Uline コンフォートグリップナイフ ユーザーマニュアル

導入

This manual provides essential instructions for the safe and effective use, maintenance, and troubleshooting of your Uline Comfort-Grip Knife. Please read this manual thoroughly before operating the knife and retain it for future reference.

安全情報

WARNING: Blades are extremely sharp. Handle with extreme care. Always retract the blade when not in use. Keep out of reach of children.

Always wear appropriate personal protective equipment, such as cut-resistant gloves and eye protection, when handling or replacing blades.

コンポーネント

The Uline Comfort-Grip Knife consists of the following main components:

• ハンドル： 人間工学に基づいて快適なグリップを実現したデザイン。
• Blade Retraction Button: Used to extend and retract the blade.
• ブレード： Replaceable carbon steel utility blade.
• Blade Release Mechanism: Allows for quick blade changes.

設定

Blade Installation (Initial Setup)

Your Uline Comfort-Grip Knife comes with one blade pre-installed or included separately. If the blade is not installed, follow these steps:

1. Locate the blade release mechanism, typically a button or lever near the front of the knife.
2. Press and hold the blade release mechanism.
3. Carefully insert a new utility blade into the blade slot until it clicks into place. Ensure the blade is oriented correctly with the sharp edge facing forward.
4. Release the blade release mechanism. Gently pull on the blade to ensure it is securely locked.

注記： Always ensure the blade is fully seated and locked before use to prevent accidental dislodgement.

操作手順

刃の伸縮

The Uline Comfort-Grip Knife features a retractable blade with three positions for versatility and safety.

1. To extend the blade, locate the textured thumb slide button on the top of the handle.
2. Push the thumb slide button forward until the blade extends to your desired cutting depth. The knife has three distinct blade positions.
3. To retract the blade, pull the thumb slide button backward until the blade is fully enclosed within the handle.

重要： Always retract the blade fully when the knife is not in active use or when storing it.

切断技術

最適なパフォーマンスと安全性を実現するには:

• 常に体から離れたところで切り取ってください。
• Use a cutting mat or a sacrificial surface underneath the material being cut.
• Apply firm, even pressure. Do not force the blade.
• For thicker materials, make multiple shallow passes rather than one deep cut.

メンテナンス

ブレードの交換

Dull blades are dangerous and can lead to accidents. Replace the blade as soon as it shows signs of dullness or damage.

1. 刃が完全に引っ込んでいることを確認してください。
2. Locate and press the blade release mechanism.
3. Carefully slide the old blade out. Dispose of used blades safely in a designated blade disposal container or wrapped securely to prevent injury.
4. Insert a new Uline replacement blade (available separately) into the slot until it locks into place.
5. Release the blade release mechanism and verify the new blade is secure.

清掃と保管

Keep your knife clean and dry to ensure longevity and proper function.

• Wipe the knife clean with a dry cloth after each use.
• Do not immerse the knife in water or cleaning solutions.
• ナイフは刃を完全に収納した状態で、湿気や極端な温度を避け、乾燥した場所に保管してください。

トラブルシューティング

仕様

• モデル： B004SIPL18
• ブランド： ユライン
• Handle Dimensions (L x H x D): 6 x 1.3 x 0.8インチ
• Blade Dimensions (L x H): 2.4 x 0.74インチ
• 刃の厚さ: 0.6ミリメートル
• ハンドル材質: Zinc / Rubber
• ブレード材質: 炭素鋼
• ハンドルタイプ: 手動格納式
• 商品の重量: 4.8オンス
• 発売日: 17年2011月XNUMX日

保証情報

ULINE products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty information provided at the time of purchase or visit the official ULINE website. Typically, products are covered against defects in materials and workmanship under normal use.

カスタマーサポート

If you have any questions, require assistance, or need to order replacement parts (such as blades), please contact ULINE customer support:

• Webサイト： www.uline.com
• 電話： Please refer to the ULINE web地域の連絡先番号のサイト。

When contacting support, please have your product model number (B004SIPL18) and purchase details ready.