GoldenMask Deephunter Pro 7SE Instruction Manual

1. הקדמה

The GoldenMask Deephunter Pro 7SE is an advanced pulse induction (PI) metal detector designed for efficient and precise metal detection. It features a fully automatic ground exclusion balance (AGEB) for ease of use, making it suitable for both beginners and experienced users. The detector offers excellent depth and stability, enhanced by its new Smart Tune Technology.

For experienced users seeking maximum detection depth, the Pro 7SE includes a manual ground balance function, adjustable via a 10-turn fine tuning potentiometer (helipot). A key feature is the TRASH REJECT function, allowing users to filter detection responses to focus on large targets or include all target sizes. The Auto Ground Balance continuously tracks ground conditions in real-time, eliminating the need for manual adjustments during operation. Metallic objects are identified by two distinct LED indicators: a red LED for non-ferrous metals and a green LED for iron and other ferrous metals.

תכונות עיקריות:

• Pulse Induction Technology
• 667 Hz Operating Frequency
• Automatic Ground Balance (AGEB)
• Manual Ground Balance for advanced users
• TRASH REJECT function
• LED indicators for metal identification (red for non-ferrous, green for ferrous)
• Wide range of REJECT controls
• Fully Rechargeable system

2. התקנה

Proper assembly and initial setup are crucial for optimal performance of your GoldenMask Deephunter Pro 7SE. Follow these steps carefully:

2.1 פירוק וזיהוי רכיבים

הוציאו בזהירות את כל הרכיבים מהאריזה. ודאו שכל החלקים נמצאים:

• Control Box with integrated battery
• Telescopic Shaft Assembly
• Search Coils (e.g., large frame coil, smaller round coils)
• מתאם טעינה
• חיבור כבלים
• Carrying Bag/Pouch

איור 2.1: מעלview of the GoldenMask Deephunter Pro 7SE components, showing the main control unit, the large frame search coil, two smaller round search coils, the telescopic shaft, and various accessories like the charger and carrying pouch.

2.2 Assembling the Detector

1. Attach the Control Box: Securely mount the main control box to the designated position on the telescopic shaft. Ensure it is firmly attached to prevent movement during operation.
2. Connect the Search Coil: Select the desired search coil (e.g., the large frame coil for deep targets or a smaller round coil for general use). Attach the coil to the lower end of the telescopic shaft using the provided hardware. Ensure the coil is oriented correctly and can pivot freely.
3. חיבור כבל סליל: Carefully plug the search coil cable into the "SEARCH COIL" port on the control box. Ensure the connection is secure and the cable is routed neatly along the shaft to prevent snagging.
4. כוונון אורך הפיר: Extend or retract the telescopic shaft to a comfortable operating length. The detector should allow you to sweep the coil parallel to the ground without excessive bending or stretching.

2.3 טעינה ראשונית

Before first use, fully charge the internal battery of the control box. Connect the charging adapter to the "CHARGE" port on the control box and plug it into a standard electrical outlet. The LED indicator on the control box will show charging status. A full charge typically takes several hours. Do not overcharge the battery.

3. הוראות הפעלה

Understanding the controls and functions of your Deephunter Pro 7SE will maximize your detection success.

3.1 לוח הבקרה נגמרview

איור 3.1: מפורט view of the GoldenMask Deephunter Pro 7SE control panel, highlighting the signal meter, battery check button, Smart Tune button, Reject/Ground Balance knob, Audio Tone knob, Sensitivity knob, and Volume knob.

• SIGNAL Meter: Displays signal strength and target identification.
• כפתור בדיקת סוללה: Press to check battery level.
• Smart Tune Button: Activates the Smart Tune Technology for automatic ground balance and optimal performance.
• REJECT/GB Knob: Controls the TRASH REJECT function and adjusts manual ground balance.
• AUDIO TONE Knob: Adjusts the audio frequency of target signals.
• SENSITIVITY Knob: Controls the detector's sensitivity to targets. Higher sensitivity increases depth but may also increase noise.
• ידית VOLUME: מכוונן את עוצמת פלט השמע.
• GAIN Switch (HIGH/LOW): Adjusts the overall gain of the detector. Use HIGH for maximum depth, LOW for noisy environments or smaller targets.
• מחווני LED: Red for non-ferrous metals, Green for ferrous metals.

