Domande e risposte sul manuale dell'utenteRisposta
22 agosto 2025 - 06:55
To program a new master code for the DKS 1503 Basic Stand Alone Digital Keypad Entry Device, follow these steps as outlined in the owner's manual:
1. Open the cabinet and locate the Master Code button on the circuit board.
2. Press the Master Code push button once.
3. Enter a four-digit code on the keypad and then press * (short beep).
4. Close the cabinet.
It is important to remember the new master code you have programmed and keep it in a safe place. If you forget your master code, you will need to program a new one before accessing any programming functions of the digital keypad.
By following these steps, you can easily set a new master code for your DKS 1503 keypad entry device.
Aggiungi nuovo commento