User Manual for PXN models including: V10 Steering Wheel, V10, Steering Wheel, Wheel
PXN V10 steering wheel (PC/PS4/Xbox SX/Xbox One) starting from £ 289.99 (2023) | Price Comparison Skinflint UK
S-V10 3IN1-V2-20220424 112mm*165mm 100g PANTONG 151C
User Manual
ENGLISH /
Thank you for choosing PXN products and your support for our brand, please read this manual carefully before starting to enjoy your gaming experience.
PXN PXN
APPEARANCE /
LED indicator LED
D-pad
Left paddle L1/ L2 L1/ L2
HOME button HOME
A/ B/ X/ Y buttons A/ B/ X/ Y
Right paddle R1/ R2
R1/ R2
Function buttons
53.6 mm
235 mm
96 mm
High and low gear switch
LED indicator LED
Handbrake
220 mm
Gear shift
97 mm
PRODUCT CONTENT /
Steering wheel fixed bracket *2
*2
Steering wheel power adapter *1
Steering wheel power cable *1
Foot pedal cable with Allen screw *4
registered jack *1
Allen key *1
Foot pedal USB cable *1
*1 *1
*1 USB *1
*4 *1
- 1 -
SYSTEM REQUIREMENTS /
Supported platforms : PC / PS4 / X-ONE / X-Series X|S Compatible computer operating systems : Windows 7 / 8 / 10 / 11 Note: Original controller should be used for guidance while playing on PS4 and X-ONE / X-Series X|S platforms.
PC / PS4 / X-ONE / X-Series X|S PC Windows 7 / 8 / 10 / 11 PS4 X-ONE / X-Series X|S
BACK INTERFACE OF THE STEERING WHEEL /
Back Interface Connection Diagram
3 Foot pedals 3
270/900 degree switch 270/ 900
6+1 Gear shift 6+1
Power Cable
Original PS4/ X-BOX/ X-Series X|S controller PS4 X-Series X|S X-ONE
PC
PS4/ X-BOX/ X-Series X|S
- 2 -
STEERING WHEEL INSTALLATION INSTRUCTION /
Assembling of Panel and Base / Step 1 Align the panel with the panel mounting position of the base, hold the steering wheel dial, and tighten the locking ring. Step 1
Steering Wheel Fixed Instruction /
Step 1 Put the steering wheel base in a proper position and install the clamp. Step 2 Use an Allen key to tighten the screws on the clamp to lock the clamp.
Step 1 Step 2
Steering Wheel Tilt Adjustment Instruction /
When in use, you can set the inclination of the steering wheel base with 4 gears. Step 1 Use an Allen key to remove the screws shown in the figure. Step 2 Adjust the inclination of the base to the corresponding hole position and tighten the screws.
4 Step 1 Step 2
- 3 -
FOOT PEDALS INSTALLATION INSTRUCTION /
Panel Angle Adjustment of Foot Pedal /
Step 1 Use an Allen key to loosen and remove the 2 Allen screws. Step 2 Adjust the pedal to the desired angle, install and tighten the 2 Allen screws.
Step 1 2 Step 2 2
* DO Not Over Tighten *
Pedal Strength Adjustment Instruction/
Step 1 Rotate the parts shown in the figure to adjust the pedal strength.
Note: Please adjust the parts within the thread range.
Step 1
Foot Pedal Fixed Instruction / Step 1 There are 4 screw holes reserved at the bottom of the foot pedal to fix the pedal to the bracket by combining the corresponding screws.
Step 1 4
- 4 -
INSTRUCTION FOR PLAYING ON PC / PC
Step 1 Connect the gear shift and foot pedals to the steering wheel. Step 2 Fix the steering wheel and connect it to the power adapter. Step 3 Plug the USB main cable of the steering wheel to the PC. Step 4 The steering wheel will be in D-input mode by default if successfully connected, and the red indicator on the steering wheel will be always on.
Mode Switch While Playing on PC
The steering wheel is in D-input mode by default. Press the " " button for 3 seconds to switch to X-input mode and a purple indicator will be always on if successfully switched.
