1. Introduzione
Thank you for choosing the Dibea H8 Cordless Wet Dry Smart Washer & Vacuum Cleaner. This appliance is designed for efficient cleaning of various hard floor surfaces, combining vacuuming and mopping functions. Please read this manual thoroughly before use to ensure proper operation and maintenance.
2. Contenuto della confezione
Carefully unpack your Dibea H8 and ensure all items listed below are present and in good condition. If any items are missing or damaged, please contact customer support.
- 1 x Dibea H8 Main Body
- 1 x Handheld Handle
- 1 x Dirty Water Tank (DWT)
- 1 x Clean Water Tank (CWT)
- 1 x Roller Brush & HEPA Filter (Pre-installed)
- Base di ricarica 1 x
- 1 x Adattatore
- 1 x Spazzola per la pulizia
- 1 x Cleaning Solution (500ml)
3. Impostazione
3.1 Montaggio
- Insert the handheld handle into the main body until it clicks securely into place.
- Ensure the Clean Water Tank (CWT) and Dirty Water Tank (DWT) are correctly installed.
- Verify that the roller brush and HEPA filter are pre-installed in their respective compartments.
3.2 Ricarica
- Place the Dibea H8 onto the charging base.
- Connect the adaptor to the charging base and plug it into a power outlet.
- Il display LED indicherà lo stato di carica. Una ricarica completa richiede in genere dalle 4 alle 5.5 ore.
3.3 Riempimento del serbatoio dell'acqua pulita
- Remove the Clean Water Tank (CWT) from the main body.
- Open the tank cap and fill with clean tap water. For enhanced cleaning, add a small amount of the provided cleaning solution. Do not exceed the MAX fill line.
- Close the cap securely and re-install the CWT into the main body.
4. Funzionamento dell'apparecchio
The Dibea H8 offers versatile cleaning for various hard surfaces including hardwood, tile, ceramic, and marble. It features a smart LED digital display and voice prompts for real-time information.
4.1 Accensione/Spegnimento
Press the power button on the handle to turn the appliance on or off. The LED display will illuminate upon activation.
4.2 modalità di pulizia
The Dibea H8 features four cleaning modes to suit different cleaning needs:
- Modalità automatica: Automatically adjusts suction power and water flow based on detected dirt levels. Ideal for general cleaning.
- Modalità ad alta potenza: Provides maximum suction (up to 13,000Pa) for stubborn dirt and heavy spills.
- Modalità di aspirazione: Focuses solely on liquid suction, useful for drying wet areas or picking up large liquid spills without scrubbing.
- Modalità autopulente: Initiates an automatic cleaning cycle for the roller brush and internal tubes while the unit is on its charging base.
4.3 Smart LED Digital Display and Voice Prompts
The user-friendly LED display provides real-time information, including the current working mode, battery life, and water tank status. Voice guidance assists with operational instructions and alerts.
4.4 Self-Propelled Design
The Dibea H8 is equipped with a self-propulsion system that reduces the effort required to push the vacuum, making cleaning easier and less strenuous.
4.5 Battery Life and Water Tanks
Powered by a 2,200mAh lithium battery, the appliance offers up to 38 minutes of continuous cleaning in Auto Mode. It features 500ml clean and dirty water tanks, minimizing the need for frequent refills and emptying during cleaning sessions.
5. Manutenzione
Regular maintenance ensures optimal performance and extends the lifespan of your Dibea H8.
5.1 Funzione autopulente
After each use, it is recommended to activate the self-cleaning mode:
- Posizionare l'apparecchio sulla base di ricarica.
- Ensure there is sufficient clean water in the CWT.
- Press the self-cleaning button (often integrated with the High Power mode button) to start the cycle. The appliance will automatically clean the roller brush and internal tubes.
- Once complete, empty the Dirty Water Tank.
5.2 Emptying the Dirty Water Tank (DWT)
- Remove the DWT from the main body.
- Aprire il serbatoio e versare con cautela l'acqua sporca.
- Risciacquare accuratamente il DWT con acqua pulita e lasciarlo asciugare all'aria prima di reinstallarlo.
5.3 Cleaning the Roller Brush and HEPA Filter
- Periodically remove the roller brush and HEPA filter for manual cleaning.
- Use the provided cleaning brush to remove hair and debris from the roller brush. Rinse under running water.
- Tap the HEPA filter gently to dislodge dust. If heavily soiled, rinse under water, ensuring it is completely dry before re-installation to prevent mold growth and maintain suction power.
6. Risoluzione Dei Problemi
If you encounter issues with your Dibea H8, refer to the following common problems and solutions:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Nessuna alimentazione/Non si accende | Batteria scarica; Non carica | Charge the appliance fully. Ensure the adaptor is properly connected. |
| Scarsa aspirazione | Dirty HEPA filter; Blocked roller brush; Full DWT | Clean or replace the HEPA filter. Remove any blockages from the roller brush. Empty and clean the Dirty Water Tank. |
| Acqua non erogata | Empty CWT; Clogged water nozzle | Refill the Clean Water Tank. Check and clear any blockages in the water dispensing nozzle. |
| L'autopulizia non funziona | Insufficient water in CWT; Appliance not on charging base | Ensure the Clean Water Tank is filled. Place the appliance correctly on the charging base. |
| Rumore insolito | Foreign object in brush roll; Damaged components | Turn off and inspect the brush roll for foreign objects. If noise persists, contact customer support. |
7. Specifiche
Detailed technical specifications for the Dibea H8 Cordless Wet Dry Smart Washer & Vacuum Cleaner:
| Caratteristica | Specificazione |
|---|---|
| Peso netto | 3.7 kg |
| Dimensioni | Dimensioni: 1106 x 217 x 270 mm |
| Capacità della batteria | 2,200 mAh |
| Motore | Motore senza spazzole |
| Potenza nominale | 170W |
| Suction Power (Pa) | 13 kPa |
| Running Time (Min) | 38 Mins (Auto Mode) |
| Tempo di ricarica | 4-5.5 ore |
| Livello di rumore | ≤80db |
| Volume di caricatage | 22.2 Volt |
| Tipo di filtro | Filtro HEPA |
| Autopulente | SÌ |
| Capacità del serbatoio dell'acqua sporca | 600 ml |
| Capacità del serbatoio dell'acqua pulita | 500 ml |
| Schermo di visualizzazione | LED On-Screen Display |
| Istruzioni vocali | SÌ |
| Self-Propulsion | SÌ |
| Water Sterilization | NO |
| Modalità di pulizia | Auto / High Power / Self-Cleaning / Suction |
| Raccomandazione di superficie | All hard floors |
| Fonte di alimentazione | Alimentato a batteria |
8. Garanzia e supporto
8.1 Informazioni sulla garanzia
The Dibea H8 comes with a Garanzia del produttore di 2 anni. Please note that specific components, such as the battery, may have a shorter warranty period (e.g., 6 months). Retain your proof of purchase for warranty claims.
8.2 Assistenza clienti
For technical assistance, warranty claims, or spare parts, please contact Dibea customer support through their official website or the retailer where the product was purchased. Provide your model number (H8) and purchase date for efficient service.