ヒマラヤングロー 1002

WBM Himalayan Salt Lamp ユーザーマニュアル

Your guide to setting up, operating, and maintaining your natural Himalayan Salt Lamp.

WBM Himalayan Salt Lamp with its packaging box

The WBM Himalayan Salt Lamp, a natural crystal lamp designed to enhance your living space.

導入

Thank you for choosing the WBM Himalayan Salt Lamp. Crafted from 100% natural Himalayan salt crystals, this lamp provides a warm, inviting glow and is believed to offer air-purifying benefits. Each lamp is uniquely carved, ensuring a distinctive piece for your home or office. This manual will guide you through the proper setup, operation, and care to ensure you get the most out of your salt lamp.

製品終了view

Your WBM Himalayan Salt Lamp comes with the following components:

  • Himalayan Salt Crystal: lの本体amp, hand-carved from natural salt.
  • 木製ベース: A sturdy and elegant base that supports the salt crystal.
  • LED電球: An energy-efficient LED bulb designed for long-lasting illumination.
  • USB Power Cable with Touch Dimmer Control: Allows for easy power on/off and brightness adjustment.
Diagram showing the LED bulb, E12 base, 5V USB power adapter, and dimmer switch components of the salt lamp

Illustration of the salt lamp's key components: the LED bulb, E12 base, USB power adapter, and dimmer switch.

セットアップ手順

Follow these steps to set up your Himalayan Salt Lamp:

  1. 開梱: パッケージからすべてのコンポーネントを慎重に取り出します。
  2. 検査: Check the salt crystal and wooden base for any damage.
  3. 電球を挿入します: Gently insert the LED bulb into the bulb holder located within the wooden base. Ensure it is securely seated.
  4. クリスタルを配置する: Carefully place the salt crystal onto the wooden base, aligning it so the bulb is centered within the crystal's cavity.
  5. 接続電源: Plug the USB end of the power cable into a compatible USB power source (e.g., computer USB port, USB wall adapter, power bank).
Diagram illustrating how to install the LED light into the salt lamp ベース

Visual guide for inserting the LED bulb into the lampの木製ベース。

操作手順

Your WBM Himalayan Salt Lamp features a convenient touch dimmer control:

  • 電源オン/オフ: Tap the power symbol on the dimmer control once to turn the lamp オンまたはオフ。
  • 明るさを調整: 一度lamp is on, press and hold the power symbol on the dimmer control. The brightness will gradually increase or decrease. Release your finger when you reach your desired brightness level.
Hand demonstrating the touch dimmer control on the salt lamp's USB cable

A hand operating the touch dimmer control on the lamp's USB cable to adjust brightness.

Person meditating in a room with the glowing Himalayan salt lamp, creating a relaxing ambiance

塩 lamp provides a relaxing ambiance, ideal for meditation or creating a calming environment.

メンテナンス

Proper care will ensure the longevity and effectiveness of your salt lamp:

  • クリーニング: 掃除するにはamp, gently wipe the salt surface with a dry or slightly damp 布。 Do not use excessive water or immerse the lamp 液体中。
  • 水分: 塩lamps are hygroscopic, meaning they absorb moisture from the air. In humid environments, the lamp may appear to 'sweat'. Place a coaster or mat underneath to protect furniture. If sweating occurs, turn the lamp on for a few hours to dry it out.
  • 電球の交換: LED電球の交換が必要な場合は、amp is unplugged. Carefully remove the salt crystal from the base, unscrew the old bulb, and screw in a new compatible LED bulb (E12 base, 15 watts recommended).
  • ストレージ: lを保存する場合amp for an extended period, wrap it in a plastic bag or airtight container to protect it from moisture.

トラブルシューティング

問題考えられる原因解決
Lamp 点灯しません。電源が入らない、接続が緩んでいる、電球が故障している。Ensure USB cable is securely plugged in. Try a different USB port or adapter. Check if the bulb is properly seated or needs replacement.
Lamp is 'sweating' or dripping water.高湿度。This is normal in humid conditions. Keep the lamp on for several hours to dry it out. Place a protective mat underneath. Avoid placing in high-humidity areas like bathrooms.
明るさを調整できません。Dimmer malfunction.Ensure you are pressing and holding the touch control. If the issue persists, the dimmer unit may be faulty and require replacement.

仕様

特徴詳細
モデル番号1002
材料Natural Himalayan Salt Crystal
ベース素材木材
製品寸法奥行き5インチ x 幅5インチ x 高さ9インチ
アイテム重量6 Pounds (approx. 5-7 lbs)
光源の種類導かれた
ワットtage15ワット
巻tage120ボルト
スイッチタイプTouch Dimmer Control
ケーブル長さ72インチ
電源USBコード付き電気
屋内/屋外での使用屋内のみ
組み立てが必要はい(軽微)
認定資格UL、ETL

保証とサポート

保証情報

WBM LLC warrants its products to be free from defects in material and workmanship for 30 days from the shipment date unless otherwise noted. WBM LLC will replace any item returned within the parameters of this policy and found to be defective. All returned warranty-issue merchandise must be properly packed for a safe return shipment and in original purchase condition with the original packaging, the original receipt/invoice/packing slip, and an explanation of the item's problem. WBM LLC will not refund, credit, or cover shipping expenses for warranty item returns or warranty item replacements under any circumstances. WBM LLC is not liable for misuse of its products. This warranty does not cover damage due to abuse, neglect, alteration, failure to follow instructions, shipping damage, or damaged packaging. WBM LLC expressly disclaims all express warranties not stated herein and all implied warranties, including the implied warranties of merchantability and fitness for a particular purpose.

カスタマーサポート

For any questions, concerns, or technical assistance not covered in this manual, please refer to the contact information provided with your product packaging or visit the official Himalayan Glow webサポート リソースのサイト。

© 2024 Himalayan Glow. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.