EVFOFO B0DT15FPQ3

Maschera per terapia con luce rossa EVFOFO

Manuale d'uso

Model: B0DT15FPQ3 | Brand: EVFOFO

1. Introduzione

The EVFOFO Red Light Therapy Mask is a versatile facial device designed for at-home skin care. It utilizes 7 different LED light colors to address various skin concerns, promoting skin rejuvenation and overall facial well-being. This manual provides essential information for the safe and effective use of your device.

EVFOFO Red Light Therapy Mask held by a person

Image: The EVFOFO Red Light Therapy Mask, a flexible black mask with a geometric pattern, held by a user. The mask is designed to cover the face for light therapy treatments.

Features of EVFOFO LED Face Mask

Image: An illustration highlighting key features of the mask, including its comfortable and soft silicone material, 7 LED colors, non-invasive nature, 500mAh power bank capacity, soft eye pads, adjustable strap, and 80 high-quality LEDs.

2. Informazioni sulla sicurezza

Leggere attentamente tutte le istruzioni prima di utilizzare il dispositivo. Conservare il manuale per riferimento futuro.

  • This device is intended for cosmetic use only. It is not a medical device and should not be used to diagnose, treat, cure, or prevent any medical conditions.
  • Consult a healthcare professional before use if you have any pre-existing skin conditions, are pregnant, breastfeeding, or have any medical concerns.
  • Non usare su pelle lesa, irritata o infetta.
  • Avoid direct eye contact with the LED lights. Always use the provided eye protectors.
  • Tenere fuori dalla portata dei bambini.
  • Non immergere il dispositivo in acqua o in altri liquidi.
  • Non utilizzare se il dispositivo o il cavo di ricarica sono danneggiati.
  • Utilizzare solo il cavo di ricarica fornito.

3. Contenuto della confezione

Verificare che tutti gli articoli siano presenti nel pacco:

  • EVFOFO Red Light Therapy Mask (1 unit)
  • Cavo di ricarica USB di tipo C (1 unità)
  • Manuale dell'utente (1 unità)
  • Silicone Eye Protectors (2 units)
  • Adjustable Straps (2 units)

4. Impostazione

4.1 Ricarica del dispositivo

Before first use, fully charge the mask. The mask features a Type-C charging port for convenience.

  1. Locate the Type-C charging port on the top of the mask.
  2. Connect the provided USB Type-C cable to the mask and the other end to a compatible USB power adapter (not included) or computer USB port.
  3. Allow the mask to charge until the indicator light (if present) signals a full charge. A full charge provides approximately 2 hours of use.
Type-C charging port and one-button control on the mask

Immagine: Primo piano view of the mask's top section, showing the Type-C charging port and the single control button for wireless operation.

4.2 Preparazione per l'uso

  1. Cleanse your face thoroughly to remove any makeup, dirt, or oils. Pat dry.
  2. Apply a thin layer of your preferred serum or moisturizer, if desired, before placing the mask.
  3. Install the two silicone eye protectors into the designated slots on the inside of the mask.
  4. Attach and adjust the straps to ensure a snug yet comfortable fit on your head.
Five easy steps for using the LED face mask

Image: A visual guide showing five steps: 1. Washing face and applying serum. 2. Installing eye protectors and adjusting straps. 3. Long pressing the button to open and tapping to change color. 4. Lying flat with eyes closed for 15 minutes of therapy. 5. Applying lotion to moisturize skin after use.

5. Istruzioni per l'uso

5.1 Powering On/Off and Changing Colors

The mask features a single control button located on the top of the device.

  • Per accendere: Long press the control button until the lights illuminate.
  • To Change Color: While the mask is on, short press the control button to cycle through the 7 available colors.
  • Per spegnere: Long press the control button again until the lights turn off.

5.2 Utilizzo consigliato

For optimal results, it is recommended to use the mask for approximately 15 minutes per session. You can lie flat and relax during the treatment.

5.3 Understanding the 7 Colors

The mask offers 7 different light colors, each designed to provide specific benefits:

Diagram showing 7 different LED light colors and their wavelengths

Image: A visual representation of the seven light colors available on the mask, including Red (630nm), Yellow (590nm), Green (520nm), Blue (470nm), Bluish light, Purple light, and White light.

ColoreWavelength (approx.)Beneficio primario
Luce rossa630 nmPromotes collagen production, reduces fine lines.
Luce gialla590 nmImproves skin texture, reduces redness.
Luce verde520 nmBalances skin tone, calms skin.
Luce blu470 nmTargets acne-causing bacteria, reduces inflammation.
Bluish Light(Misto)Combination of blue and green light benefits.
Luce viola(Misto)Combination of red and blue light benefits.
Luce bianca(Misto)Full spectrum light, enhances absorption.

6. Manutenzione

6.1 Cleaning the Mask

Per garantire l'igiene e la longevità del tuo dispositivo:

  • Always power off the mask and disconnect it from the charging cable before cleaning.
  • Wipe the surface of the mask with a soft, damp cloth. You may use a mild, non-abrasive cleanser if necessary.
  • Do not use harsh chemicals, alcohol, or abrasive pads, as these can damage the mask's surface or LEDs.
  • Ensure the mask is completely dry before storing or recharging.

6.2 Conservazione

Conservare la mascherina in un luogo fresco e asciutto, al riparo dalla luce solare diretta e da temperature estreme. Conservarla nella confezione originale o in una custodia protettiva per evitare danni.

7. Risoluzione Dei Problemi

If you encounter any issues with your EVFOFO Red Light Therapy Mask, please refer to the following common problems and solutions:

ProblemaPossibile causaSoluzione
La maschera non si accende.La batteria è scarica o esaurita.Charge the mask fully using the provided Type-C cable.
Le luci sono fioche o tremolanti.Batteria scarica.Recharge the mask.
Cannot change light color.Pressione errata del pulsante.Ensure you are short pressing the control button to cycle through colors. A long press powers the device on/off.
Mask feels uncomfortable.Straps are too tight or eye protectors are not positioned correctly.Adjust the straps for a comfortable fit. Reposition the silicone eye protectors.

Se il problema persiste dopo aver provato queste soluzioni, contattare l'assistenza clienti.

8. Specifiche

  • Modello: B0DT15FPQ3
  • Marca: EVFOFO
  • Conteggio LED: 80 LED
  • Colori chiari: 7 (Red, Yellow, Green, Blue, Bluish, Purple, White)
  • Materiale: Silicone
  • Capacità della batteria: 500mAh
  • Porta di ricarica: USB di tipo C
  • Recommended Session Time: 15 minuti
  • Tempo di utilizzo per carica: Circa 2 ore
Diagram showing key features of the EVFOFO LED mask

Image: An infographic illustrating the mask's features: silicone material, soft eye pads, 80 LEDs, 7 colors of light, and an adjustable strap.

Design features of the EVFOFO LED mask

Image: Highlights of the mask's design: no wiring for convenience, ergonomic design for ease of use, and a high elastic headband suitable for various head sizes.

9. Garanzia e supporto

EVFOFO is committed to providing high-quality products. For information regarding warranty coverage, returns, or technical support, please refer to the product packaging or contact the seller directly through your purchase platform.

Please have your product model number (B0DT15FPQ3) and purchase date ready when contacting support.

© 2024 EVFOFO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.