VIVOSUN AeroLush C08 User Manual

Safety Information

Read carefully! Safety is cool.

Please read these instructions carefully before using the device. Failure to follow these safety guidelines may result in injury, void the product warranty, and release Vivosun from all liability.

1. Do not operate the device with wet hands, submerge it in water, or place it near water or oil.
2. Do not pierce or burn the device.
3. Keep all ventilation openings clear of obstructions.
4. Do not use this product outdoors, in direct sunlight, or expose it to weather or the elements.
5. Follow local grid interconnection rules when installing the air conditioner and ensure proper grounding. If you have any questions about electrical installation, follow the manufacturer's instructions or consult a professional electrician.
6. Never insert fingers or objects into the air outlet. Warn children about these dangers.
7. If the device emits a burning smell or shows signs of malfunction, immediately cut off the power supply and stop using it.
8. Do not disassemble, modify, repair, or clean internal components without authorization.
9. Keep hands away from the air outlet and internal components.
10. Do not place heavy objects on the air outlet or sit directly on it.
11. Do not replace the power cord without authorization, splice it, or use it in parallel with other high-power electrical devices.
12. Do not cover the product or power cords with rugs or other fabric materials.
13. Place the device on a flat, dry surface, maintaining at least 50 cm of clearance from surrounding objects or walls.
14. Do not place the product on a soft, elevated, or unstable surface where it may fall or have its air intakes or exhaust blocked.
15. Do not clean the air conditioner with chemical solvents such as gasoline or alcohol. Before cleaning, disconnect the power supply and use a slightly damp soft cloth. For heavy dirt, use a mild detergent.
16. This device may be used by children aged 8 and above, as well as individuals with reduced physical, sensory, or mental capabilities, or those lacking experience and knowledge, provided they have received proper supervision or instruction on its safe use and understand the associated hazards. Children must not play with the device.

Risk of fire or explosion - this device contains a flammable refrigerant. Follow all additional safety precautions to prevent hazards.

1. Do not use any methods to accelerate the defrosting process or for cleaning other than those recommended by the manufacturer.
2. The device must be stored in a room without continuously operating ignition sources, such as open flames, gas appliances, or electric heaters.
3. Do not pierce or burn refrigerant tubing. Be aware that refrigerants may be odorless. Keep ventilation openings clear of obstruction.
4. Do not drill holes in the unit.
5. Maintenance, cleaning, and servicing should only be performed by technicians who are properly trained and qualified in handling flammable refrigerants.
6. Dispose of the air conditioner in accordance with federal and local regulations. Flammable refrigerants require special disposal procedures.

Key Features

Product Contents

The AeroLush C08 package includes:

• Evaporator Air Inlet Hood
• Evaporator Air Outlet Hood
• Temperature and Humidity Probe
• Exhaust Duct 2m (with adapter) x2
• Exhaust Duct 2m
• Filter
• Condenser Outlet Adapter
• Window Duct Adapter
• Window Sealing Plate Assembly (Long)
• Window Sealing Plate Assembly (Short)
• Drain Pipe

Illustration showing all included accessories for the AeroLush C08.

Dimensions

Installation

Follow these steps to install the AeroLush C08:

Installation of Accessories

1. STEP 1.1 Insert the evaporator air outlet hood into the air conditioner's evaporator air outlet, ensuring the correct top and bottom orientation of the hood.
2. STEP 1.2 Insert the condenser connector horizontally into the condenser air outlet.

2. STEP 2.1 Take one piece of exhaust duct (2m with adapter) and connect it to the evaporator air outlet hood, then tighten it counterclockwise.
3. STEP 2.2 Take the other piece of exhaust duct (2m with adapter) and connect it to the evaporator air inlet hood, then tighten it counterclockwise.
4. STEP 2.3 Take one exhaust duct, pull out a portion from the duct's end, and then screw it clockwise into the condenser outlet adapter.
5. STEP 3 Ensure that the adapter, hoods, and ducts are securely installed and properly fitted in place.

Installation of Probe

1. STEP 1 Insert the temperature and humidity probe into the 2.5mm jack on the right side of the evaporator air inlet hood, ensuring it is securely in place. Note: If the probe is not connected, the screen will display "-".
2. STEP 2 Place the probe in the target area and secure it. Note: It is recommended to position the sensor at a height of 2 to 4 inches above the canopy.

Configuration of Duct Configuration

A. Cool Mode & Dry Mode

Illustration showing duct configuration for Cool and Dry modes.

B. Heat Mode

Note: When using heat mode, it is essential to switch the duct connection.

Illustration showing duct configuration for Heat mode.

C. Fan Mode

In Fan Mode, there are no specific connection requirements. You may refer to other modes or install the duct as needed based on your setup.

Note:

1. Ensure the exhaust duct does not have bends greater than 45°, as this can affect the air conditioner's performance.
2. The exhaust duct inside the tent should be positioned upwards, avoiding direct airflow onto the leaves.

Illustration showing correct and incorrect duct positioning for Fan Mode.

