セントリーセーフ P021E

SentrySafe P021E Portable Digital Keypad Safe Box User Manual

モデル: P021E

1.製品オーバーview

The SentrySafe P021E Portable Digital Keypad Safe Box is designed to provide secure storage for small valuables. Its robust steel construction, digital keypad, and backup key access offer reliable protection. The integrated carrying handle and compact design make it ideal for on-the-go security needs or discreet placement in various environments.

SentrySafe P021E Portable Safe Box with its carrying handle extended, highlighting its portability.

Image: SentrySafe P021E Portable Safe Box with its carrying handle extended, highlighting its portability.

This safe box is suitable for storing items such as cell phones, cash, passports, and other small, important documents or valuables.

2. セットアップ

2.1 開梱と初期検査

  • Carefully remove the safe box from its packaging.
  • Inspect the safe for any signs of damage. If damage is present, contact customer support.
  • Verify that all included components are present: 1 security box, 2 keys, and 1 tethering cable.

2.2 バッテリーの取り付け

The digital keypad requires 4 AA alkaline batteries for operation. For optimal performance and longevity, SentrySafe recommends using high-quality, name-brand alkaline AA batteries with an expiration date 8-10 years from the current year. Generic and rechargeable batteries may not provide sufficient power for long-term usage.

  1. Open the safe box using one of the provided keys.
  2. 蓋の裏側にある電池ボックスを見つけます。
  3. 電池ボックスのカバーをスライドさせて開きます。
  4. 正しい極性 (+/-) を確認して、単三電池 4 本を挿入します。
  5. Replace the battery compartment cover securely. Note: A loose battery cover can cause batteries to fall out, leading to loss of digital access.

2.3 個人の組み合わせを設定する

With the safe door open, you can set your personal digital combination.

  1. With the safe door open, locate the red programming button on the inside of the door, near the hinge.
  2. Press the red programming button. The yellow light on the keypad will illuminate.
  3. Enter your desired 3-8 digit combination on the keypad.
  4. Press the '#' button to confirm your new combination. The yellow light will flash and then turn off.
  5. ドアを閉める前に、ドアを開いた状態で新しい組み合わせをテストしてください。
SentrySafe P021E Portable Safe Box with digital keypad and backup key in the lock mechanism.

Image: SentrySafe P021E Portable Safe Box with digital keypad and backup key in the lock mechanism.

3. Operating the Safe Box

3.1 Opening with Digital Combination

  1. Enter your personal 3-8 digit combination on the keypad.
  2. Press the '#' button. The green light will illuminate.
  3. 5 秒以内にノブを時計回りに回して金庫のドアを開けます。

3.2 Opening with Backup Key

In case of forgotten combination or dead batteries, the safe can be opened with the backup key.

  1. キーパッド パネル上のキーホール カバーを見つけます。
  2. キーホールカバーを取り外します。
  3. Insert one of the provided keys into the keyhole and turn it clockwise.
  4. ノブを時計回りに回して金庫の扉を開けます。

3.3 閉じてロックする

  1. 金庫の扉をしっかり閉めてください。
  2. Turn the knob counter-clockwise to lock the safe. The red light will flash once to confirm locking.

Video: Demonstrating the operation of the SentrySafe P021E Portable Safe Box, including opening with the key and digital code, and showing the battery compartment.

4. メンテナンス

4.1 電池の交換

When the batteries are low, the red light on the keypad will flash rapidly when attempting to open the safe. Replace all four AA batteries promptly following the instructions in section 2.2. Always use new, high-quality alkaline batteries.

4.2 クリーニング

Clean the exterior of the safe box with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these may damage the finish or electronic components.

4.3 キーの保管

Store your backup keys in a secure location away from the safe box. Do not store them inside the safe, as they are essential for emergency access.

5。 トラブルシューティング

5.1 Safe Does Not Open with Digital Code

  • 間違った組み合わせ: Ensure you are entering the correct 3-8 digit combination.
  • バッテリー残量低下: If the red light flashes rapidly, replace the batteries as described in section 4.1.
  • Time Limit Exceeded: After entering the code, you have 5 seconds to turn the knob. Try again, ensuring you turn the knob promptly.

5.2 Loose Battery Cover

If the battery cover inside the lid is loose, the batteries may dislodge, causing loss of power to the digital keypad. Ensure the cover is securely fastened after battery installation. If the cover is damaged, contact customer support.

5.3 Lost Keys or Forgotten Combination

If you have lost your keys and forgotten your combination, contact SentrySafe customer support for assistance. Proof of ownership may be required.

6. 仕様

特徴詳細
モデル番号P021E
外形寸法(幅×奥行き×高さ)13インチx10インチx4.4インチ(33 cm x 25.4 cm x 11.2 cm)
内寸(幅×奥行×高さ)12インチx8.9インチx4.3インチ(30.5 cm x 22.6 cm x 10.9 cm)
容量0.23 立方フィート
アイテム重量4.6ポンド(2.09kg)
材料合金鋼
ロックタイプDigital Keypad Lock, Key
電源単4形アルカリ電池XNUMX本(別売り)
特集Portable, Carrying Handle
Diagram illustrating the exterior and interior dimensions of the SentrySafe P021E Portable Safe Box.

Image: Diagram illustrating the exterior and interior dimensions of the SentrySafe P021E Portable Safe Box.

7. 保証とサポート

The SentrySafe P021E Portable Digital Keypad Safe Box comes with a manufacturer's limited warranty. For detailed information regarding warranty coverage, terms, and conditions, please refer to the official SentrySafe webサイトをご覧いただくか、カスタマー サポートに直接お問い合わせください。

For technical assistance, replacement parts, or any other inquiries, please visit the SentrySafe support page or contact their customer service department.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.