PowerLocus Buddy User Manual

How to Charge the Headphones?

Please DO NOT use QUICK Charging adapters with Charging Voltage upper than: DC 5V. Any normal adapters from iPhone, Samsung Phone etc. would be suitable for your headphones. We recommend you to charge the headphones from laptop as the best way of charging.

Specifications

Working Distance Range: 10 M

Charging Time: About 4 hours

Playing Time: About 13 hours

Supported profiles :HFP/HSP/A2DP/AVRCP

Speaker Size: 40mm

Impedance: 32 Ohm

Audio Sensitivity: 85dB

Frequency Response: 20Hz-20kHz

Input: 5V ⎓ 1A

Wireless range: 10-12m

Bluetooth Version: 5.3

Bluetooth Specification: Power Class 2

Frequency band: 2.402-2.480GHz

Operating frequency: 2402-2480MHz

Rated power consumption: 10 mW

Maximum output power: < 7dBm

Operating Temperature: 0 °C to 45 °C

Compliance Marks: FC, RoHS, UKCA, CE

Certification Numbers: 214-112661, IC: 27972-P20227

Button Description

M button: [mode switch] - Three kinds of playback modes switch (TF Mode, Bluetooth Mode, flashing lights on/off switch).

Play/Pause/Power/Call button ( / ): [power/play/pause/answer/reject/redial] - ON/OFF Switch/ Play or Pause Music/ Answer or Reject Calls/ Double press for re-dialing the last number.

Volume/Track buttons:

• |/V+: [next song]/[volume up] - Long press for Next song / Short press for increasing volume.
• |/V-: [previous song]/[volume down] - Long press for Previous song/ Short press for reducing volume.

HOW TO CHANGE THE MAXIMUM VOLUME LIMIT:

(Note: The provided OCR does not contain specific instructions for this section, only the heading.)

LED Indicator Light Status

Bluetooth Function Description

1) Pairing Operations

1. When you pair via Bluetooth for the first time: Turn on the headphone by holding the ON/OFF button for 3-5 seconds. It will boot into Bluetooth mode automatically, voice prompt "Bluetooth Mode". Open your smart device's Bluetooth searching function, and select the device "PowerLocus Buddy". After successful pairing, voice prompt "Connected", LED indicator lights blue.
2. If the paired device is off the smart device's Bluetooth: The headphone will automatically connect to the last paired device in 3 seconds after boot.
3. Pairing to previously connected devices: After power on, the headphone will automatically connect to the last connected device in 3 seconds after boot.
4. Connecting two devices at the same time: When you need to connect the headphone with the second device, please turn off the Bluetooth of the first device first. Then turn on the headphone and search for "PowerLocus Buddy" on the second device. After successful pairing, voice prompt "Connected", LED indicator lights blue. Re-open the Bluetooth of the first device to connect.

Note: If the headphone is not in pairing mode, please turn off the headphone and turn it on again to enter pairing mode. Do not perform other operations when sending Bluetooth to prevent the program from failing.

Micro SD Card Playback Mode

1. Insert the Micro SD Card, it will prompt "Music". The device supports MP3, WMA format playback.

2. You can switch between modes by long pressing the M button to turn on/off the flashing lights.

Line-in Mode

1. Connect the headphone with your device using a 3.5mm audio cable.

2. It will prompt "Line-in Mode". Then it plays audio from the connected device.

3. The buttons and Bluetooth function will be disabled in Line-in mode.

Safety and Precautions

• Please select the appropriate volume in use to prevent damage to your hearing.
• Please note that a good charging environment can avoid damage to the product.
• Do not use the headphones while charging the headphones after a long time.
• This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
• Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Compliance Information

Hereby GL Grup-2015 LTD declares that PowerLocus Buddy is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.

Company: GL GRUP-2015 LTD

Address: 36 VASIL LEVSKI STREET, 5376 DRYANOVO, BULGARIA

The full text of the EU Declaration of Conformity is available at: [URL for EU Declaration of Conformity - not provided in OCR]

To find out more about the UK Declaration of Conformity: [URL for UK Declaration of Conformity - not provided in OCR]

(Note: Specific URLs for declarations were not fully extracted from the OCR.)