Installation of Drainage Pipe

1. Step 1 Unscrew the nut on the drainage hole counterclockwise, then remove the soft plug inside.
2. Step 2 Remove the drainage connector from the water pipe and insert it into the nut, then screw the nut back onto the drainage hole clockwise.
3. Step 3 Attach the drainage pipe to the drainage connector and place the other end in the sewer or drainage tray.

Note:

1. The drainage pipe must be connected in Dry Mode; for other modes, it is optional.
2. If the screen displays a "water full" icon, unscrew the spare drainage hole to drain the water.

Installation of Window

1. Step 1 Install the Window Duct Adapter clockwise onto the other end of the condenser exhaust pipe.
2. Step 2.1 Partially open the window and mount the window sealing plate assembly onto the window. The components can be placed either horizontally or vertically.
3. Step 2.2 Extend the various components of the window sealing plate assembly, adjusting their distance to ensure both ends of the assembly make contact with the window frame. Then, secure all components in place.

Note:

1. Select the appropriate window sealing plate (long or short) based on your window size.
2. The flat end of the exhaust pipe joints must be securely snapped into place.
3. The pipe should not be distorted or have substantial bends (greater than 45°). Ensure that the exhaust pipe remains unobstructed for proper ventilation.

Control Panel

The control panel allows you to manage the AeroLush C08's functions.

On/Off Button

Press to turn on. Press and hold for 3s to turn off.

Mode Button

Press to switch function modes: Cool, Heat, Dry, Fan. Press and hold to exit Recipe Mode (Effective only when recipe is running).

Fan Speed Button

Press to switch fan modes: standard mode and quiet mode.

Up Button

Press to increase value of current setting. Press and hold to switch between °C and °F.

Down Button

Press to decrease value of current setting.

Confirm Button

Press to confirm current operation. Press and hold to enter the settings menu, including calibration, and mute toggle.

Other Button Operations

1. Press and hold the On/Off and Up buttons to lock or unlock the device.
2. Press and hold the On/Off and Confirm buttons to reset the device to factory settings.

Control Panel Display Icons:

• 1. Function Mode: Cool, Heat, Dry, Fan.
• 2. Status Icon: Indicates device status, including cloud lock, tilt, water full, probe detection, connection status, and mute.
• 3. Probe Readings: Displays current probe readings, including temperature, relative humidity, and VPD.
• 4. Fan Speed: Standard Mode and Quiet Mode.
• 5. Error Icon: Displays an error code when the device encounters an issue.
• 6. Screen lock Icon: Illuminates when screen operation is locked.
• 7. Calibration Mode: Icon appears when performing temperature and humidity calibration.
• 8. Setting Mode: Icon appears when adjusting temperature and humidity settings.

Operation

Press the Mode Button to enter mode selection, then press it again to cycle through available modes. Select Cool Mode and press the Confirm Button to confirm. Use the Up/Down Button to set the target temperature, then press the Confirm Button again to start the device.

Note:

1. After switching modes, ensure that the duct installation is correct.
2. In Fan Mode, temperature and humidity settings are not required.
3. The air conditioner uses a smart buffer to stay within ±1.8°F of your set temperature and ±5% of your target humidity.

Wi-Fi Configuration

Step 1 Download the Vivosun app

Search "VIVOSUN" in the Apple App Store or in the Google Play Store to download the Vivosun app.

Step 2 Add AeroLush

Tap "+" to add AeroLush, then follow the prompts in the app to complete the Wi-Fi configuration.

Step 3 Name Device

After a successful connection, you can rename your device.

Screenshots of the Vivosun app showing the process of adding and naming the AeroLush device.

Maintenance

Before performing maintenance, make sure to turn off the power and unplug the device.

Surface Clean

Wipe the surface with a soft cloth. Do not use aggressive chemicals or detergents to clean the surface, as they may cause damage.

Filter Clean

Take the filter out of the air conditioner. Gently soak the filter in a mild detergent, rinse it thoroughly, and allow it to dry. Dirty filters reduce airflow, so they should be cleaned every two weeks.

Troubleshooting

Complete Your Setup

VIVOSUN offers a range of products to complement your AeroLush C08 setup:

For more information about our products or personalized recommendations for a growing system suited to your needs, feel free to contact VIVOSUN.

Warranty

Vivosun provides a one-year warranty against defects on the AeroLush Air Conditioner purchased directly from Vivosun or through its authorized dealers. This warranty reflects Vivosun's commitment to addressing any manufacturing defects or premature breakage that may occur during normal use of its products.

Vivosun's warranty covers the replacement or refund of purchases that exhibit material defects within one year of the original purchase date. To initiate a claim, customers must contact Vivosun and provide proof of purchase to verify eligibility.

This policy does not cover products that have been misused, abused, or intentionally damaged. It also excludes normal wear and tear or cosmetic defects, such as minor scratches.

Customers can feel confident knowing Vivosun's products undergo rigorous quality testing. This one-year warranty demonstrates Vivosun's belief in the durability of its products under normal use.

100% BEST QUALITY

If any product defects are found, customers are encouraged to contact Vivosun immediately. Your satisfaction is Vivosun's priority, and Vivosun is committed to resolving any issues in a professional and timely manner.