NEEWER Z3-N 100Ws 2.4G TTL Round Head Flash Speedlite Instruction Manual

1. Introduzione

The NEEWER Z3-N is a professional 100Ws 2.4G TTL Round Head Flash Speedlite designed for Nikon cameras. It features 1/8000s High-Speed Sync (HSS), a touch screen interface, and dual modeling lamps. This manual provides detailed instructions for its setup, operation, and maintenance to ensure optimal performance.

2. Cosa c'è nella scatola

• 1 x NEEWER Z3-N Flash Speedlite
• 1 batteria al litio
• 1 cavo USB
• 1 x Custodia protettiva
• 1 x Dome Diffuser
• 1 x Mini supporto
• 1 x Manuale utente

3. Impostazione

3.1. Installazione della batteria

1. Individuare il vano batteria sul lato dell'unità flash.
2. Press the release button and slide out the battery cover.
3. Inserire la batteria al litio da 3000 mAh fornita, assicurandosi della corretta polarità.
4. Chiudere il coperchio della batteria finché non scatta saldamente in posizione.

3.2. Montaggio sulla telecamera

1. Slide the flash unit onto your Nikon camera's hot shoe mount.
2. Rotate the locking ring clockwise until the flash is securely fastened to the hot shoe.

4. Istruzioni per l'uso

4.1. Accensione/spegnimento

Press and hold the power button (usually located on the side or rear panel) to turn the flash on or off. The touch screen will illuminate upon activation.

4.2. Modalità flash

The Z3-N supports multiple flash modes for various photographic needs:

• Modalità TTL: Through-The-Lens automatic flash, which measures the light through the camera lens to determine the correct flash output.
• Modalità M (Manuale): Allows manual control over flash output from 1/256 to 1/1 power with 0.1EV precision.
• RPT (Stroboscopic) Mode: Emette una serie di rapidi lampi durante una singola esposizione, ideale per catturare più movimenti di un soggetto.

4.3. Sincronizzazione ad alta velocità (HSS)

The Z3-N supports 1/8000s HSS, allowing you to use flash at shutter speeds faster than your camera's native sync speed. This is useful for freezing fast action or overpowering ambient light outdoors.

4.4. Front/Rear Curtain Sync

Supports both front and rear curtain sync. Front curtain sync fires the flash at the beginning of the exposure, while rear curtain sync fires it at the end, creating different motion blur effects.

4.5. Modellazione Lamps

Equipped with two 3300K LED modeling lamps offering 10 brightness levels. These lamps provide a continuous light source to preview effetti di luce prima di scattare una foto.

4.6. Interfaccia touch screen

The Z3-N features a large, high-definition color touch screen for intuitive control. Adjust power, mode, and modeling light settings directly on the screen. A dedicated TTL/M toggle switch is also available for quick mode changes.

4.7. Flexible Flash Head

The flash head can rotate horizontally from 0-330° and tilt from -7° to 120°, allowing for bounce flash and flexible lighting angles.

5. Batteria e ricarica

The Z3-N is powered by a 3000mAh lithium battery, providing up to 500 full-power flashes and a rapid recycle time of 1.7 seconds. The battery can be charged directly via the USB Type-C port on the flash unit or using an external charging dock (not included) for a full charge in approximately 2.5 hours.

6. Sistema wireless

The flash features a built-in 2.4G Wireless Q System, offering 4 control groups, 32 channels, and 99 IDs. It can function as both a master and slave unit for other Q flashes. It is also compatible with the Godox 2.4GX system (RX COMPAT) and can work as a slave unit with Xpro, X3, and X2 transmitters. Note that the Q system and X system cannot be used simultaneously, and a firmware update may be required for full compatibility.

7. Compatibilità

The NEEWER Z3-N is compatible with Nikon DSLR cameras, including models such as Z9, Z8, ZFC, Z50, Z5, Z6, Z7, Z6II, Z7II, D4, D5, D6, D60, D70S, D90, D100, D200, D300, D300S, D500, D610, D700, D750, D780, D800, D850, D3100, D3200, D3300, D3400, D3500, D5000, D5100, D5200, D5300, D5600, D7100, D7200, and D7500. Note: Not compatible with D810.

8. Manutenzione

• Keep the flash unit clean and free from dust and moisture.
• Use a soft, dry cloth to clean the exterior. For the flash tube, use a lint-free cloth.
• Evitare di far cadere l'unità o di sottoporla a forti urti.
• Store the flash in its protective case when not in use.
• Rimuovere la batteria se il flash non verrà utilizzato per un periodo prolungato.

9. Risoluzione Dei Problemi

• Il flash non si attiva: Ensure the battery is charged and correctly inserted. Check if the flash is securely mounted on the camera's hot shoe. Verify flash mode settings.
• Potenza flash incoerente: Check battery level. Ensure the flash head is properly positioned. In wireless mode, confirm channel and group settings.
• Sovraesposizione/Sottoesposizione: Adjust flash exposure compensation (FEC) or manual power settings. Check camera's ISO, aperture, and shutter speed settings.
• Problemi di connessione wireless: Ensure both master and slave units are on the same channel and group. Check for obstructions between units.

10. Specifiche

11. Garanzia e supporto

Per informazioni sulla garanzia e supporto tecnico, fare riferimento al sito ufficiale NEEWER webo contattare direttamente il servizio clienti. Conservare la ricevuta d'acquisto come prova d'acquisto per eventuali reclami in garanzia.