SOUNDPEATS C30 Hybrid ANC Wireless Earphones User Manual

1. Prodotto finitoview

The SOUNDPEATS C30 Hybrid ANC Wireless Earphones offer an immersive audio experience with advanced noise cancellation and high-resolution sound. This manual provides essential information for optimal use.

Immagine: Oltreview of SOUNDPEATS C30 earphones showcasing key features like Hybrid ANC, 12mm driver, 6 mics, Bluetooth 6.0, 52-hour playback, IP54, and app support.

2. Contenuto della confezione

Si prega di verificare che tutti gli articoli siano presenti nel pacco:

• SOUNDPEATS C30 Bluetooth Earphones (main unit)
• Custodia di ricarica
• Eartips (S, M, L sizes; M size pre-installed)
• Cavo di ricarica di tipo C.
• Manuale d'uso

3. Impostazione

3.1 Uso iniziale

1. Remove the insulating film from the earphone contacts.
2. Place the earphones back into the charging case. They will automatically power on.
3. To power off, close the charging case lid. The earphones will automatically power off.

3.2 Abbinamento

1. Aprire il coperchio della custodia di ricarica. Gli auricolari entreranno automaticamente in modalità di associazione.
2. On your device, open Bluetooth settings and select "SOUNDPEATS C30" to connect.

3.3 PeatsAudio App Installation & Connection

The dedicated "PeatsAudio" app enhances your experience with customizable settings.

1. Download and install the "PeatsAudio" app from your device's app store.
2. Open the app and log in with your registered email address and password. (If not registered, tap "Register" to create a new account.)
3. After logging in, tap "Connect Device" on the home screen.
4. Select your paired SOUNDPEATS C30 from the list to connect.

Image: The PeatsAudio app interface, illustrating options for equalizer adjustment, finding earphones, multipoint connection, volume adjustment, normal mode, transparency mode, ANC mode, game mode, battery display, and reset.

4. Istruzioni per l'uso

4.1 Indossare gli auricolari

1. Identificare gli auricolari sinistro (L) e destro (R).
2. Insert them correctly into your ears.
3. Adjust the angle and position for the most comfortable and secure fit.

4.2 Comandi touch

The earphones feature smart touch controls:

• Left Earphone (1 tap): Abbassa il volume
• Right Earphone (1 tap): Alza il volume
• Either Earphone (2 taps): Riproduci/Pausa, Rispondi/Termina chiamata
• Left Earphone (1.5s long press): Switch between Normal / ANC / Transparency modes
• Right Earphone (1.5s long press): Passa alla traccia successiva
• Left Earphone (3 taps): Modalità gioco attivata/disattivata
• Right Earphone (3 taps): Attiva l'Assistente Vocale
• Incoming Call (1.5s long press): Rifiuta chiamata

4.3 App Features (PeatsAudio)

The PeatsAudio app provides extensive customization and control:

• Disable Touch Controls: Temporarily disable touch operations.
• Modalità di gioco: Experience low-latency audio for gaming.
• Modalità film: Enjoy 360° spatial audio.
• Connessione multipunto: Connect to two devices simultaneously (e.g., smartphone and PC). Note: LDAC is not available when multipoint is active.
• Personalizza i controlli touch: Personalize touch functions to your preference.
• Preimpostazioni audio: Choose from 12 types of audio presets.
• EQ personalizzato: Finely adjust your own equalizer settings.
• Earphone Water Drainage: If water enters the earphones, activate vibration drainage. Remove earphones from case and press the start button. Shaking them will improve drainage.
• Voice Guidance Volume: Adjust the volume of various voice prompts.
• Trova auricolari: Tap "L/R Search" while connected to make the earphones emit a sound, helping you locate them.
• Prova di adattamento: Determines if the earphones are worn correctly. Adjust position or change eartips if the fit is insufficient.
• Attivazione LDAC: Enable LDAC for higher quality audio transmission. This allows for richer sound details. Note: LDAC is off by default. LDAC requires a compatible device; iPhones are not supported.

5. Ricarica

5.1 Ricarica della custodia

1. Connect the charging case to a Type-C charging adapter using the provided cable. (Charging current should be 1A or less).
2. If not used for a long period, charge the case at least once every 3 months.

5.2 Indicatori della batteria

The status light on the charging case indicates the battery level:

• Case Open (Earphone Insertion/Removal):
  • Green Light: 100% ~ 70%
  • Yellow Light: 69% ~ 20%
  • Red Light: Below 20%
• Durante la ricarica:
  • Green Steady Light: 100%
  • Green Breathing Light: 99% ~ 70%
  • Yellow Breathing Light: 69% ~ 20%
  • Red Breathing Light: Below 20%

6. Manutenzione

To ensure optimal performance and longevity of your earphones:

• Regularly clean the earphone body and charging contacts with alcohol and a cotton swab.
• Attenzione: Failure to perform regular maintenance may lead to charging issues or the earphones not powering on.

7. Risoluzione Dei Problemi

7.1 Factory Reset (Reset to Factory Settings)

If you encounter connection issues or other problems, try performing a factory reset:

1. Place both left and right earphones correctly into the charging case.
2. With the case lid open, long-press both earphones simultaneously for 10 seconds.
3. The charging case light will flash red and white twice, indicating the reset is complete.
4. After resetting, the earphones will automatically enter pairing mode (the white LED on the case will flash continuously).

7.2 Forced Pairing Mode

If you need to manually force pairing mode:

1. Operation inside the case: Place both left and right earphones correctly into the charging case. With the case lid open, long-press both earphones simultaneously for 6 seconds. The white LED on the case will flash continuously, and the earphones will enter pairing mode.
2. Operation outside the case: Long-press both left and right earphones simultaneously for 6 seconds. The connection will be forcibly disconnected. A voice guide will announce "Disconnected → Pairing," and the earphones will automatically enter pairing mode.

7.3 Multipoint Connection Issues

If you are experiencing issues with multipoint connection:

1. Assicurarsi che gli auricolari siano in modalità di associazione.
2. Connect device A to the earphones.
3. Disconnect device A from the earphones (turn off Bluetooth on device A). The earphones will re-enter pairing mode.
4. Connect device B to the earphones.
5. Manually reconnect device A to the earphones.
6. Importante: When using multipoint connection, please turn off LDAC in the app.

8. Specifiche

9. Garanzia e supporto

SOUNDPEATS is committed to providing high-quality products and customer support.

• This product comes with a 1-year manufacturer's quality warranty.
• It complies with Japanese Radio Law and Telecommunications Business Law, and has obtained the Ministry of Internal Affairs and Communications' Technical Conformity Certification (Giteki Mark). Certification Number: 220-JP9986.
• If you have any questions or encounter issues during use, please feel free to contact us for prompt and sincere support.