Mode Switch by " " Button
D - input
Press the " " button for 3 seconds
X - input
D-input mode supports force feedback function (requires the game to support force feedback) Recommended games: Euro Truck Simulator 2, Forza Horizon 5, Assetto Corsa: Racing, Dirt Rally 2.0, F1 2020. No forceback feedback function in X-input mode Recommended games: Forza Horizon 4 (Steam version), Spintires: Snowrunner, Need for Speed: Heat Pursuit.
PC
Step 1 Step 2 Step 3 Step 4
USB PC D-input
PC D-input " " "
D - input
" 3 X-input
"
" 3
X - input
D-input 2 5 2.0F1 2020 X-input 4 Steam
INSTRUCTION FOR PLAYING ON PS4 / PS4
Step 1 Connect the gear shift and foot pedals to the steering wheel. Step 2 Securely install the steering wheel and connect to the power adapter. Step 3 Turn off the PS4 original controller and use the USB data cable to connect the controller to the controller interface of the steering wheel. Step 4 Plug the USB main cable of the steering wheel into the USB port of the PS4 host, and turn on the PS4 host. Step 5 Press the " " button of the steering wheel and the blue indicator of the steering wheel will be always on if connected successfully.
Step 1 Step 2 Step 3 Step 4 Step 5
PS4 USB PS4
USB PS4 USB PS4
"
"
- 5 -
INSTRUCTION FOR PLAYING ON X-ONE/ X-SERIES X S / X-ONE/ X-SERIES X S
Step 1 Connect the gear shift and foot pedal to the steering wheel. Step 2 Fix the steering wheel and connect it to the power adapter. Step 3 Turn off the X-ONE / X-Series X|S original controller and use the USB data cable to connect the controller to the controller interface of the steering wheel. Step 4 Plug the steering wheel USB main cable into the USB port of the X-ONE / X-Series X|S host and power on the X-ONE/ X-Series X|S host. Step 5 Press the " " button of the steering wheel and the green indicator will be always on.
Step 1
Step 2
Step 3 X-ONE / X-Series X|S USB X-ONE / X-Series X|S
Step 4 USB X-ONE / X-Series X|S USB X-ONE / X-Series X|S
Step 5 "
"
STEERING WHEEL ADVANCED SETTINGS /
Download the [PXN Wheel] APP on your mobile phone to get the advanced settings of the steering wheel.
Main Functions of the APP:
Steering effective rotation degree setting Force feedback setting Button mapping setting Game preset button configuration Steering wheel button test
Scan the QR code to download the APP
PXN APP
APP
APP
PRECAUTIONS /
Please read the manual carefully before using. Avoid strong vibration and gravity drop. Do not disassemble, modify or repair by yourself. Prevent water or other liquids from getting into the product to avoid damage. Avoid storing products in some places with humid, high temperature,oily smoke, etc. Please use proper power while connecting and removing devices to avoid damage. Children can only use this product under the supervision of an adult.
- 6 -
PRODUCT SPECIFICATIONS /
Product Model
Connection Method
Working Voltage
Working Current
Package Size
Product Size
PXN - V10 ( 3in1 )
USB Wired
Motor Working Power: DC24 V USB Working Power: 5 V
Motor Working Current: 2A USB Working Current: 500mA ( while using the original controller for guidance )
About 435 * 355 * 370 mm
About 270 * 280 * 249 mm ( Steering wheel )
About 410 * 340 * 220 mm ( 3 Foot pedals )
About 180 * 105 * 200 mm ( Gear shift )
Product Weight
About 2940 g ( Steering wheel ) About 3180 g ( 3 Foot pedals ) About 577g ( Gear shift )
Operating Temperature
10-40
Operating Humidity
20j80 %
PXN - V10 3in1
USB
DC24 V USB5 V 2A USB 500mA
435 * 355 * 370 mm
270 * 280 * 249 mm 410 * 340 * 220 mm 3 180 * 105 * 200 mm
2940 3180 3 577 10-40
2080 %
- 7 -
Adobe PDF library 15.00 Adobe Illustrator(R) 24.0