Langsdom AirSwim Neo Bone Conduction Headphones User Manual

1. Introduzione

The Langsdom AirSwim Neo bone conduction headphones are engineered for versatile use, offering high-performance audio in diverse environments. Featuring IP68 waterproofing, a comfortable skin-friendly silicone design, and dual Bluetooth V6.0 and MP3 modes, these headphones are suitable for activities such as swimming, running, and general daily use. This manual provides essential information for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

2. Cosa c'è nella scatola

• Langsdom AirSwim Neo Bone Conduction Headphones
• Cavo di ricarica/dati magnetico
• Manuale dell'utente (questo documento)

3. Prodotto finitoview

Familiarize yourself with the key features and design elements of your AirSwim Neo headphones.

Figura 3.1: Headphones in use by a swimmer, demonstrating the built-in 32GB memory for MP3 playback, essential for underwater listening.

Figura 3.2: Ergonomic design for comfortable and secure fit during extended wear, featuring skin-friendly silicone and a bio-curved shape.

Figura 3.3: The headphones are designed for both water and land activities, offering IP68 waterproof protection for swimming and durability for various sports.

Figura 3.4: Interno view illustrating the advanced Bluetooth 6.0 technology for strong signal, fast connection, and low power consumption.

Figura 3.5: Battery performance details, indicating up to 8 hours of playtime in Bluetooth mode and 4 hours in MP3 mode.

Figura 3.6: The AI single mic ENC algorithm ensures clear call quality by reducing environmental noise.

4. Impostazione

4.1 Carica iniziale

Before first use, fully charge the headphones. Connect the magnetic charging cable to the charging port on the headphones and the other end to a USB power source (e.g., computer USB port or USB wall adapter). A full charge takes approximately 1.5 hours. The indicator light will change to show charging status (e.g., red for charging, blue for fully charged).

4.2 Accensione/spegnimento

• Accensione: Press and hold the Power/Multi-function button for 3 seconds until the indicator light flashes and you hear a power-on prompt.
• Spegni: Press and hold the Power/Multi-function button for 5 seconds until the indicator light turns off and you hear a power-off prompt.

4.3 Associazione Bluetooth

1. Assicurati che le cuffie siano spente.
2. Tenere premuto il pulsante di accensione/multifunzione per 5-7 secondi finché la spia luminosa non lampeggia alternativamente in rosso e blu, indicando la modalità di associazione.
3. Sul tuo dispositivo (smartphone, tablet, computer), attiva il Bluetooth e cerca i dispositivi disponibili.
4. Select "AirSwim Neo" from the list of found devices.
5. Once paired, the indicator light will flash blue slowly, and you will hear a connection confirmation.

Una volta accese, le cuffie tenteranno automaticamente di riconnettersi all'ultimo dispositivo associato.

4.4 MP3 Mode (Music Transfer)

The AirSwim Neo features a built-in 32GB memory for offline music playback, ideal for swimming or when a Bluetooth connection is not desired.

1. Connect the magnetic charging/data cable to the headphones.
2. Connect the USB end of the cable to your computer. The headphones will be recognized as a removable disk.
3. Trascina e rilascia la musica desiderata files (MP3, WMA, WAV, APE, FLAC formats are supported) into the headphone's storage folder.
4. Prima di scollegare il cavo, espellere in modo sicuro il disco rimovibile dal computer.

Alternatively, an OTG adapter can be used to connect the headphones to compatible mobile devices for music transfer.

5. Istruzioni per l'uso

5.1 Passaggio tra le modalità Bluetooth e MP3

Press the Mode button (often combined with the Power/Multi-function button or a dedicated button) to switch between Bluetooth and MP3 playback modes. A voice prompt will confirm the current mode.

5.2 Controlli di riproduzione musicale

• Riproduci/Pausa: Premere brevemente il pulsante multifunzione.
• Aumenta volume: Premere brevemente il pulsante Volume +.
• Volume basso: Premere brevemente il pulsante Volume -.
• Traccia successiva: Premere a lungo il pulsante Volume +.
• Traccia precedente: Premere a lungo il pulsante Volume -.

5.3 Gestione delle chiamate

• Rispondi/Termina chiamata: Short press the Multi-function button during an incoming call or to end an active call.
• Rifiuta chiamata: Premere a lungo il pulsante Multifunzione durante una chiamata in arrivo.
• Ricomponi l'ultimo numero: Premere due volte il pulsante Multifunzione quando non si è impegnati in una chiamata.

5.4 Assistente vocale

Triple-press the Multi-function button to activate your device's voice assistant (e.g., Siri, Google Assistant).

5.5 Waterproof Usage (Swimming)

For swimming and other water-based activities, it is recommended to use the MP3 mode. Bluetooth signals do not transmit effectively through water. Ensure the charging port is clean and dry before and after water exposure. The IP68 rating allows submersion up to 2 meters.

6. Manutenzione

6.1 Pulizia

• Pulisci le cuffie con un panno morbido, damp panno dopo ogni utilizzo, soprattutto dopo l'allenamento o il nuoto.
• Do not use abrasive cleaners, alcohol, or chemical solvents, as these can damage the silicone material and waterproof seals.
• Ensure the charging port is free of debris and dry before charging.

6.2 Conservazione

Store the headphones in a cool, dry place away from direct sunlight and extreme temperatures. Avoid placing heavy objects on the headphones to prevent damage to the frame.

6.3 Cura impermeabile

After using the headphones in chlorinated or saltwater, rinse them thoroughly with fresh water and allow them to air dry completely before charging or storing. This helps prevent corrosion and maintains the integrity of the waterproof seals.

7. Risoluzione Dei Problemi

• Nessun potere: Ensure the headphones are fully charged. If the issue persists, try a different charging cable or USB port.
• Nessun suono: Check the volume level on both the headphones and your connected device. Ensure the headphones are correctly paired in Bluetooth mode or that music files are properly loaded in MP3 mode.
• Impossibile associare il Bluetooth: Ensure the headphones are in pairing mode (red and blue flashing light). Turn off and on your device's Bluetooth, then try pairing again. Clear previous pairings on your device if necessary.
• Music Transfer Issues: Verify the magnetic charging/data cable is securely connected. Ensure music files are in supported formats (MP3, WMA, WAV, APE, FLAC). Try connecting to a different USB port on your computer.
• Scarsa qualità della chiamata: Ensure the microphone is not obstructed. Check for strong Bluetooth connection. The AI Call Noise Reduction feature works best in moderately noisy environments.

Se i problemi persistono, fare riferimento alla sezione di supporto per ulteriore assistenza.

8. Specifiche

9. Informazioni sulla garanzia

The Langsdom AirSwim Neo headphones come with a Garanzia limitata di 1 anno dalla data di acquisto. La presente garanzia copre difetti di fabbricazione e di lavorazione in condizioni di normale utilizzo. Non copre danni causati da uso improprio, incidenti, modifiche non autorizzate o normale usura. Si prega di conservare la prova d'acquisto per eventuali reclami in garanzia.

10. Supporto

For further assistance, technical support, or warranty inquiries, please contact Langsdom customer service through the retailer where you purchased the product or visit the official Langsdom websito per le informazioni di contatto.

Risorse online:

• Langsdom Official Websito: Visit the Langsdom Store on Amazon