Instructions for Hiway Integrated Circuit models including: HW48244, 2BLDF-HW48244, 2BLDFHW48244, HW48244 TPMS Sensor, HW48244, TPMS Sensor
Guangdong Hiway Integrated Circuit Technology Co., Ltd. HW48244 2BLDF-HW48244 2BLDFHW48244 hw48244
PRODUCT NAME TPMS SENSOR---Part No.HW48244-SGY-100 Function Summary Regularly measure the tire pressure and temperature, and monitor the motion of tire. PRODUCT SPECIFICATION Parameter Operating Temperature Storage Temperature RF Modulation Technique RF Carrier Frequency FSK Deviation RF Baud Rate Radiated Power LF Modulation Technique LF Carrier Frequency LF Baud Rate Pressure Range Battery Specification -40~125 -40~125 FSK 433.920MHz±10kHz 60kHz 9600bps <-20dBm ASK 125kHz±5kHz 3900bps 100~1500kPa CR2050HR PRODUCT APPEARANCE FCC CERTIFICATION Model: HW48244-SGY-100 FCC ID: 2BLDF-HW48244 FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. MODIFICATION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the device. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure rules as this equipment has very low levels of RF energy.Microsoft Word 2016