מדריך למשתמש של מתג KVM HDMI של TESmart

המוצר נגמרview

The TESmart HDMI KVM Switch is designed to allow two computers or laptops to share a single set of keyboard, mouse, and monitor. This device is ideal for home and office setups, gaming consoles, and streaming devices, providing efficient multi-device management.

Figure 1: TESmart HDMI KVM Switch and included cables.

Key features include Ultra HD 4K@60Hz resolution support, EDID emulators to prevent display setting changes, seamless zero-latency keyboard and mouse switching, and wide operating system compatibility.

הוראות התקנה

Follow these steps to set up your TESmart HDMI KVM Switch:

1. חיבור מחשבים: Use the provided KVM cables (HDMI+USB A/B) to connect your two computers to the KVM switch's Input 1 and Input 2 ports. Ensure both the HDMI and USB-B ends of each cable are connected to the respective computer.
2. חבר את המסך: Connect your monitor to the HDMI Output port on the KVM switch using an HDMI cable (not included).
3. חיבור מקלדת ועכבר: Plug your wired or wireless (with 2.4G receiver) keyboard and mouse into the dedicated keyboard and mouse USB ports on the KVM switch. The upgraded pass-through mode ensures wide compatibility. Note: Wireless Bluetooth keyboards and mice are not supported.
4. חיבור ציוד היקפי (אופציונלי): Utilize the additional USB 2.0 port to connect other peripheral devices such as a USB hub, USB drive, printer, or scanner. Note: Hotkey switching is not supported when the keyboard is connected to this USB 2.0 port.
5. חבר שמע (אופציונלי): For stereo audio output, connect headphones or a 3-segment 3.5mm earpiece device to the L/R Out 3.5mm Audio Jack port.
6. הפעלה: Connect the DC 5V power adapter to the KVM switch and plug it into a power outlet. Turn on the KVM switch using the power switch.

Figure 2: Diagram illustrating the connection of two PCs and one monitor to the KVM switch.

איור 3: מפורט view of the KVM switch's input and output ports.

הוראות הפעלה

The KVM switch offers multiple convenient methods for switching between connected computers:

• לחצן הלוח הקדמי: Press the 'Select' button on the front panel of the KVM switch to cycle through the connected computers.
• שלט רחוק IR: Use the included IR remote control to switch directly to a specific input (e.g., press '1' for PC1, '2' for PC2). Note: AAA batteries are required for the remote control and are not included.
• מקשי קיצור במקלדת: Utilize specific keyboard hotkey combinations for quick switching:
  • Press 'Scroll Lock' key twice + 'Page Up' to select the previous input port.
  • Press 'Scroll Lock' key twice + 'Page Down' to select the next input port.
  • Press 'Scroll Lock' key twice + '1' or '2' to select a specific input port (e.g., '1' for PC1, '2' for PC2).
• Mouse Gesture: Double-hit the left or right bound of the screen with the mouse pointer to switch inputs.
• סריקה אוטומטית: The KVM switch can be configured to automatically loop among all powered input sources within a specified time interval.

Figure 4: Various methods for switching between computers, including front panel button, IR remote, keyboard hotkeys, and mouse gesture.

מפרטים

תַחזוּקָה

To ensure the longevity and optimal performance of your TESmart HDMI KVM Switch, consider the following:

• Keep the device in a clean, dry environment, away from excessive dust, moisture, and extreme temperatures.
• הימנעו מהנחת חפצים כבדים על גבי המתג.
• Gently clean the exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• ודא שכל הכבלים מחוברים היטב כדי למנוע אובדן אות או בעיות לסירוגין.

פתרון בעיות

If you encounter any issues with your KVM switch, please refer to the official Troubleshooting Guide (PDF) available at: מדריך לפתרון בעיות (PDF).

Common issues and basic checks include:

• אין תצוגה/אות: Ensure all HDMI cables are securely connected to both the KVM switch and the computers/monitor. Verify the correct input is selected on the KVM switch.
• מקלדת/עכבר לא מגיבים: Check that the keyboard and mouse are plugged into the dedicated USB ports. If using wireless, ensure the receiver is properly inserted and batteries are charged. Try restarting the KVM switch.
• Display Settings Change After Switching: The built-in EDID emulators should prevent this. Ensure your monitor and graphics drivers are up to date.
• בעיות מקשי קיצור: Confirm the keyboard is connected to the dedicated keyboard USB port. Hotkey switching is not supported if the keyboard is connected to the USB 2.0 peripheral port.

אחריות ותמיכה

The TESmart HDMI KVM Switch comes with a 1-year warranty from the date of purchase.

For any questions, concerns, or technical assistance, please reach out to our customer experience design team. You can contact TESmart directly through the Amazon platform by navigating to the product page, clicking on 'Sold by TESmart', and then selecting 'Ask a question'.

Figure 5: TESmart offers 24/7 technical support.