JBL JBLPARTYBOX120AM

JBL PartyBox Club 120 Portable Wireless Speaker User Manual

Modello: JBLPARTYBOX120AM

Introduzione

This manual provides comprehensive instructions for the JBL PartyBox Club 120 portable wireless speaker. It covers essential information regarding product setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device. Please read this manual thoroughly before using the speaker.

Cosa c'è nella scatola

Dopo aver disimballato, verificare che siano presenti tutti i seguenti elementi:

  • 1 x JBL PartyBox 120 Portable Wireless Speaker
  • 1 x cavo di alimentazione CA.
  • 1 x cavo ausiliario
  • 1 panno in microfibra
JBL PartyBox Club 120 speaker, front view con luce blu

Immagine: Frontale view dell'altoparlante JBL PartyBox Club 120, mostratoasing its grille and illuminated JBL logo.

Impostare

1. Ricarica dell'altoparlante

Before initial use, fully charge the speaker. Connect the provided AC power cord to the speaker's power input and then to a wall outlet. The charging indicator will show the battery status. A full charge provides approximately 12 hours of playtime.

2. Accensione/Spegnimento

  • To power on: Press the Power button located on the control panel.
  • To power off: Press and hold the Power button until the speaker shuts down.

3. Accoppiamento Bluetooth

  1. Assicurarsi che l'altoparlante sia acceso.
  2. Press the Bluetooth button on the speaker. The Bluetooth indicator will flash, indicating it is in pairing mode.
  3. Sul tuo dispositivo mobile (smartphone, tablet o laptop), attiva il Bluetooth e cerca i dispositivi disponibili.
  4. Select "JBL PartyBox Club 120" from the list of devices.
  5. Once paired, the Bluetooth indicator will glow solid, and you will hear a confirmation sound.
JBL PartyBox Club 120 speaker, front view with multi-color light

Immagine: Frontale view of the JBL PartyBox Club 120 speaker, displaying dynamic multi-color lighting effects.

4. Collegamento AUX

Per collegare un dispositivo audio tramite l'ingresso ausiliario:

  1. Connect one end of the provided auxiliary cable to the AUX IN port on the speaker.
  2. Connect the other end of the auxiliary cable to the headphone jack or audio output of your device.
  3. The speaker will automatically switch to AUX input mode, or you may need to select it manually using the input source button.

Istruzioni per l'uso

1. Riproduzione audio

  • Controllo del volume: Use the volume up (+) and volume down (-) buttons on the speaker or your connected device to adjust the audio level.
  • Riproduci/Pausa: Premere il pulsante Riproduci/Pausa per avviare o interrompere la riproduzione audio.
  • Navigazione della traccia: Use the skip forward and skip backward buttons to change tracks.

2. Caratteristiche dello spettacolo di luci

The JBL PartyBox Club 120 features dynamic LED lighting effects that synchronize with your music. Use the dedicated Light Mode button on the speaker to cycle through different light patterns or turn the lights off.

JBL PartyBox Club 120 speaker, side view con luce blu

Immagine: Lato view of the JBL PartyBox Club 120 speaker, showing its robust design and a blue light effect.

3. Splash Proof Design

The speaker is designed to be splash-proof, making it suitable for outdoor use and near water. However, it is not fully waterproof and should not be submerged in water. Ensure all port covers are securely closed to maintain splash resistance.

Manutenzione

  • Pulizia: Utilizzare il panno in microfibra fornito o un panno morbido,amp cloth to clean the speaker's exterior. Avoid using abrasive cleaners or solvents.
  • Magazzinaggio: Conservare l'altoparlante in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.
  • Cura della batteria: Per prolungare la durata della batteria, evitare di scaricarla completamente frequentemente. Caricare regolarmente l'altoparlante, anche se non lo si utilizza per lunghi periodi.

Risoluzione dei problemi

ProblemaPossibile causaSoluzione
Nessun potereBattery is depleted; Power cord not connectedCharge the speaker; Ensure power cord is securely connected to speaker and outlet
Nessun suonoVolume too low; Incorrect input source; Device not playing audioIncrease volume on speaker and device; Select correct input source (Bluetooth/AUX); Ensure audio is playing on connected device
Il Bluetooth non si connetteAltoparlante non in modalità di associazione; Bluetooth del dispositivo disattivato; Troppo lontano dall'altoparlantePress Bluetooth button to enter pairing mode; Enable Bluetooth on device; Move device closer to speaker (within 30 feet)
Lo spettacolo di luci non funzionaModalità luce disattivata; malfunzionamento dell'altoparlantePress Light Mode button to activate; Contact support if issue persists

Specifiche

MarcaMarchio JBL
Numero di modelloJBLPARTYBOX120AM
Uscita Wattage160 Watt
Tecnologia di connettivitàAUX, bluetooth
Fonte di alimentazioneAlimentato a batteria, elettrico con cavo
Tipo di batteriaRicaricabile
Dimensioni articolo (L x P x A)11.6 x 11.8 x 22 pollici
Peso dell'articolo25 libbre
ColoreNero
MaterialePlastica, gomma
Dispositivi compatibiliSmartphone, Tablet, Computer portatile
Tipo di montaggioDa tavolo
Codice UPC094148647852

Garanzia e supporto

Per informazioni dettagliate sulla garanzia, fare riferimento alla scheda di garanzia inclusa con il prodotto o visitare il sito ufficiale JBL website. For technical support, product registration, or service inquiries, please contact JBL customer support through their official channels.

Note: This manual provides general guidance. Specific features and operations may vary. Always refer to the latest information available from the manufacturer.

© 2024 JBL. Tutti i diritti riservati.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.