STANLEY Quick Flip GO Bottle 24 OZ

Stanley Quick Flip GO Water Bottle 24 oz Instruction Manual

Model: Quick Flip GO Bottle 24 OZ

1. Prodotto finitoview

The Stanley Quick Flip GO Water Bottle 24 oz is designed for portability and temperature retention. It features double-wall vacuum insulation to keep beverages hot or cold for extended periods, a leak-resistant push-button lid for easy one-handed use, and durable 18/8 stainless steel construction. All materials are BPA-free.

Stanley Quick Flip GO Water Bottle, Azure color, with lid removed

Image 1.1: Stanley Quick Flip GO Water Bottle (Azure) with its lid detached, showing the wide mouth opening.

Caratteristiche principali:

  • Isolamento a doppia parete: Keeps drinks hot for up to 8 hours or cold for up to 12 hours.
  • Costruzione durevole: Made from 18/8 stainless steel for longevity.
  • Coperchio anti-perdita: Push-button activated lid prevents spills and allows for one-handed operation.
  • Materiali senza BPA: Garantisce il consumo sicuro delle bevande.
  • Car Cup Holder Compatible: Designed to fit most standard car cup holders.
Infographic showing features of Stanley Quick Flip GO bottle: 18/8 Stainless Steel, Dishwasher Safe, Leakproof + Packable, BPA Free, Double-Wall Vacuum Insulation, Flip Straw Lid for easy sipping.

Image 1.2: Visual representation of the bottle's key features, including material, insulation, and lid design.

2. Impostazione

  1. Disimballare: Remove the water bottle and all components from its packaging.
  2. Pulizia iniziale: Before first use, wash the bottle and lid thoroughly with warm, soapy water. Rinse completely.
  3. Montaggio: Ensure the lid components are correctly assembled and securely fastened to the bottle.

3. Istruzioni per l'uso

Riempimento della bottiglia:

  1. Svitare il coperchio dalla bottiglia.
  2. Fill the bottle with your desired beverage. Do not overfill; leave space for the lid.
  3. Screw the lid back onto the bottle securely to ensure a leak-resistant seal.
Stanley Quick Flip GO Water Bottle with lid open, showing the mouthpiece and internal mechanism.

Image 3.1: The bottle's lid in the open position, revealing the drinking spout and internal components.

Using the Push-Button Lid:

  1. To open the mouthpiece, press the button located on the lid. The lid will flip open.
  2. To close and seal the mouthpiece, push the lid back down until it clicks into place.
  3. For added security during transport, engage the metal latch on the side of the lid to prevent accidental opening.
Stanley Quick Flip GO Water Bottle in Azure color, shown with the push-button lid open and the metal latch engaged.

Image 3.2: The bottle with its lid open and the security latch in use, demonstrating its leak-resistant design.

Dimostrazioni video:

Video 3.3: Demonstration of the Stanley Quick Flip GO Water Bottle's push-button lid and free sip feature.

Video 3.4: Utente review highlighting the ease of use and temperature retention of the bottle.

4. Manutenzione e cura

Pulizia:

  • Lavare solo a mano: The manufacturer recommends hand washing for this product.
  • Pulizia del coperchio: The lid is designed with a wide mouth tumbler opening, making it easy to clean by hand. Disassemble the lid components if necessary for thorough cleaning.
  • Use warm, soapy water and a bottle brush for the interior. Rinse thoroughly.
  • Assicurarsi che tutti i componenti siano asciutti prima di rimontarli e riporli.
Stanley Quick Flip GO Water Bottle lid disassembled into its components for cleaning.

Image 4.1: The lid of the Stanley Quick Flip GO bottle shown disassembled, illustrating how to clean its individual parts.

Cura generale:

  • Do not use abrasive cleaners or scrubbers, as these can damage the finish.
  • Do not microwave or place in an oven.
  • Store with the lid off or slightly ajar to prevent odors.

5. Risoluzione Dei Problemi

ProblemaPossibile causaSoluzione
Perdite dalla bottigliaLid not screwed on tightly; mouthpiece not fully closed; lid gasket improperly seated or damaged.Ensure lid is securely tightened. Press mouthpiece lid until it clicks. Check lid gasket for proper seating and damage; replace if necessary.
Drinks not staying hot/coldLid not sealed properly; extreme external temperatures; bottle damaged.Ensure lid is fully closed and sealed. Avoid leaving the bottle in direct sunlight or extreme cold for prolonged periods. Inspect bottle for dents or damage to insulation.
Difficulty opening/closing lidDebris in mechanism; lid components misaligned.Clean the lid thoroughly, ensuring no debris is obstructing the push-button or flip mechanism. Reassemble carefully.

Video 5.1: Comparison video between 24 oz and 36 oz Stanley Quick Flip Go Bottles, useful for understanding size and features.

6. Specifiche

  • Marca: STELLA
  • Nome modello: Stanley Quick Flip GO Bottle 24 OZ
  • Capacità: 24 once fluide
  • Colore: Azzurro
  • Materiale: Acciaio inossidabile (18/8)
  • Caratteristica speciale: A prova di perdite
  • Tipo di cappuccio: Flip Top Cap (Push Button)
  • Isolamento: Double Wall Vacuum Insulation
  • Dimensioni (L x A): 3.5"L x 11.5"A
  • Senza BPA:
  • Lavabile in lavastoviglie: No (Hand Wash Only recommended)
  • Microondabile: NO
  • Codice UPC: 041604392412
Diagram showing the dimensions of the Stanley Quick Flip GO Water Bottle: 11.5 inches height and 3.5 inches width.

Image 6.1: Detailed dimensions of the Stanley Quick Flip GO Water Bottle.

7. Garanzia e supporto

Garanzia a vita: Stanley products are 'BUILT FOR LIFE' and come with a lifetime warranty. This warranty covers manufacturing defects and ensures capable gear for food and drink, built to last a lifetime. For warranty claims or support, please contact Stanley customer service or visit the official Stanley websito.

Per ulteriore assistenza, fare riferimento a Official STANLEY Store on Amazon.

© 2026 STANLEY. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.