Seauto Cordless Robotic Pool Cleaner SEAUTO-UFO Instruction Manual

1. Introduzione

Thank you for choosing the Seauto Cordless Robotic Pool Cleaner, Model SEAUTO-UFO. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your new pool cleaner. Please read this manual thoroughly before initial use and retain it for future reference.

2. Informazioni sulla sicurezza

WARNING: Read all safety warnings and instructions before using this appliance. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

• Prima di collegare il caricabatterie, assicurarsi che la porta di ricarica sia asciutta.
• Non utilizzare l'aspirapolvere se il cavo di alimentazione o il caricabatterie sono danneggiati.
• Keep children and pets away from the pool area when the cleaner is in operation or charging.
• Only use the original charger provided by the manufacturer.
• Do not use the cleaner to remove large debris such as leaves, branches, or rocks, as this may damage the unit. Manually remove large debris before operating the cleaner.
• Rimuovere il pulitore dalla piscina dopo ogni ciclo di pulizia e prima di caricarlo.
• Quando non lo si utilizza, conservare il detergente in un luogo fresco e asciutto, lontano dalla luce solare diretta.

3. Contenuto della confezione

Verificare che tutti gli articoli siano presenti nel pacco:

• 1 x Seauto G900 Pool Cleaner (Model SEAUTO-UFO)
• 1 x gancio di recupero
• 1 x adattatore di alimentazione
• 1 x Manuale utente (questo documento)
• 1 x Filtro

Image: Contents of the Seauto Cordless Robotic Pool Cleaner package.

4. Prodotto finitoview

The Seauto Cordless Robotic Pool Cleaner is designed for efficient and autonomous cleaning of various pool types. Its key features include:

• Design senza fili: Eliminates the need for hoses and tangled cords, offering hands-free operation.
• Durata della batteria robusta: Fornisce fino a 60 minuti di pulizia con una singola carica.
• Forte aspirazione: Equipped with 6000Pa suction power to effectively remove debris.
• Parcheggio automatico: Returns to the pool edge when the battery is low for easy retrieval.

Image: The cordless design of the Seauto pool cleaner in operation.

Image: Battery specifications including capacity, running time, and charging duration.

Image: Depiction of the cleaner's powerful suction capability.

Image: The automatic parking feature of the pool cleaner.

5. Impostazione

5.1 Carica iniziale

1. Assicurarsi che l'aspirapolvere sia completamente asciutto prima di caricarlo.
2. Connect the power adapter to the charging port located on the underside of the cleaner.
3. Collega l'alimentatore a una presa elettrica standard.
4. Per una carica completa sono necessarie circa 2.3 ore. La spia luminosa cambierà per confermare lo stato di carica.

5.2 Posizionamento in piscina

1. Once fully charged, ensure the charging port cover is securely closed.
2. Immergere delicatamente il pulitore nella piscina. Affonderà sul fondo.
3. Prima di iniziare a utilizzare l'apparecchio, assicurarsi che il pulitore sia completamente immerso.

6. Istruzioni per l'uso

6.1 Avvio dell'operazione

• After placing the cleaner in the pool, press the power button (usually located on the top or side) to start the cleaning cycle.
• The cleaner will begin to move across the pool floor, collecting debris.

6.2 Ciclo di pulizia

• The cleaner operates for approximately 60 minutes on a full charge.
• It is designed to clean pool areas up to 645 sq. ft. (60 m²) and pools with a diameter of up to 28.67 ft (8.74 m).
• The cleaner is suitable for flat-bottom pools with a slope of 10° or less, and compatible with various pool shapes, including above-ground and indoor swimming pools.

Image: Maximum cleaning area specifications.

Image: Supported and unsupported pool types for the cleaner.

6.3 Parcheggio e recupero automatici

• When the battery level is low, the cleaner will automatically move to the nearest pool edge.
• Use the provided retrieval hook to carefully lift the cleaner out of the water.
• Always remove the cleaner from the pool after each use to prevent damage and prolong battery life.

7. Manutenzione

7.1 Pulizia del filtro

Pulire regolarmente il filtro per mantenere prestazioni di aspirazione ottimali.

1. After removing the cleaner from the pool, open the filter compartment.
2. Rimuovere il cestello del filtro.
3. Rinse the filter thoroughly with a garden hose to remove all collected debris.
4. Ensure the filter is clean and dry before reinserting it into the cleaner.
5. Chiudere saldamente il vano filtro.

Image: Cleaning the filter with a hose.

7.2 Conservazione

• After cleaning, ensure the cleaner is completely dry before storing.
• Conservare il detergente in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.
• For long-term storage, it is recommended to charge the battery to approximately 50% every three months to maintain battery health.

8. Risoluzione Dei Problemi

9. Specifiche

10. Garanzia e supporto

10.1 Garanzia limitata

The Seauto Cordless Robotic Pool Cleaner comes with a limited warranty. Please refer to the warranty card included in your package for specific terms and conditions. This warranty typically covers manufacturing defects under normal use.

10.2 Assistenza clienti

For technical assistance, warranty claims, or any questions regarding your Seauto pool cleaner, please contact Seauto customer support through the retailer where the product was purchased or visit the official Seauto websito per le informazioni di contatto.