מדריך הוראות למדיד עומק SharkBite UXLG03 וכלי להסרת שבבים בצינורות בגודל 1-1/4 עד 2 אינץ'

1. המוצר נגמרview

The SharkBite UXLG03 Depth Gauge and Pipe Deburring Tool is an essential accessory for preparing pipes for SharkBite push-to-connect fittings. This tool serves two primary functions: accurately marking the required insertion depth on the pipe and deburring the pipe's outer edge to ensure a smooth, secure connection.

This specific model is designed for pipes with diameters ranging from 1-1/4 אינץ' עד 2 אינץ'. It is compatible with various pipe materials, including copper, PEX, CPVC, PE-RT, and HDPE.

Image 1: The SharkBite UXLG03 Depth Gauge and Pipe Deburring Tool, showing its orange plastic construction and multiple pipe size openings.

2. מידע בטיחות

• Always wear appropriate personal protective equipment (PPE), such as safety glasses, when working with pipes and tools.
• Ensure the pipe is free of pressure and drained before cutting or deburring.
• Handle cut pipe edges with care as they may be sharp.
• Keep the tool clean and free of debris to ensure proper function.

3. התקנה והכנה

Before using the SharkBite UXLG03 tool, ensure your pipe is properly cut and ready for deburring and depth marking.

1. Cut the Pipe: Use a suitable pipe cutter to make a clean, square cut on the pipe. A square cut is crucial for a proper seal with SharkBite fittings.
2. Identify Correct Opening: The UXLG03 tool features multiple openings, each marked with a specific pipe diameter (1-1/4", 1-1/2", 2"). Select the opening that matches the diameter of your pipe.

Image 2: The SharkBite tool illustrating the various pipe size openings and the concept of marking the proper insertion depth for fittings.

4. הוראות הפעלה

Follow these steps to deburr your pipe and mark the insertion depth:

1. הכנס צינור: Gently insert the freshly cut end of the pipe into the corresponding size opening on the SharkBite UXLG03 tool. Push the pipe until it firmly contacts the internal stop.
2. Deburr the Pipe: While the pipe is inserted, rotate the tool around the pipe several times. The internal blades of the tool will remove any burrs or sharp edges from the outside diameter of the pipe. This step is critical to prevent damage to the O-ring inside the SharkBite fitting.
3. Mark Insertion Depth: The tool is designed with a shoulder that indicates the precise insertion depth required for SharkBite fittings. Use a permanent marker to draw a line around the pipe at this shoulder. This mark will serve as a visual guide to ensure the pipe is fully inserted into the fitting.
4. הסר צינור: Once deburred and marked, remove the pipe from the tool. The pipe is now ready for connection with a SharkBite fitting.

תמונה 3: תקריב view of the tool, emphasizing its versatile compatibility with various pipe types, durable plastic construction, and effective deburring capability.

Tip for Tight Spaces: The UXLG03 tool's design allows for rotation, which can be beneficial when working in confined areas, making the deburring and marking process easier and faster.

Image 4: The tool positioned to demonstrate its rotatable design, which aids in usability within restricted work environments.

5. תחזוקה

• ניקוי: After each use, wipe the tool clean of any pipe shavings or debris. A dry cloth is usually sufficient.
• אִחסוּן: Store the tool in a dry place, away from direct sunlight and extreme temperatures, to prolong its lifespan.
• בְּדִיקָה: Periodically inspect the internal deburring blades for wear. While designed for durability, excessive wear may reduce effectiveness.

6. פתרון תקלות

• Pipe not deburring effectively:
  • Ensure the correct size opening is being used for the pipe diameter.
  • Rotate the tool firmly and consistently around the pipe.
  • Check for excessive wear on the internal deburring blades.
• Difficulty inserting pipe into the tool:
  • Verify the pipe is cut squarely and free of major deformities.
  • Confirm the correct size opening is selected.
• Marking line is unclear:
  • Use a fine-tipped permanent marker for best results.
  • Ensure the pipe is clean and dry where the mark is applied.

7. מפרטים

8. אחריות ותמיכה

For warranty information, technical support, or further assistance, please refer to the official SharkBite website or contact their customer service directly. Product registration may be available and is recommended.

יַצרָן: Cash Acme

UPC: 697285030527