VASAGLE Bar Table with Power Outlets

Introduzione

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your VASAGLE Bar Table with Power Outlets. Please read this manual thoroughly before assembly and use to ensure safe and efficient operation.

Image: VASAGLE Bar Table with Power Outlets in Ebony Black, showcasinil suo design e la sua funzionalità.

Informazioni sulla sicurezza

ATTENZIONE: la mancata osservanza di queste istruzioni di sicurezza può causare lesioni o danni al prodotto.

• Eseguire sempre il montaggio seguendo le istruzioni fornite.
• Do not exceed the maximum weight limit of 220 lb (100 kg) to ensure stability and prevent accidents.
• Assicurarsi che tutte le viti e gli elementi di fissaggio siano ben serrati prima dell'uso. Controllare periodicamente e serrare nuovamente se necessario.
• Durante il montaggio, tenere le parti di piccole dimensioni lontano dalla portata dei bambini.
• Posizionare il tavolo su una superficie piana per evitare che si ribalti.
• Non appoggiare oggetti caldi direttamente sulla superficie senza protezione.
• Avoid exposing the table to excessive moisture or direct sunlight for prolonged periods.

Contenuto della confezione

Before beginning assembly, please verify that all parts listed below are present and undamaged.

• 1 x Bar Table (Part A)
• 1 x Top Panel (Part B)
• 1 x Side Panel with Power Strip Cutout (Part C)
• 1 x Side Panel (Part D)
• 1 x Back Panel (Part E)
• 2 x Long Side Rails (Part F)
• 1 x Horizontal Support Bar (Part G)
• 2 x Short Side Rails (Part H)
• 2 x Leg Frames (Part I)
• 2 x Hooks (Part J)
• 1 x Non-woven Fabric Drawer (Part K)
• 1 x Drawer Bottom Panel (Part L)
• 1 x Power Strip (Part M)
• 4 x Screws (Type 1)
• 8 x Screws (Type 2)
• 10 x Screws (Type 3)
• 26 x Screws (Type 4)
• 10 x Screws (Type 5)
• 2 x Screws (Type 6)
• 16 x Wooden Dowels (Type 7)
• 8 x Cam Lock Bolts (Type 8)
• 8 x Cam Locks (Type 9)
• 4 x Adjustable Feet (Type 10)
• 1 x Allen Key (Type 11)
• 1 x Screwdriver (Type 12)
• 23 x Stickers (Type 13)
• 1 x Manuale di istruzioni

Immagine: Oltreview of the bar table with key dimensions and components labeled, including the movable drawer and power strip.

Installazione e assemblaggio

Follow these steps carefully to assemble your bar table. An assembly video is also provided for visual guidance.

Guida video di montaggio

Istruzioni di montaggio passo dopo passo

1. Montare la base del telaio: Attach the adjustable feet (10) to the bottom of the two leg frames (I). Connect the horizontal support bar (G) between the two leg frames (I) using screws (4). Loosely tighten the screws at this stage per consentire aggiustamenti.
2. Fissare il pannello superiore: Place the top panel (B) onto the assembled leg frames (I). Secure it using screws (4) and wooden dowels (7). Ensure the holes for the power strip are correctly oriented on one side. Loosely tighten these screws.
3. Installare i pannelli laterali: Insert wooden dowels (7) into side panels (C and D). Attach side panels (C and D) to the top panel (B) and the leg frames (I) using screws (5). Make sure panel C, which has the cutout for the power strip, is facing outwards. Loosely tighten these screws.
4. Installare il pannello posteriore: Attach the back panel (E) to the top panel (B) and the side panels (C and D) using wooden dowels (7) and screws (1).
5. Assemble Bottom Shelf: Attach the bottom shelf (A) to the leg frames (I) using screws (3) and cam lock fasteners (8, 9).
6. Installare la ciabatta elettrica: Secure the power strip (M) into the designated cutout on panel C using screws (6).
7. Serraggio finale: Once all components are in place, adjust the table to ensure it is level and stable. Fully tighten all previously loosely tightened screws using the provided Allen key (11) and screwdriver (12).
8. Applica adesivi: Cover visible screw holes with the provided stickers (13) for a clean finish.
9. Assemblare e inserire il cassetto: Assemble the non-woven fabric drawer (K) and insert the bottom panel (L). Place the assembled drawer into the designated compartment.
10. Attacca i ganci: Secure the two hooks (J) to the side of the table as desired.

Caratteristiche e istruzioni per l'uso

Prese di corrente integrate

The bar table includes a built-in charging station with 2 AC outlets (125V/12A) and 2 USB ports (5V/2A). The 6.6 ft long power cord allows for flexible placement. Simply plug the table's power cord into a wall outlet to activate the charging station. Use the AC outlets for larger electronics and the USB ports for charging mobile devices.

Image: Detail of the power strip with two AC outlets and two USB ports, ready for device charging.

Movable Storage Drawer

The table features a non-woven fabric drawer (11.7" x 14.2" x 3") that can be moved within the large open compartment or removed entirely. This provides versatile storage for small items, office supplies, or personal belongings. To move the drawer, simply lift it out and place it in your desired position within the open space.

Image: The movable drawer shown in different positions within the table's storage compartment, highlighting its flexibility.

Practical Side Hooks

Two side hooks are included, offering a convenient place to hang items such as charging cables, headphones, or small bags. These hooks help keep your essentials organized and within easy reach.

Image: Headphones and a small bag hanging on the side hooks, demonstrating their practical use.

Adjustable and Protective Feet

The table is equipped with adjustable feet. These allow you to stabilize the high top table on slightly uneven surfaces, ensuring it remains steady. Additionally, they help prevent scratches on your floor. To adjust, simply twist the feet clockwise or counter-clockwise until the table is level.

Immagine: un primo piano view of the adjustable feet, illustrating their function for stability on uneven floors.

Manutenzione

• Pulizia: Pulisci la superficie del tavolo con un panno morbido eamp panno. Evitare prodotti chimici aggressivi o detergenti abrasivi che potrebbero danneggiare la finitura.
• Fuoriuscite: Pulire immediatamente eventuali fuoriuscite per evitare macchie, soprattutto sulla superficie in legno ingegnerizzato.
• Controllo di stabilità: Controllare periodicamente tutte le viti e i collegamenti per assicurarsi che siano ben serrati. Serrarli nuovamente se necessario per mantenere la stabilità.
• Cura delle multiprese: Ensure the power strip is kept dry. Do not overload the outlets.

Risoluzione dei problemi

Specifiche

Garanzia e supporto

Your VASAGLE Bar Table is covered by a return policy. For specific warranty details, please refer to the documentation included with your purchase or contact the seller directly.

• Politica di ritorno: Resi facili entro 30 giorni.
• Produttore: VASAGLE
• Venditore: SONGMICS HOME US
• Per l'assistenza clienti, visitare il sito SONGMICS HOME US seller page on Amazon.