OutdoorMaster Gem II MIPS Bike Helmet User Manual

1. Introduzione

The OutdoorMaster Gem II MIPS Bike Helmet is engineered to provide enhanced safety and comfort for cyclists. This manual outlines the proper setup, operation, maintenance, and specifications to ensure optimal performance and longevity of your helmet.

2. Informazioni sulla sicurezza

2.1 MIPS Safety System

The helmet incorporates the MIPS (Multi-directional Impact Protection System), a low-friction layer designed to reduce rotational forces that can result from certain angled impacts to the head. This system is intended to provide added safety in specific impact scenarios.

Image: A cutaway diagram of the OutdoorMaster Gem II MIPS helmet, showing the outer shell, the MIPS low-friction layer, and the inner foam, explaining how the system reduces rotational forces.

2.2 General Helmet Safety

• Always wear your helmet correctly fitted and securely fastened when cycling.
• Ensure the helmet sits level on your head, covering your forehead.
• Never use a helmet that has sustained an impact, even if no visible damage is present. Replace it immediately.
• Avoid exposing the helmet to extreme heat or harsh chemicals, as this can compromise its structural integrity.

3. Impostazione

3.1 Adjustable Fit System

The Gem II MIPS helmet features an adjustable retention system for a personalized fit.

1. Place the helmet on your head, ensuring it is level and covers your forehead.
2. Locate the adjustment dial at the rear of the helmet.
3. Turn the dial clockwise to tighten the fit or counter-clockwise to loosen it, until the helmet feels snug and secure without causing discomfort. The helmet should not move excessively when you shake your head.

Image: A detailed image focusing on the rear adjustment dial of the OutdoorMaster Gem II MIPS helmet, demonstrating how to fine-tune the fit for head circumference.

3.2 Regolazione della cinghia

Proper strap adjustment is crucial for helmet stability.

1. Adjust the side straps so they form a 'V' shape just below your ears.
2. Fasten the chin buckle.
3. Tighten the chin strap until it is snug, allowing for two fingers to fit comfortably between the strap and your chin. The buckle should be centered under your chin.

3.3 Ricarica della luce integrata

The helmet features a built-in USB rechargeable LED light for enhanced visibility.

1. Locate the USB Type-C charging port on the rear LED light unit.
2. Connect a USB Type-C cable to the port and to a standard USB power source (e.g., computer, wall adapter).
3. Una carica completa richiede in genere circa 60 minuti.

Image: Close-up of the integrated rear LED light on the OutdoorMaster Gem II MIPS helmet, showing the USB Type-C charging port.

4. Istruzioni per l'uso

4.1 Funzionamento della luce LED

The integrated LED light provides three distinct lighting modes for varying visibility needs.

1. Press the power button on the rear light unit to turn it on.
2. Press the button repeatedly to cycle through the available modes:
• Modalità fissa: Continuous illumination (up to 4 hours of use).
• Fast Flashing Mode: Rapid flashing for increased attention (up to 7 hours of use).
• Slow Flashing Mode: Slower, rhythmic flashing (up to 13 hours of use).
3. Tenere premuto il pulsante di accensione per spegnere la luce.

Image: A cyclist wearing the OutdoorMaster Gem II MIPS helmet from behind, with the integrated rear LED light clearly visible and illuminated, demonstrating its visibility feature.

5. Manutenzione

5.1 Pulizia del casco

• Conchiglia: Clean the helmet's exterior shell with a soft, damp cloth and mild soap. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the helmet's materials and finish.
• Imbottitura: The interior padding is removable and washable. Gently detach the padding, hand wash it with mild soap and water, and allow it to air dry completely before reinserting.

Image: A close-up image showing a hand detaching the interior padding from the helmet, illustrating the removable and washable design for maintenance.

5.2 Conservazione

Store your helmet in a cool, dry place away from direct sunlight and extreme temperatures. Do not store it near heat sources or in areas where it might be exposed to chemicals.

5.3 Ispezione

Regularly inspect your helmet for any signs of wear or damage, including cracks, dents, or frayed straps. If any damage is found, or if the helmet has been involved in an impact, it must be replaced.

6. Risoluzione Dei Problemi

• Luce LED non funzionante: Ensure the integrated LED light is fully charged. If the light does not turn on or hold a charge after proper charging, contact customer support.
• Helmet Feels Loose or Uncomfortable: Re-adjust the rear dial and chin straps according to the 'Adjustable Fit System' and 'Strap Adjustment' sections. Verify that you have selected the correct helmet size based on your head circumference.

7. Specifiche

8. Guida alle taglie

To determine your correct helmet size, measure your head circumference just above your ears and level from front to back.

Image: An image showing a person wearing the helmet, accompanied by a size chart indicating head circumference ranges for Small, Medium, and Large sizes, and a diagram on how to measure head size.

9. Garanzia e supporto

For warranty information, technical support, or any inquiries regarding your OutdoorMaster Gem II MIPS Bike Helmet, please refer to the official OutdoorMaster webo contattare il servizio clienti. Conservare la prova d'acquisto per eventuali reclami in garanzia.