MARIE Hold Open Door Closer Instruction Manual

1. הקדמה

This manual provides comprehensive instructions for the installation, operation, and maintenance of the MARIE Hold Open Door Closer, Model FBA-1303D-B. Please read these instructions carefully before installation and use to ensure proper function and safety.

Image 1.1: MARIE Hold Open Door Closer (Model FBA-1303D-B). This image displays the main components of the door closer, including the closer body, arm, and mounting bracket, all in a black finish.

2. מידע בטיחות

• Ensure all mounting screws are securely fastened to prevent injury or damage.
• Do not attempt to disassemble the main body of the door closer, as it contains pressurized hydraulic fluid.
• Adjustments to closing and latching speeds should be made carefully to avoid sudden door movements.
• הרחיקו ידיים ואצבעות מחלקים נעים במהלך ההפעלה והכוונון.

3. תכולת החבילה

ודא שכל הרכיבים קיימים לפני תחילת ההתקנה:

• 1x MARIE Hold Open Door Closer Body
• 1x Main Arm Assembly
• 1x Parallel Arm Bracket
• חומרת הרכבה (ברגים, ברגים)
• Installation Template (typically included for accurate drilling)

Image 3.1: Included components. This image shows the door closer body, the arm assembly, and a set of mounting screws, illustrating the complete package contents.

4. מפרטים

Image 4.1: Temperature resistance. This image illustrates the door closer's ability to function reliably in extreme temperatures, from -40°C to 50°C, suitable for various indoor and outdoor conditions.

5. התקנה והתקנה

The MARIE door closer can be installed in three common configurations: Regular Arm, Top Jamb, and Parallel Arm. Choose the appropriate method for your door type and opening direction.

Image 5.1: Installation methods. This diagram shows three common installation types: Regular Arm (closer on pull/hinge side), Top Jamb (closer on frame on push/stop side), and Parallel Arm (closer on push/stop side).

5.1 שלבי התקנה כלליים

1. Determine Mounting Type: Refer to Image 5.1 to select the correct installation method for your door.
2. הכנת הדלת והמשקוף: Use the provided template (if included) to mark drilling locations on the door and door frame.
3. לקדוח חורים של טייס: Drill pilot holes at the marked locations. Ensure hole depth is appropriate for the screws.
4. Mount Closer Body: Secure the door closer body to the door or frame using the provided screws.
5. Attach Arm Assembly: Connect the main arm to the closer body and the secondary arm to the frame bracket.
6. התאם את אורך הזרוע: Adjust the arm length to achieve the desired door opening angle and closing force.
7. הידוק סופי: ודא שכל הברגים והחיבורים מהודקים היטב.

5.2 Product Dimensions and Power Adjustment

Understanding the dimensions and how to adjust the arm shoe can optimize installation and door operation.

Image 5.2: Dimensions and arm shoe adjustment. This image provides key dimensions of the door closer and illustrates how adjusting the arm shoe can modify the power required to open the door.

5.3 יישום Examples

The MARIE door closer is suitable for various door types in residential and commercial settings.

Image 5.3: Diverse door applications. This image displays the door closer installed on different door materials, including wooden, metal, fire-rated, and glass doors, demonstrating its versatility.

6. הוראות הפעלה והתאמות

The door closer features adjustable closing and latching speeds, as well as a hold-open function.

6.1 התאמת מהירות

The closing and latching speeds are controlled by two independent valves (Valve 1 and Valve 2) located on the closer body. Turning the screws clockwise decreases speed, and counter-clockwise increases speed.

• Valve 1 (Closing Speed): Controls the door's closing speed from approximately 15° to 90°.
• Valve 2 (Latching Speed): Controls the final latching speed from approximately 0° to 15°, ensuring the door closes gently and securely without slamming.

Image 6.1: Speed adjustment valves. This diagram highlights Valve 1 for closing speed (15°-90°) and Valve 2 for latching speed (0°-15°), indicating clockwise for slower and counter-clockwise for faster adjustments.

Important: Do not unscrew the valves completely out of the closer body, as this can cause hydraulic fluid leakage and render the unit inoperable.

6.2 Hold Open Function

When the door is opened beyond 90°, this door closer can maintain the door's position at any angle between 90° and 180°. To engage the hold-open function, simply open the door to the desired angle within this range, and the closer will hold it in place. To release, gently push the door to initiate closing.

Image 6.2: Adjustable speed and hold-open range. This image shows the two speed adjustment valves and a visual representation of the door's closing and latching phases, along with the 90°-180° hold-open positioning area.

Image 6.3: Soft close and buffer. This image demonstrates the soft closing mechanism, which prevents the door from slamming and protects hands from being caught, ensuring quiet and safe operation.

7. תחזוקה

The MARIE door closer is designed for minimal maintenance. Regular checks can ensure its longevity and optimal performance.

• בדיקה תקופתית: Annually inspect all mounting screws and arm connections for tightness. Tighten any loose fasteners.
• ניקוי: Wipe the closer body and arm with a soft, damp מטלית להסרת אבק ולכלוך. הימנעו מחומרי ניקוי שוחקים.
• נוזל הידראולי: The unit is factory-sealed with stable hydraulic fluid. No refilling or servicing of internal components is required or recommended.
• פעולה חלקה: If the door closer's operation becomes inconsistent, re-check speed adjustments (Section 6.1) and ensure no obstructions are interfering with the door's movement.

8. פתרון תקלות

9. אחריות ותמיכה

All MARIE hydraulic door closers are warranted for חמש שנים מתאריך הרכישה.

If you are not satisfied with the product, returns or exchanges are accepted within 30 days of purchase. For any quality issues or further assistance, please contact MARIE customer support.

For support, please refer to the contact information provided with your purchase or visit the official MARIE webאֲתַר.