3.2 הפעלה והגדרות ראשוניות

1. הפעלה: Turn the VOLUME knob clockwise until the unit powers on.
2. אוזניות (אופציונלי): Plug headphones into the "PHONES" jack for clearer audio and to conserve battery.
3. Smart Tune Activation: Press the "Smart Tune" button. The detector will automatically perform a ground balance. This is the recommended setting for most users.
4. Manual Ground Balance (Advanced): For experienced users, set the REJECT/GB knob to "MAN. GB" and adjust the 10-turn potentiometer for precise ground balance. Refer to advanced guides for this procedure.
5. התאם את הרגישות: Start with the SENSITIVITY knob at a medium setting. Increase it gradually until you hear a stable threshold hum. If the detector becomes unstable or noisy, reduce sensitivity.
6. התאם את עוצמת הקול: Set the VOLUME to a comfortable listening level.

3.3 Detecting Targets

Sweep the search coil slowly and steadily from side to side, keeping it parallel to the ground and as close as possible without touching. Overlap each sweep by about half the coil's diameter.

• When a target is detected, the SIGNAL meter will show a deflection, and an audio tone will be emitted.
• שימו לב למחווני ה-LED:
  • נורת LED אדומה: Indicates a non-ferrous metal (e.g., gold, silver, copper, aluminum).
  • נורית LED ירוקה: Indicates an iron or other ferrous metal target.
• Pinpoint the target by narrowing your sweeps and moving the coil in an "X" pattern over the strongest signal.

3.4 TRASH REJECT Function

The REJECT/GB knob also controls the TRASH REJECT function. This allows you to filter out unwanted smaller targets or ground noise.

• Rotate the REJECT/GB knob to adjust the rejection level.
• A higher reject setting will ignore smaller or less conductive targets, focusing on larger or more valuable finds.
• Experiment with this setting in different environments to find the optimal balance for your search goals.

4. תחזוקה

Regular maintenance ensures the longevity and optimal performance of your GoldenMask Deephunter Pro 7SE.

• ניקוי: After each use, wipe down the control box and search coil with a damp cloth to remove dirt, dust, and moisture. Avoid using harsh chemicals or abrasive cleaners.
• הגנה על סליל: If detecting in rough terrain, consider using a coil cover (if available) to protect the search coil from scratches and impacts.
• טיפול בסוללה:
  • יש לטעון תמיד את הסוללה במלואה לפני אחסון ממושך.
  • Recharge the battery every 3-6 months even if not in use to maintain battery health.
  • Store the detector in a cool, dry place, away from extreme temperatures.
• בדיקת כבלים: Periodically inspect all cables for signs of wear, fraying, or damage. Replace damaged cables immediately to prevent performance issues or safety hazards.
• אִחסוּן: Disassemble the detector if necessary for compact storage. Store it in its original packaging or a protective carrying case to prevent damage.

5. פתרון תקלות

This section addresses common issues you might encounter with your Deephunter Pro 7SE.

אם נתקלת בבעיות שאינן מופיעות כאן, או אם הפתרונות המוצעים אינם פותרים את הבעיה, אנא פנה לתמיכת הלקוחות.

6. מפרטים

7. אחריות ותמיכה

7.1 מידע אחריות

For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official GOLDEN MASK website. Typically, products are covered against manufacturing defects for a specified period from the date of purchase. Keep your proof of purchase for warranty claims.

7.2 תמיכת לקוחות

If you require technical assistance, have questions about operation, or need to report a defect, please contact GOLDEN MASK customer support. Contact information can usually be found on the manufacturer's webבאתר או באריזת המוצר.

בעת פנייה לתמיכה, אנא הכינו את המידע הבא:

• Product Model: DHPRO7SE
• תאריך הרכישה
• תיאור מפורט של הבעיה