OHLINS Rear Suspension S36PR1C1LB Instruction Manual

1. はじめに

This manual provides essential information for the proper installation, adjustment, maintenance, and troubleshooting of your OHLINS S36PR1C1LB Rear Suspension unit. To ensure optimal performance and safety, please read these instructions carefully before installation and use. This suspension is designed specifically for Harley-Davidson Dyna Glide Family motorcycles manufactured between 1991 and 2005.

2. 安全情報

• 専門家による取り付けを推奨: Installation of suspension components requires specialized tools and knowledge. It is highly recommended that this product be installed by a qualified motorcycle technician.
• Read Entire Manual: Before attempting any installation or adjustment, thoroughly read and understand all instructions.
• 車両互換性: Ensure this suspension model is compatible with your specific motorcycle make, model, and year. Incorrect fitment can lead to severe safety hazards.
• トルク仕様: Always adhere to the motorcycle manufacturer's torque specifications for all fasteners.
• 定期点検: Periodically inspect the suspension for any signs of wear, damage, or leaks. Do not operate the motorcycle with damaged suspension components.
• 変更なし: Do not modify the suspension unit. Unauthorized modifications can compromise safety and performance, and will void the warranty.

3.製品オーバーview

The OHLINS S36PR1C1LB rear suspension is a high-performance shock absorber featuring a 36mm piston diameter and a piggyback reservoir. It offers multiple adjustment capabilities to fine-tune your motorcycle's handling and ride comfort.

主な特徴:

• S36PR1C1LB Type: Single tube shock absorber with a 36mm piston, piggyback reservoir, adjustable rebound damping, adjustable compression damping, and adjustable spring preload.
• Adjustable Rebound Damping: Allows control over the extension speed of the shock absorber.
• Adjustable Compression Damping: Allows control over the compression speed of the shock absorber.
• Adjustable Spring Preload: Enables setting the initial sag of the suspension.
• 車高調整: Provides a +/- 5mm adjustment range for vehicle height.
• Piggyback Reservoir: Separates oil and gas for consistent dampパフォーマンス。

4. セットアップ（インストール）

Proper installation is crucial for the performance and safety of your OHLINS suspension. If you are not confident in performing this procedure, seek assistance from a professional motorcycle mechanic.

一般的なインストール手順:

1. バイクを準備する: Secure the motorcycle on a suitable stand so that the rear wheel is off the ground and the swingarm can move freely.
2. Remove Original Shocks: Carefully remove the original rear shock absorbers, noting the orientation of all components, including washers and spacers.
3. Spacer Check: For Dyna Glide Family models, the number of included spacers may vary depending on the specific vehicle. If additional spacers are required for proper fitment, they must be purchased separately (OHLINS part number 3118-19). Ensure correct spacing to prevent interference and ensure proper alignment.
4. Install OHLINS Shocks: Mount the OHLINS S36PR1C1LB suspension units, ensuring all bolts are correctly aligned and hand-tightened. Pay attention to the orientation of the piggyback reservoir and adjusters.
5. トルクファスナー: Refer to your motorcycle's service manual for the correct torque specifications for the upper and lower shock mounting bolts. Tighten all fasteners to the specified torque.
6. 初期調整: Before riding, set the spring preload, rebound, and compression damping to the recommended base settings provided in the OHLINS documentation (if available) or to a neutral starting point.
7. 最終チェック: Before riding, double-check all fasteners, ensure no cables or hoses are pinched, and verify that the suspension moves freely through its full travel without obstruction.

5. 営業（調整）

The OHLINS S36PR1C1LB offers several adjustments to tailor the suspension performance to your riding style, load, and road conditions.

5.1. Spring Preload Adjustment

Spring preload determines the initial compression of the spring and affects the motorcycle's ride height and sag. Adjusting preload requires a C-spanner (not included) to turn the spring collar.

• Increase Preload: Turn the spring collar to compress the spring further. This raises the ride height and reduces sag, suitable for heavier loads or more aggressive riding.
• Decrease Preload: Turn the spring collar to release spring compression. This lowers the ride height and increases sag, suitable for lighter loads or a softer ride.
• 設定サグ: Consult your motorcycle's service manual or OHLINS guidelines for recommended sag settings. Sag is typically measured as the difference between the suspension's fully extended length and its length with the rider on board.

5.2. Rebound Damp調整する

リバウンドdamping controls the speed at which the shock absorber extends after compression. The adjuster is typically a knob or screw located at the bottom of the shock body.

• Increase Rebound (Slower): Turn the adjuster clockwise (or as indicated by markings). This slows down the extension, preventing the wheel from 'kicking up' over bumps.
• Decrease Rebound (Faster): Turn the adjuster counter-clockwise (or as indicated by markings). This speeds up the extension, allowing the wheel to follow the ground more effectively over successive bumps.

5.3. Compression Damp調整する

圧縮 damping controls the speed at which the shock absorber compresses. The adjuster is typically a knob or screw located on the piggyback reservoir.

• Increase Compression (Firmer): Turn the adjuster clockwise (or as indicated by markings). This makes the suspension feel firmer, resisting bottoming out under heavy loads or hard braking.
• Decrease Compression (Softer): Turn the adjuster counter-clockwise (or as indicated by markings). This makes the suspension feel softer, absorbing small bumps more effectively.

5.4. 車高調整

The S36PR1C1LB allows for a ride height adjustment of +/- 5mm. This adjustment is typically made by rotating the lower shock eyelet or a dedicated adjuster ring on the shock body. Consult the specific OHLINS documentation for the exact procedure.

• Adjusting Ride Height: Loosen the lock ring (if present) and rotate the adjuster to increase or decrease the overall length of the shock.
• 締め直す: Always re-tighten the lock ring after adjustment to prevent unwanted changes during operation.

重要： Make small, incremental adjustments and test the motorcycle's handling in a safe environment after each change. Keep a record of your settings.

6. メンテナンス

定期的なメンテナンスにより、OHLINS サスペンションの寿命が長くなり、パフォーマンスが安定します。

• クリーニング： Keep the shock absorbers clean. Wash them regularly with water and mild soap. Avoid high-pressure washers directly on seals.
• 検査： Periodically inspect the shock bodies, springs, seals, and mounting points for any signs of damage, wear, corrosion, or oil leaks. Check for loose fasteners.
• Seal Condition: Pay close attention to the condition of the shaft seals. If oil leakage is observed, the shock requires service.
• サービス間隔: OHLINS recommends periodic service by an authorized service center. The exact interval depends on riding conditions and usage, but typically ranges from 20,000 to 40,000 km or every 1-2 years.
• ストレージ： If storing the motorcycle for an extended period, ensure the suspension is clean and free of contaminants.

7。 トラブルシューティング

This section addresses common issues you might encounter with your suspension. For complex problems, consult an authorized OHLINS service center.

8. 仕様

9. 保証

OHLINS products are manufactured to high standards and come with a limited warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and product. Please retain your proof of purchase. For detailed warranty information, refer to the official OHLINS website or contact your authorized OHLINS dealer.

The warranty does not cover damage resulting from improper installation, misuse, neglect, unauthorized modifications, or normal wear and tear.

10. サポート

For technical assistance, spare parts, or service, please contact your authorized OHLINS dealer or distributor. You can also visit the official OHLINS website for product information, FAQs, and contact details for your region.

OHLINS Official Webサイト： www.オーリンズ.com