 無断複写・転載を禁じます。

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.