Windows 11 - Legacy Driver Installation

Ethernet Adapter/Port Setup

1. In the search bar at the bottom of the screen, type Settings.
2. Click Open.
3. Click Network and Internet.
4. Click Advanced Network Settings.
5. Select the drop-down arrow next to the laser's Ethernet connection. It will often say "Unidentified network".
6. Next to "More adapter settings," click Edit.
7. Select Internet Protocol Version 4 (TCP/IPv4), then click Properties.
8. In the "IP address" field, enter the IP address for your laser. For example, 192.168.3.3. The last digit will differ from the laser's IP address.
9. Click the Subnet mask field. It will auto-populate with 255.255.255.0.
10. Then click OK.

Installing the Driver

This guide is for Ethernet installation of the Mini/Helix, Zing, EXT, and older Fusion/M2 drivers.

1. Download the driver from https://www.epiloglaser.com/tech-support/drivers/.
2. Open the downloaded file and click Unzip.
3. The "Add a Device" window will open. Click The printer that I want isn't listed.
4. Select Add a local printer or network printer with manual settings.
5. Select Create a new port. From the drop-down menu, select Standard TCP/IP Port. Click Next.
6. Deselect Query the printer. Enter the IP address of the laser (e.g., 192.168.3.4). Then click Next.
7. Select Custom and click Settings.
8. Select LPR protocol. Enter the machine model in Queue Name. Click OK.
9. Click Next.
10. Click Have Disk.
11. Click Browse.
12. Click This PC, Local Disk (C:), then Open.
13. Open the driver file for your machine (e.g., navigate to the unzipped folder).
14. Select the .inf file (e.g., Epilog WinAll.inf) and click Open.
15. Click OK.
16. Click Next.
17. Name the printer or leave the default name and click Next.
18. Click Install.
19. Leave Do not share this printer selected and click Next.
20. Click Finish.

Troubleshooting

Unable to send a job to the machine?

• Verify the IP address of the laser matches what was entered during driver install.
• Make sure the USB is NOT connected.
• Test your Ethernet cable.

Further support is available at https://www.epiloglaser.com/tech-support/technical-support/.