Manuale utente del set tastiera e mouse Bluetooth Arteck

1. Introduzione

Thank you for choosing the Arteck Bluetooth Keyboard and Mouse Set. This manual provides detailed instructions for setting up, operating, and maintaining your new wireless input devices. This set is designed for multi-device connectivity, allowing seamless switching between up to three Bluetooth-enabled devices.

Figure 1.1: Arteck Bluetooth Keyboard and Mouse Set

This image displays the full Arteck Bluetooth keyboard and the ergonomic mouse, showcasingrazie al loro design elegante e al fattore di forma compatto.

2. Contenuto della confezione

• Arteck HB192 Multi-pairing Bluetooth Keyboard
• Arteck MB167 Multi-pairing Bluetooth Mouse
• Cavo di ricarica USB di tipo C.
• Manuale dell'utente (questo documento)

3. Configurazione e associazione

The Arteck keyboard and mouse can connect to up to three different Bluetooth devices simultaneously. Follow these steps to pair your devices:

1. Accensione: Ensure both the keyboard and mouse are fully charged and powered on. The power switch for the keyboard is located on the top right edge, and for the mouse, it is on the bottom.
2. Seleziona un canale: On the keyboard, press the Bluetooth channel key (BT1, BT2, or BT3) for approximately 3-5 seconds until the corresponding indicator light flashes rapidly. On the mouse, press the channel switch button on the bottom until the desired channel light (1, 2, or 3) flashes.
3. Abilita il Bluetooth sul tuo dispositivo: Go to the Bluetooth settings on your computer, tablet, or smartphone.
4. Cercare Dispositivi: Your device will scan for available Bluetooth devices. Look for "Arteck Keyboard" and "Arteck Mouse" in the list.
5. Paio: Select each device to pair. Follow any on-screen prompts, such as entering a pairing code if requested. Once paired, the indicator light on the keyboard/mouse will stop flashing and remain solid for a few seconds, then turn off.
6. Repeat for Other Devices: To connect to a second or third device, repeat steps 2-5, selecting a different Bluetooth channel (BT2/BT3 for keyboard, 2/3 for mouse) each time.

Figure 3.1: Multi-Device Connection Setup

This image illustrates how the Arteck keyboard and mouse can be simultaneously connected to three different devices, such as an iPad, a desktop computer, and a laptop, with dedicated buttons for switching between them.

4. Istruzioni per l'uso

4.1. Passaggio da un dispositivo all'altro

Una volta associati più dispositivi, puoi passare facilmente da uno all'altro:

• Tastiera: Simply press the BT1, BT2, or BT3 key once to switch to the corresponding paired device. The indicator light will briefly illuminate to confirm the switch.
• Topo: Press the channel switch button on the bottom of the mouse to cycle through the paired devices (1, 2, 3). The corresponding indicator light will briefly illuminate.

Figure 4.1: Keyboard Multi-Device Switching

This image highlights the dedicated BT1, BT2, and BT3 keys on the keyboard, used for quick switching between three paired Bluetooth devices.

Figure 4.2: Mouse Multi-Device Switching

This image shows the channel switch button on the bottom of the mouse, allowing users to easily toggle between three connected devices.

4.2. Funzioni della tastiera

The keyboard features a full-size layout with dedicated function keys and media controls. It supports various operating systems, including Windows, iOS, iPad OS, Android, and Mac OS, with specific function keys adapting to each OS.

• Tasti funzione (F1-F12): These keys perform various system-specific functions, such as media control (play/pause, volume), brightness adjustment, and more.
• Tasti a forbice: Provides a quiet and comfortable typing experience with a low-profile progetto.

4.3. Funzioni del mouse

The ergonomic mouse is designed for comfortable operation and enhanced productivity.

• Regolazione DPI: The mouse features a DPI switch button, allowing you to adjust the cursor sensitivity to 800, 1200, 1600, 2000, or 2400 DPI. Press the DPI button (located near the scroll wheel) to cycle through the settings.
• Pulsanti laterali: Dedicated side buttons enable quick 'back' and 'forward' navigation in web browsers and other applications, improving work efficiency.
• Clic silenzioso: The mouse buttons are designed for quiet operation, minimizing disturbance.

Figure 4.3: Mouse Features

This image highlights the key features of the Arteck mouse, including its side buttons for navigation, the 5-level DPI adjustment button, and its quiet click design.

5. Batteria e ricarica

Both the keyboard and mouse are equipped with built-in rechargeable lithium-ion batteries. Use the provided USB Type-C cable for charging.

• Ricarica: Connect the USB Type-C cable to the charging port on the keyboard (top right edge) or mouse (front edge) and plug the other end into a USB power source (e.g., computer USB port, USB wall adapter).
• Indicatore di carica: The indicator light will show charging status. It typically turns red while charging and green or off when fully charged.
• Durata della batteria: A full charge can provide approximately 6 months of use for the keyboard and 4 months for the mouse, based on 2 hours of continuous daily use.
• Avviso di batteria scarica: The indicator light will flash slowly when the battery is low, signaling that charging is required.

Figure 5.1: Charging the Keyboard and Mouse

This image shows the USB-C charging ports on both the keyboard and mouse, illustrating how to connect them for recharging.

6. Manutenzione

To ensure the longevity and optimal performance of your Arteck keyboard and mouse, follow these maintenance guidelines:

• Pulizia: Utilizzare un panno morbido, asciutto e privo di lanugine per pulire le superfici della tastiera e del mouse. Per lo sporco ostinato, leggermente dampPulire il panno con acqua o una soluzione detergente delicata. Evitare l'eccessiva umidità.
• Evitare i liquidi: Do not expose the devices to liquids. In case of accidental spills, immediately power off the device and allow it to dry completely before use.
• Magazzinaggio: Conservare i dispositivi in ​​un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.
• Gestione: Avoid dropping or subjecting the devices to strong impacts. Do not attempt to disassemble or modify the devices, as this will void the warranty.

Figure 6.1: Keyboard Underside

This image shows the brushed stainless steel back of the keyboard and the anti-slip silicone pads, indicating durable construction and stable placement.

7. Risoluzione Dei Problemi

If you encounter issues with your Arteck keyboard or mouse, refer to the following common solutions:

8. Specifiche

• Modello: HB192 (Keyboard), MB167 (Mouse)
• Connettività: Bluetooth
• Layout della tastiera: Dimensioni reali
• Keyboard Key Structure: Interruttore a forbice
• Impostazioni DPI del mouse: 800/1200/1600/2000/2400 DPI
• Tipo di batteria: Ricaricabile agli ioni di litio
• Porta di ricarica: USB di tipo C
• Sistema operativo compatibile: Windows, iOS, iPad OS, Android, Mac OS
• Dimensioni (tastiera): Approximately 42.5 x 11.6 x 0.43 cm (16.7 x 4.5 x 0.16 in)
• Peso (tastiera): Circa 514.6 g (18.2 oz)
• Dimensioni (mouse): Approximately 10.7 x 6.9 x 4.1 cm (4.2 x 2.7 x 1.6 in)
• Weight (Mouse): Circa 89 g (3.1 oz)

Figura 8.1: Dimensioni del prodotto

This image provides detailed measurements for both the Arteck keyboard and mouse, including their length, width, height, and weight.

9. Garanzia e supporto

Arteck provides a 2-year warranty for this product. If you encounter any issues or require assistance, please contact Arteck customer service through the retailer where you purchased the product or visit the official Arteck websito per informazioni di supporto.

Conservare la prova d'acquisto per eventuali richieste di garanzia.