מדריכים ומדריכים למשתמש של VIPER

צֶפַע is the world's best-selling vehicle security and remote start brand, manufactured by VOXX Electronics. Renowned for its cutting-edge technology and reliability, VIPER offers a comprehensive range of automotive protection products, including 2-way security systems, remote starters, and keyless entry modules.

The brand pioneered the connected car category with VIPER SmartStart, an app that allows users to start, lock, unlock, and track their vehicles directly from a smartphone. VIPER products are designed for professional installation and seamless integration with modern vehicle electronics, providing drivers with peace of mind and advanced control over their cars.

• How do I exit Valet Mode on my VIPER system?

  To exit Valet Mode, typically turn the ignition ON and then OFF, then press and release the Control Center (Valet) button one time. The status LED should change to indicate the mode has been exited.

• How do I replace the battery in my VIPER remote?

  Use a small flat blade or coin to carefully pry open the remote case. Most VIPER remotes use CR2016, CR2032, or CR2450 batteries. Check the specific model number on the back of your remote for the correct battery type.

• Where can I find the Control Center in my vehicle?

  The Control Center (antenna) is usually mounted on the upper part of the front windshield behind the rearview mirror. It contains the Status LED and the Valet/Control button used for programming.

• Why is my VIPER remote not working?

  First, check if the battery needs replacement. If the battery is good, the remote may need to be re-paired with the system, or the system might be in Valet Mode. Consult the owner's guide for re-pairing instructions specific to your model.