Pilipane 50mm Stroke DC 12V Mini Linear Actuator User Manual

1. Introduzione

This manual provides essential information for the safe and effective use of your Pilipane 50mm Stroke DC 12V Mini Linear Actuator. This compact device is designed for various applications requiring linear motion, offering reliable performance with a geared motor, internal limit switches, and low noise operation.

The actuator features a durable aluminum alloy fuselage and powder metallurgy technology for long-lasting use. It is equipped with short circuit protection and is suitable for a wide range of environments.

Figure 1: Pilipane 50mm Stroke DC 12V Mini Linear Actuator

This image shows the Pilipane 50mm Stroke DC 12V Mini Linear Actuator from a top-down perspective. It features a silver-colored aluminum body, a black mounting bracket with multiple screw holes, and red and black wires extending from the top for power connection. A label on the side indicates 'Linear Actuator 12V 50mm 4mm/s 150N'.

2. Informazioni sulla sicurezza

• Scollegare sempre l'alimentazione prima di procedere all'installazione, alla manutenzione o alla risoluzione dei problemi.
• Assicurare il volume di inputtage is 12V DC. Incorrect voltage can damage the actuator.
• Do not exceed the rated load capacity of the actuator.
• Avoid operating the actuator in environments with excessive dust, moisture, or corrosive substances unless specifically designed for such conditions.
• Durante il funzionamento, tenere le mani e gli abiti larghi lontani dalle parti in movimento.
• Ensure proper wiring polarity to control extension and retraction.

3. Prodotto finitoview

The Pilipane Mini Linear Actuator is composed of several key components designed for efficient linear motion.

Figure 2: Labeled Components of the Linear Actuator

This image provides a detailed, labeled view of the linear actuator. Key components identified include the 'Alloy Telescopic Rod' at the top, the 'Limit Switch' indicated on the side of the main body, the main 'Aluminium Alloy Shell' of the actuator, and the 'Linear Actuator' label with specifications (12V 50mm 4mm/s 150N) on the black mounting bracket. The label 'Stop at Will' points to the main body, indicating the actuator's ability to stop at any point within its stroke.

Componenti chiave:

• Alloy Telescopic Rod: The moving part that extends and retracts to provide linear motion.
• Aluminium Alloy Shell: The main body of the actuator, providing durability and protection for internal components.
• Finecorsa: Internal switches that automatically stop the actuator at its fully extended and fully retracted positions, preventing over-travel.
• Staffa di fissaggio: Integrated black bracket with holes for secure installation.
• Cavi di alimentazione: Red and black wires for connecting to a 12V DC power source.

4. Specifiche

5. Configurazione e installazione

5.1 Montaggio

1. Select a stable and secure mounting surface capable of supporting the actuator and its load.
2. Position the actuator using the integrated mounting bracket.
3. Secure the actuator to the surface using appropriate screws or bolts through the holes in the mounting bracket. Ensure the actuator is firmly attached to prevent movement during operation.

5.2 Cablaggio

1. Connect the red wire of the actuator to the positive (+) terminal of a 12V DC power supply.
2. Connect the black wire of the actuator to the negative (-) terminal of the 12V DC power supply.
3. To reverse the direction of motion (retract the rod), reverse the polarity of the power supply (connect red to negative, black to positive).
4. Assicurarsi che tutti i collegamenti siano sicuri e isolati per evitare cortocircuiti.

Figure 3: Actuator Power Wires

This image shows a close-up of the red and black power wires extending from the linear actuator, ready for connection to a 12V DC power source. The wires are stripped at the ends for easy terminal connection.

6. Istruzioni per l'uso

1. Once properly installed and wired, apply 12V DC power to the actuator.
2. The actuator rod will extend or retract depending on the polarity of the applied voltage.
3. The internal limit switches will automatically stop the actuator when it reaches its full extension or retraction point.
4. To stop the actuator at an intermediate position, simply cut the power supply.

7. Manutenzione

• Pulizia: Keep the actuator body and telescopic rod clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Ispezione: Ispezionare periodicamente il cablaggio per individuare eventuali segni di usura, danni o collegamenti allentati.
• Lubrificazione: The internal components are pre-lubricated. Avoid applying external lubricants unless specified by the manufacturer.
• Ambiente: Ensure the operating environment remains within the specified temperature range (0℃ to 40℃) and is free from excessive moisture or corrosive elements.

8. Risoluzione Dei Problemi

• Actuator does not move:
  • Check power supply: Ensure 12V DC is being supplied and connections are secure.
  • Check polarity: Verify correct polarity for desired motion.
  • Overload: Ensure the load does not exceed the actuator's rated capacity.
• Actuator moves intermittently or slowly:
  • Basso volumetage: Controllare se l'alimentatore voltage è stabile a 12 V CC.
  • Excessive friction: Inspect the mounting and load for any binding or excessive friction.
• Rumore insolito durante il funzionamento:
  • Loose mounting: Ensure the actuator is securely mounted.
  • Obstruction: Check for any obstructions in the path of the telescopic rod.

9. Applicazioni

The Pilipane 50mm Stroke DC 12V Mini Linear Actuator is versatile and can be used in a variety of applications, including:

• Elettrodomestici
• Therapeutic equipment
• Sistemi automobilistici
• Macchinari industriali
• Macchinari agricoli
• Catering equipment
• Ventilation facilities

Figure 4: Diverse Applications of Linear Actuators

This image displays a collage of six different applications where linear actuators are commonly used. These include adjustable beds (medical and home), height-adjustable desks, reclining chairs, and lifting platforms, illustrating the versatility of linear motion devices in various settings.

10. Garanzia e supporto

Per informazioni sulla garanzia o assistenza tecnica, fare riferimento alla confezione del prodotto o contattare il rivenditore. Conservare la ricevuta d'acquisto come prova d'acquisto.