Ushio BC1618 FCL J120V-500W Projector Light Bulb Instruction Manual

1. המוצר נגמרview

This manual provides essential information for the safe and effective use of your Ushio BC1618 FCL J120V-500W Halogen Projector Light Bulb. Please read these instructions carefully before installation and operation.

תיאור המוצר

The Ushio BC1618 is a 500-watt, 120-volt halogen incandescent light bulb designed for projector, stage, and studio applications. It features a T2.5 shape with a Recessed Single Contact (R7s) base, providing a clear light output with a color temperature of 3,000K.

תכונות מפתח

• מהtage: 500W
• כרך ידtage: 120V
• סוג בסיס: R7s (Recessed Single Contact)
• טמפרטורת צבע: 3,000K
• שטף אור: 10,000 לומן
• משך חיים ממוצע: 2,000 שעות
• סִיוּם: בָּרוּר

Figure 1: Ushio BC1618 FCL J120V-500W Halogen Projector Light Bulb.

2. מידע בטיחות

Always observe the following safety precautions to prevent injury or damage to the product and equipment.

• ניתוק חשמל: Always disconnect power to the fixture before installing, removing, or handling the bulb.
• טמפרטורה גבוהה: Halogen bulbs operate at high temperatures. Allow the bulb to cool completely before touching it.
• הימנע ממגע ישיר: Do not touch the glass part of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature failure. Use a clean cloth or gloves if handling is necessary.
• מתקן מתאים: Use only in fixtures designed for halogen bulbs of the specified wattagה וכרךtage.
• אוורור: יש לוודא אוורור נאות סביב גוף המכשיר כדי למנוע התחממות יתר.
• רְשׁוּת: יש להשליך נורות משומשות בהתאם לתקנות המקומיות.
• הגנת עיניים: Wear appropriate eye protection during installation or removal to guard against potential glass breakage.

3. הוראות התקנה

Follow these steps to safely install the Ushio BC1618 projector light bulb.

1. ודא שהחשמל כבוי: Before beginning, confirm that the power supply to the projector or fixture is completely disconnected.
2. אפשר קירור: If replacing an old bulb, ensure it has cooled down completely to avoid burns.
3. Access Bulb Compartment: Open the bulb access panel on your projector or fixture. Refer to your projector's manual for specific instructions on accessing the bulb.
4. הסר נורה ישנה: Carefully grasp the old bulb (using a cloth or gloves if it's a halogen type) and gently pull it straight out from its R7s base. Avoid twisting.
5. ידית נורה חדשה: Remove the new Ushio BC1618 bulb from its packaging. Do not touch the glass envelope with bare hands. Use the packaging, a clean cloth, or gloves to handle the bulb.
6. הכנס נורה חדשה: Align the pins of the new bulb with the slots in the R7s base. Gently push the bulb straight into the socket until it is firmly seated. Do not force it.
7. תא מאובטח: Close and secure the bulb access panel.
8. החזר כוח: Reconnect the power supply to the projector or fixture.

Figure 2: Approximate dimensions of the Ushio BC1618 bulb, showing its length of 4.8 inches (12 cm).

4. תפעול

Once the Ushio BC1618 bulb is correctly installed, operate your projector or fixture as per its manufacturer's instructions. The bulb will illuminate immediately upon power application.

• זמן חימום: Halogen bulbs provide instant full brightness.
• תירגע: After use, allow the projector or fixture to cool down for several minutes before moving or storing it. This helps prolong the life of the bulb and other components.
• עמעום: If your fixture supports dimming, ensure it is compatible with halogen incandescent bulbs.

5. תחזוקה

Proper maintenance can extend the life of your Ushio BC1618 bulb and ensure optimal performance.

• ניקוי: If the bulb's glass envelope becomes dirty, gently wipe it with a clean, lint-free cloth moistened with isopropyl alcohol. Ensure the bulb is completely cool and power is disconnected before cleaning.
• בְּדִיקָה: Periodically inspect the bulb and its socket for any signs of damage, corrosion, or loose connections.
• אִחסוּן: Store spare bulbs in their original packaging in a cool, dry place to protect them from damage.

6. פתרון תקלות

If you encounter issues with your Ushio BC1618 bulb, refer to the following common problems and solutions.

7. מפרט טכני

8. אחריות ותמיכה

מידע על אחריות

The manufacturer states that a specific warranty description is לא ישים for this product. Please refer to the retailer's return policy for any issues.

תמיכת לקוחות

For further assistance or inquiries regarding the Ushio BC1618 projector light bulb, please contact your point of purchase or refer to the manufacturer's official webאתר למשאבי תמיכה.