Introduzione
This manual provides detailed instructions for the setup, operation, and maintenance of your VENTION Wireless HDMI Transmitter and Receiver kit (Model ADP). This device allows for wireless transmission of HDMI signals, supporting up to 4K decoding and 1080p@60fps output, with a transmission range of up to 656 feet (200 meters) in optimal conditions. Please read this manual thoroughly before use to ensure proper functionality and safety.
Contenuto della confezione
Si prega di verificare che tutti gli articoli elencati di seguito siano inclusi nel pacchetto:
- Wireless HDMI Transmitter (1 unit)
- Wireless HDMI Receiver (1 unit)
- Adattatore da USB-C a HDMI
- Mini HDMI Adapter
- Adattatore micro HDMI
- USB-C Power Cord (2 units)
- HDMI Extension Cable (0.2m)
- Manuale d'uso
Image: All components included in the VENTION Wireless HDMI kit.
Prodotto finitoview
Trasmettitore (TX) e Ricevitore (RX)
The VENTION Wireless HDMI system consists of two main units: a Transmitter (TX) and a Receiver (RX). Both units are compact and designed for easy integration into your existing setup. The Transmitter connects to your source device (e.g., laptop, PC, TV box), while the Receiver connects to your display device (e.g., TV, monitor, projector).
Indicatori LED
Both the Transmitter and Receiver feature an LED display that provides real-time status information. This helps in monitoring the connection and identifying potential issues quickly.
- Stato della connessione: Indica se le unità TX e RX sono state accoppiate correttamente.
- Potenza del segnale: Shows the strength of the wireless signal.
- Indicatore HDMI: Confirms HDMI input/output is active.
- Spia di guasto: Illuminates if an error or insufficient power is detected (Red light indicates insufficient power; please use a 5V/2A power adapter).
Immagine: dettagliata view of the LED status display on the VENTION Wireless HDMI unit.
Istruzioni di installazione
Initial Connection (Plug & Play)
The VENTION Wireless HDMI kit is designed for plug-and-play operation. Follow these steps for a quick setup:
- Alimentare le unità: Connect the provided USB-C power cords to both the Transmitter (TX) and Receiver (RX) units. Plug the other end of the USB-C power cords into a 5V/2A USB power source (e.g., a wall adapter or a USB port on your device/display). Ensure the power indicator lights up on both units.
- Collegare il ricevitore (RX): Plug the Receiver (RX) into an available HDMI input port on your monitor, TV, or projector.
- Collegare il trasmettitore (TX): Plug the Transmitter (TX) into the HDMI output port of your source device (e.g., laptop, PC, TV box, gaming console). Use the appropriate adapter (Mini HDMI, Micro HDMI, or USB-C to HDMI) if your source device requires it.
- Associazione automatica: Wait approximately 5 seconds. The Transmitter and Receiver will automatically pair. The connection indicator on both units will light up when the connection is complete.
Image: Step-by-step connection guide for the VENTION Wireless HDMI kit.
Re-pairing Devices (If Connection Fails)
If the devices do not connect automatically or lose connection, you can manually re-pair them:
- Modalità di associazione del ricevitore: With the Receiver (RX) powered on and connected to your display, press and hold its function key for more than 5 seconds. The display will show a prompt indicating "Pairing Timeout: 80S" or similar, signifying it's in pairing mode.
- Abbinamento del trasmettitore: With the Transmitter (TX) powered on and connected to your source device, press and hold its function key for more than 5 seconds. The device connection will be confirmed automatically.
Image: Instructions for manually re-pairing the Transmitter and Receiver units.
Istruzioni per l'uso
Mirror and Extend Modes
The VENTION Wireless HDMI system supports both Mirror and Extend display modes, allowing you to duplicate your source screen or extend your desktop onto the connected display. Ensure your computer supports extended mode for this functionality.
Image: Visual representation of Extend and Mirror display modes.
Multi-Display Expansion
While your current kit includes one Transmitter and one Receiver, the VENTION Wireless HDMI system is capable of supporting up to four Receivers (RX) with a single Transmitter (TX) for multi-display expansion. This allows for seamless syncing of video, audio, and presentations across multiple screens without additional setup.
Image: Multi-display expansion with one Transmitter and up to four Receivers.
