Tempo Communications NC-100 Professional Wiring Tester

製品終了view

The Tempo Communications NC-100 is a versatile digital wiring tester designed for professional use in telecommunications and data networking. This compact device accurately tests shielded twisted pair (STP), unshielded twisted pair (UTP), and coaxial cables, identifying common wiring faults such as shorts, opens, reversed polarity, crossed pairs, and split pairs. It also features a tone generator for efficient cable tracing and troubleshooting.

フロント view of the Tempo Communications NC-100 Professional Wiring Tester, showcasinコンパクトなデザインとディスプレイが特徴です。

セットアップと初期使用

Before operating your NC-100 tester, ensure a 9V battery is correctly installed. The battery compartment is typically located on the rear of the device. Once the battery is in place, the unit is ready for use. The NC-100 is designed for straightforward operation, allowing technicians to quickly assess cable integrity.

詳細 view of the NC-100 showing its LCD display and the removable remote test unit, which is essential for end-to-end cable testing.

操作手順

ケーブルテスト

The NC-100 can test various cable types. For twisted pair cables (UTP/STP), connect one end of the cable to the RJ45 or RJ12 port on the main unit and the other end to the corresponding port on the removable remote test unit. For coaxial cables, use the F-Type female threaded connectors. The device will then display the wiring configuration and identify any faults.

A hand connecting a coaxial cable to the Tempo Communications NC-100, demonstrating its capability to test various cable types.

The NC-100 connected to an RJ45 cable, illustrating its ability to detect shorts, opens, reversed polarity, crossed, and split pairs.

Tone Generation for Tracing

To trace cables, the NC-100 generates three distinct, selectable digital tone patterns at 577 Hz and 983 Hz. Connect the tester to the cable you wish to trace. Use a compatible tone probe (not included) to locate the other end of the cable. The selectable cadences assist in distinguishing between multiple cables.

The NC-100 main unit and its remote test unit, demonstrating the setup for generating digital tone patterns for cable tracing.

A close-up of the NC-100's display showing network test results, highlighting its accuracy and ease of use for professional-grade testing.

公式製品ビデオ

メンテナンス

To ensure the longevity and accuracy of your NC-100 tester, keep it clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid exposing the device to extreme temperatures or moisture. Replace the 9V battery promptly when the low battery indicator appears to maintain optimal performance. Some users have noted the device's durability over extended periods of use.

トラブルシューティング

• Frequent Resets: If the unit resets unexpectedly, ensure the battery is fully charged and securely seated. A weak battery can cause erratic behavior.
• Inaccurate Readings/Test Fails: Verify that all cable connections are secure and properly seated in the RJ45, RJ12, or F-Type ports. Loose connections can lead to false readings.
• Tone Not Audible/Tone Test Aborted: Check the battery level. If Power over Ethernet (PoE) is present on the line, the tone test may be aborted (indicated by "more than 5V detected"). Disconnect PoE before attempting tone tracing.
• 電源なし: Check the 9V battery. Ensure it is new or fully charged and inserted with correct polarity.

For persistent issues not covered here, please refer to the official Tempo Communications support resources.

仕様

保証とサポート

For specific warranty information and technical support regarding your Tempo Communications NC-100, please contact Tempo Communications directly. Details can typically be found on their official website or through the contact information provided with your product packaging. While third-party protection plans may be available, direct manufacturer support is recommended for product-specific inquiries and warranty claims.

Tempo Communications is committed to providing high-quality tools and support to professionals in the field.