1. Introduzione
This manual provides detailed instructions for the assembly, operation, and maintenance of your Barska Winbest Pursuit-200 Metal Detector Field Kit. Please read this manual thoroughly before using the product to ensure proper function and longevity.
The Pursuit-200 Metal Detector Field Kit is designed for detecting various metals and includes a main metal detector with an LCD display, a handheld wand detector, headphones, a folding shovel, and a soft carrying case.
2. Contenuto della confezione
Verifica che tutti gli articoli elencati di seguito siano presenti nel tuo pacco:
- Barska Winbest Pursuit-200 Metal Detector (Main Unit)
- Surveyor-100 Handheld Wand Metal Detector
- Cuffie
- Folding Shovel with Compass
- Custodia morbida
- Manuale dell'utente (questo documento)
Immagine 2.1: All components of the Barska Winbest Pursuit-200 Metal Detector Field Kit, including the main detector, wand detector, headphones, shovel, and carrying case.
3. Impostazione
3.1. Assembling the Main Metal Detector
- Collegare la bobina di ricerca: Secure the search coil to the lower stem using the provided bolt and nut. Ensure it is firmly attached but allows for slight angle adjustment.
- Connect the Lower and Middle Stems: Insert the lower stem into the middle stem and secure it with the spring clip or locking mechanism.
- Attach the Control Housing: Slide the control housing onto the upper stem. Adjust the armrest for comfort and secure the control housing in place.
- Avvolgere il cavo: Carefully wrap the search coil cable around the stem, ensuring it is not too tight or loose, and plug the connector into the control housing.
- Installa le batterie: Open the battery compartment on the control housing and insert the required batteries (refer to specifications for battery type).
Immagine 3.1: The main metal detector fully assembled, showing the search coil, stem, armrest, and control housing.
3.2. Preparing the Wand Detector
The Surveyor-100 Wand Metal Detector typically requires battery installation. Open the battery compartment, insert the correct batteries, and close the compartment securely.
Immagine 3.2: The handheld wand metal detector, showing its compact design and control buttons.
3.3. Preparing the Folding Shovel
Unfold the shovel and secure its locking mechanisms to ensure it is rigid for use. The shovel can be configured as a shovel or a pick. The compass is integrated into the handle.
Immagine 3.3: The multi-use folding shovel, shown in both shovel and pick configurations.
4. Istruzioni per l'uso
4.1. Main Metal Detector Operation
Immagine 4.1: Close-up of the Pursuit-200 metal detector's LCD display and control panel, showing buttons for DISC, NOTCH, SENS, and volume knob.
- Accensione: Turn the VOLUME knob clockwise to power on the detector.
- Adjust Sensitivity (SENS): Press the SENS button and use the '+' and '-' buttons to adjust the sensitivity level. Higher sensitivity increases detection depth but may also increase false signals.
- Discrimination (DISC): Press the DISC button and use '+' and '-' to set the discrimination level. This feature allows the detector to ignore certain types of metal (e.g., iron). The LCD will show the target ID.
- Notch: Use the NOTCH function to selectively eliminate specific metal categories from detection.
- Cuffie: Plug the included headphones into the 'PHONE' jack for private listening and clearer audio signals.
- Spazzare: Tenere il metal detector con la bobina di ricerca parallela al terreno, a circa 1-2 cm dalla superficie. Muovere lentamente la bobina da un lato all'altro, con movimenti ad arco sovrapposti.
- Indicazione del bersaglio: When a metal object is detected, the detector will emit an audible tone, and the LCD display will show a target ID and signal strength.
- Bobina di ricerca impermeabile: The 10-inch search coil is weather-sealed and can be submerged in shallow water for detection. Ensure the control housing is not submerged.
4.2. Wand Detector Operation
Immagine 4.2: A hand holding the Surveyor-100 wand detector, demonstrating its ergonomic design for pinpointing targets.
- Accensione: Press the Power ON/OFF button to activate the wand detector.
- Individuazione: After locating a general area with the main detector, use the wand detector to precisely pinpoint the target's location in the soil.
- Indicazione: The wand detector will typically use audible alerts and/or vibration, along with LED indicators, to signal the presence of metal.
4.3. Shovel Usage
Use the folding shovel to excavate detected targets. Its compact design and pick function are useful for breaking up tough ground. The integrated compass can assist with navigation.
5. Manutenzione
- Pulizia: Wipe down the detector and accessories with a damp panno dopo ogni utilizzo. Evitare detergenti abrasivi.
- Magazzinaggio: Store the kit in the provided soft carrying case in a dry, cool place when not in use.
- Cura della batteria: Remove batteries from both detectors if they will not be used for an extended period to prevent leakage.
- Ispezione dei cavi: Controllare regolarmente il cavo della bobina di ricerca per verificare che non presenti segni di usura o danni.
6. Risoluzione Dei Problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| No power to main detector/wand detector | Batterie scariche o installate in modo errato | Sostituire le batterie con altre nuove, assicurandosi che la polarità sia corretta. |
| Segnali irregolari o falsi positivi | High sensitivity, electromagnetic interference, mineralized ground | Reduce sensitivity. Move away from power lines or other electronic devices. Use discrimination settings. |
| Detector not finding metal | Low sensitivity, incorrect discrimination settings, search coil not parallel to ground | Increase sensitivity. Adjust discrimination settings. Ensure search coil is swept correctly. |
| Nessun suono dalle cuffie | Headphones not plugged in correctly, volume too low, faulty headphones | Ensure headphones are fully plugged in. Increase volume. Test with another pair of headphones if available. |
7. Specifiche
- Modello: Pursuit-200 (BE12748)
- Marca: Barska
- Dimensioni della bobina di ricerca: 10 inches (Waterproof)
- Display: LCD
- Fonte di energia: Alimentato a batteria (batterie richieste: sì)
- Lunghezza regolabile: Yes, up to 47 inches
- Materiale: Metallo
- Peso dell'articolo: Circa 0.4 chilogrammi (14.1 once)
- Dimensioni del prodotto: 10"L x 9.5"W x 48.42"H (assemblato)
- Grado di protezione internazionale: IP541 (per bobina di ricerca)
- Accessori inclusi: Surveyor-100 Wand Detector, Headphones, Folding Shovel with Compass, Soft Carrying Case
8. Informazioni sulla sicurezza
- Prima di effettuare ricerche su proprietà private, ottenere sempre il permesso.
- Be aware of local regulations regarding metal detecting.
- Prestare attenzione durante gli scavi per evitare di danneggiare i servizi sotterranei o i reperti storici.
- Do not use the metal detector near live electrical wires or in hazardous environments.
- Tenere le batterie fuori dalla portata dei bambini e smaltirle correttamente.
9. Garanzia e supporto
For warranty information and customer support, please refer to the official Barska websito o contattare il servizio clienti. Conservare la ricevuta d'acquisto come prova d'acquisto.
Barska Official Websito: www.barska.com