Video ufficiale del prodotto
Video: Prodotto ufficiale finitoview of the VENTION Wireless HDMI Transmitter and Receivers, demonstrating its features and capabilities.
Compatibilità
The VENTION Wireless HDMI Kit offers broad compatibility with a wide range of devices. It is designed to seamlessly connect with most HDMI-enabled equipment.
Transmitter (TX) Compatible Devices
- Computer portatili
- PC desktop
- TV Box
- Console di gioco
- Telecamere
- Telecamere di sicurezza
- Smartphones/Tablets (requires support for video protocols)
Receiver (RX) Compatible Devices
- Smart TV
- Monitorare
- Proiettori
Immagine: Oltreview of compatible devices for both the Transmitter and Receiver.
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Dimensioni del prodotto | 3.74 x 1.18 x 0.63 pollici |
| Peso dell'articolo | 6.3 once |
| Numero di modello | ADP |
| Marca | VENZIONE |
| Tecnologia di connettività | Cavo HDMI |
| Tipo di controllore | Premere il pulsante |
| Caratteristica speciale | Schermo LED |
| Dispositivi compatibili | Laptop, Smart TV, PC, Projector, TV Box, Camera, Security Camera, Smartphones/Tablets (with video protocol support) |
| Tipo di connettore | Cavo HDMI |
| Modalità di uscita audio | Stereo, Surround |
| Configurazione del canale audio surround | 7.1 |
| Codifica video | H.264, H.265/HEVC |
| Distanza di trasmissione | Up to 656ft (200m) in open areas; 80-100m indoors without walls; 10-30m with one wall barrier. |
| Risoluzione di uscita | 1080p@60fps (4K decoding supported) |
| Supporto multi-ricevitore | Up to 4 Receivers with one Transmitter (up to 6 devices with "TuTuPlay" app) |
Manutenzione
To ensure the longevity and optimal performance of your VENTION Wireless HDMI kit, please follow these maintenance guidelines:
- Pulizia: Utilizzare un panno morbido e asciutto per pulire le unità. Evitare l'uso di detergenti liquidi o spray, poiché potrebbero danneggiare il dispositivo.
- Magazzinaggio: Quando non vengono utilizzati per lunghi periodi, conservare i dispositivi in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.
- Gestione del calore: The units feature an advanced thermal design. Ensure proper ventilation around the devices to prevent overheating, especially during prolonged operation. Do not block the heat vents.
- Cura del cavo: Handle HDMI and USB-C cables gently. Avoid bending them sharply or placing heavy objects on them to prevent damage.
Risoluzione dei problemi
If you encounter issues with your VENTION Wireless HDMI kit, please refer to the following common solutions:
No Signal or Disconnection
- Controlla la potenza: Ensure both the Transmitter (TX) and Receiver (RX) are properly powered with a 5V/2A USB power source. The power indicator should be lit.
- Verifica connessioni: Confirm that the HDMI cables are securely connected to both the source device and the display, and that the TX and RX units are firmly plugged into their respective HDMI ports.
- Ripara i dispositivi: If the connection indicator is not lit, follow the "Re-pairing Devices" steps in the Setup section.
- Ridurre gli ostacoli: Wireless transmission can be affected by solid walls and other obstacles. Try to minimize physical barriers between the TX and RX units.
- Distanza: Ensure the devices are within the effective transmission range (up to 656ft/200m in open areas, less with obstacles).
- Source/Display Settings: Check your source device's display settings to ensure it's outputting to the correct HDMI port and your display is set to the correct input.
Poor Image Quality or Lag
- Potenza del segnale: Check the signal strength indicator on the LED display. A weak signal can lead to reduced quality or lag. Try repositioning the units for better signal reception.
- Interferenza: Other wireless devices operating on 2.4GHz or 5GHz frequencies might cause interference. Try to move the units away from such devices.
- Alimentazione elettrica: Insufficient power can affect performance. Ensure you are using a stable 5V/2A power adapter for both units.
- Risoluzione sorgente: While the system supports 4K decoding, the output is 1080p@60fps. Ensure your source device's output resolution is compatible.
Garanzia e supporto
VENTION provides a full 24-month replacement warranty for this product, ensuring peace of mind. For any technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact VENTION customer support through the official channels where you purchased the product.
Per maggiori informazioni e supporto, puoi visitare il sito VENTION Official Store on Amazon.
