WORKPRO 96x24" Heavy-Duty Adjustable Workbench Instruction Manual

מָבוֹא

This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your WORKPRO 96x24" Heavy-Duty Adjustable Workbench. Please read this manual thoroughly before use to ensure safe and efficient operation and to maximize the lifespan of your workbench.

The WORKPRO workbench is designed for demanding tasks in garages and workshops, featuring a robust construction and versatile functionalities.

מידע בטיחות

Always follow basic safety precautions when using this workbench to reduce the risk of injury or damage. Keep the work area clean and well-lit. Ensure the workbench is placed on a stable, level surface before use. Do not exceed the maximum load capacity of 4000 lbs.

• ודא שכל המחברים מהודקים היטב לפני השימוש.
• אין לעמוד או לטפס על שולחן העבודה.
• Distribute weight evenly across the workbench surface.
• Keep children and unauthorized persons away from the workbench during use.
• Disconnect power from the integrated power outlet when not in use or during maintenance.

רשימת רכיבים

Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, contact customer service.

התקנה והרכבה

Assembly typically takes 15 minutes with clear instructions. It is recommended to have a Phillips screwdriver or electric drill with a screwdriver attachment, and a small drill for pilot holes, as some users have noted that pilot holes may not be pre-drilled for all screws.

שלבי הרכבה:

1. חבר את הרגליים: Secure the leg assemblies to the workbench top using the provided hardware. Ensure the dual-screw fastening points are aligned.


Figure 1: Attaching the workbench legs to the tabletop. Note the dual-screw fastening for stability.

2. Secure the Bezel: Attach any bezels or support beams as indicated in the instructions to reinforce the structure.


Figure 2: Securing the bezel to the workbench frame for added structural integrity.

3. התאם את הגובה: The workbench offers 6 adjustable heights from 28-3/4" to 38-1/2". Adjust each leg to your desired height setting (indicated by pre-drilled holes) and secure with the provided fasteners.

Figure 3: Diagram showing the six adjustable height options for the workbench, ranging from 28-3/4 inches to 38-1/2 inches.
4. Connect the Leveling Feet: Screw the height-adjustable leveling feet into the bottom of each leg. Adjust them to compensate for uneven floors and ensure the workbench is perfectly level and stable.


Figure 4: Installation and adjustment of the height-adjustable leveling feet to ensure workbench stability.

5. Install Pegboard and Hooks: Attach the side-mounted pegboard. Insert the 10 long (3.9 in) and 10 short (2.2 in) hooks into the pegboard holes to organize your tools.


Figure 5: The double-sided pegboard with various tools hung on the included hooks, demonstrating organized storage.

6. חיבור שקע חשמל: Ensure the ETL-certified power strip is securely integrated into the workbench. Plug the 5FT power cord into a suitable wall outlet.

Figure 6: Close-up of the multi-functional power outlet, featuring 4 AC outlets, 1 USB port, and 1 Type-C port.

הוראות הפעלה

כוונון גובה שולחן העבודה:

To adjust the height, loosen the fasteners on each leg, slide the inner leg section to the desired height setting (indicated by pre-drilled holes), and re-tighten the fasteners securely. Ensure all legs are set to the same height for a level work surface. The workbench can be adjusted for sitting (28-3/4") or standing (up to 38-1/2") use.

Figure 7: The workbench demonstrating its adjustable height feature, suitable for both seated and standing work positions.

שימוש בשקע החשמל:

The integrated power strip provides convenient access to power for your tools and devices. It includes 4 AC outlets, 1 USB port, and 1 Type-C port. Plug the workbench's main power cord into a grounded wall outlet. Use the power strip's on/off switch to control power to the outlets. Always ensure tools and devices are within the power strip's electrical limits.

Utilizing the Pegboard:

The side-mounted pegboard and included hooks allow for organized storage of frequently used tools and accessories, keeping your workspace tidy and efficient.

תַחזוּקָה

• ניקוי: Wipe the rubber wood top with a damp cloth and mild detergent. Avoid harsh chemicals that may damage the wood finish. Clean the metal frame with a damp בַּד.
• בדיקת מחבר: Periodically check all screws and bolts for tightness. Re-tighten as necessary to maintain stability and safety.
• טיפול במשטח עץ: The 1.2-inch thick solid rubber wood top is durable. To prolong its life and appearance, consider applying a wood conditioner or sealant periodically, especially if exposed to moisture or heavy use.
• בטיחות חשמל: Inspect the power cord and power strip for any signs of damage. Do not use if damaged.

פתרון בעיות

מפרטים

• דֶגֶם: W082191AE
• מידות (L x W): 96 אינץ' x 24 אינץ'
• טווח גובה מתכוונן: 28-3/4 אינץ' עד 38-1/2 אינץ'
• כושר העמסה: 4000 פאונד
• חומר שולחן: 1.2-inch thick Solid Rubber Wood
• חומר מסגרת: Industrial-grade Q195 Square Tubes, SPCC Panels (Metal)
• שקע חשמל: ETL/FCC-certified, 4 AC outlets, 1 USB port, 1 Type-C port, 5FT power cord
• לוח יתדות: Side-mounted, includes 20 hooks (10 long, 10 short)
• פִּלוּס: Height-adjustable leveling feet
• נדרשת הרכבה: כֵּן
• מותג: WORKPRO
• יַצרָן: חברת האנגג'ואו גרייטסטאר תעשייתית בע"מ
• GTIN/UPC: 820909628316

אחריות ותמיכה

For warranty information or technical support, please refer to the documentation included with your purchase or contact WORKPRO customer service directly. Our expert customer service team is available to assist with any issues related to your workbench.

פרטי קשר ניתן למצוא בדרך כלל באתר היצרן webבאתר או על אריזת המוצר.