Swarn Jal A-AL20M
Swarn Jal Tank Overflow & Empty Alarm
Model: A-AL20M
1. Introduzione
The Swarn Jal Tank Overflow & Empty Alarm system is designed to provide 24/7 monitoring of your water tank, ensuring safety and preventing water wastage due to overflow or the inconvenience of an empty tank. This cell-powered device offers a reliable and shock-proof solution for automated water level alerts in your home.
It features brass sensors for accurate detection and is engineered for long battery life, providing peace of mind and efficient water management.
2. Caratteristiche del prodotto
- 100% Shock Proof: Designed for safety with a shock-proof build.
- Durata prolungata della batteria: Operates for 1 to 3 years on a single set of 2 AA cells.
- Water Overflow Alarm: Alerts the user before the tank overflows, with an automatic shut-off after 45 seconds.
- Reserve Water Alarm: Notifies the user when the water level is low, before the tank goes empty.
- Brass Sensors: Equipped with high-quality brass sensors that are rust/corrosion proof, nickel plated, highly accurate, and provide strong hold.
- Wire Breakage Warning: Provides an indication (Red or Violet Color in LED) if the sensor wire is broken.
- Avviso di batteria scarica: A short beep every two hours indicates low battery.
- Controllo tramite pulsante touch: Long touch to switch the device on/off. Short touch to view the current water level.
- Installazione semplice: Can utilize existing overflow alarm wires, eliminating the need for new wiring.
Figure 2.1: Key features and functions of the Swarn Jal alarm system.
Figura 2.2: dettagliata view of the included brass sensors.
3. Cosa c'è nella scatola
Upon unboxing your Swarn Jal Tank Overflow & Empty Alarm, you will find the following components:
- Main Device/Alarm/Indicator Unit
- 3 Brass Sensors
- Sensor Hub (100% Waterproof)
- 2 AA Cells (Batteries)
Figura 3.1: Componenti principali inclusi nella confezione.
Figure 3.2: The alarm unit, sensor hub, and brass sensors.
4. Configurazione e installazione
Follow these steps for proper installation of your Swarn Jal Tank Overflow & Empty Alarm:
- Posizionamento del sensore: Identify the desired water levels in your tank for 'Full', 'Standard' (Normal), and 'Reserve' (Empty) alerts. Place the three brass sensors at these respective levels. Ensure the sensors are securely fastened and will not shift with water movement.
- Connect Sensors to Hub: Connect the wires from the three brass sensors to the waterproof Sensor Hub. Ensure a firm connection for reliable operation.
- Connect Sensor Hub to Main Device: Connect the Sensor Hub to the Main Device/Alarm/Indicator Unit using the provided 20-meter wire. This system is designed to work with a single pair transmission cable, and you can often use existing overflow alarm wires, extending up to 200 meters for multi-story buildings if needed.
- Inserire le batterie: Open the battery compartment on the Main Device and insert the two AA cells provided, ensuring correct polarity.
- Mount Main Device: Place the Main Device in a convenient location where the alarm can be easily heard. It is designed for floor mounting but can be placed on a shelf or wall-mounted if desired.
Figure 4.1: Installation diagram showing sensor and device connections.
5. Istruzioni per l'uso
The Swarn Jal alarm system is designed for simple operation:
- Accensione/spegnimento: Long press the touch button on the front of the Main Device to switch the unit on or off.
- Indicazione del livello dell'acqua: A short press of the touch button will illuminate the LEDs to show the current water level (Full, Standard, Reserve).
- Allarme di traboccamento: When the water level reaches the 'Full' sensor, the alarm will sound. The alarm will automatically shut off after 45 seconds.
- Reserve Water Alarm: When the water level drops to the 'Reserve' sensor, the alarm will sound, indicating that the tank is nearly empty.
- Avviso batteria scarica: The device will emit a short beep every two hours when the battery power is low, signaling that the AA cells need replacement.
- Wire Breakage Indication: If there is a break in the sensor wire, the LED indicator on the Main Device will show a Red or Violet color, alerting you to a connection issue.
6. Manutenzione
To ensure optimal performance and longevity of your Swarn Jal alarm system, consider the following maintenance tips:
- Pulizia del sensore: Periodically inspect the brass sensors in the water tank for any buildup of sediment or mineral deposits. Gently clean them with a soft cloth to ensure accurate water level detection.
- Sostituzione della batteria: Replace the two AA cells when the low battery warning (short beep every two hours) is activated. Use good quality alkaline batteries for best performance and battery life.
- Ispezione del filo: Occasionally check the sensor wire for any signs of wear, damage, or corrosion, especially at connection points. Address any issues promptly to prevent wire breakage.
- Pulizia del dispositivo: Keep the Main Device unit clean and free from dust. Wipe with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
7. Risoluzione Dei Problemi
If you encounter issues with your Swarn Jal alarm, refer to the following common problems and solutions:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Alarm not sounding or false alarms | Sensors are dirty or corroded; Sensors are not placed correctly; Wire connection issue. | Clean the brass sensors. Ensure sensors are at the correct water levels and securely fastened. Check all wire connections between sensors, sensor hub, and main device. |
| Low alarm sound/buzzer volume | This model has a fixed sound output. | Ensure the device is placed in a location where the 85 dB alarm can be clearly heard. Consider placing it closer to areas where occupants are frequently present. |
| Il dispositivo non si accende | Batterie scariche o inserite in modo errato. | Replace the AA batteries with new ones, ensuring correct polarity (+/-). |
| Wire Breakage Indication (Red/Violet LED) | Break in the sensor wire or loose connection. | Inspect the entire length of the sensor wire for any cuts or damage. Check the connections at both the sensor hub and the main device. Repair or replace the wire if necessary. |
| Alarm sounds continuously or erratically | Sensor malfunction or water bridging between sensors. | Ensure sensors are clean and properly spaced. If the issue persists, contact customer support. |
8. Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Numero di modello | A-AL20M (Overflow and Reserve Alarm) |
| Voltage | 3 Volt (CC) |
| Metodo di controllo | Tocco |
| Livello di rumore | 85 dB |
| Tipo di montaggio | Montaggio a pavimento |
| Tecnologia | Contact Sensor (Brass) |
| Fonte di alimentazione | Alimentato a batteria (2 batterie AA, incluse) |
| Durata della batteria | 1-3 Years (approx.) |
| Dimensioni del prodotto (LxWxH) | 14 x 8 x 3.5 centimetri |
| Peso dell'articolo | 360 grammi |
| Componenti inclusi | Main Device, 3 Brass Sensors, Sensor Hub, 2 AA Cells |
| Paese di origine | India |
9. Informazioni sulla garanzia
Your Swarn Jal Tank Overflow & Empty Alarm comes with a 1 Year Complete Replacement Guarantee from the date of purchase. This warranty covers manufacturing defects and ensures replacement of the product if it fails due to such issues under normal use. Please retain your purchase receipt for warranty claims.
10. Assistenza clienti
For any installation assistance, guidance, issue resolution, or other queries regarding your Swarn Jal product, our customer care team is available 24/7.
Please Call or WhatsApp us on: +91-9050526767
Figure 10.1: Swarn Jal Customer Support contact information.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.