PRITECH Foil and Bald Shaver RSM-1699 User Manual

Introduzione

This manual provides detailed instructions for the safe and effective use of your PRITECH Foil and Bald Shaver RSM-1699. Please read all instructions carefully before first use and retain this manual for future reference.

Informazioni sulla sicurezza

Importante avviso di sicurezza:

• When charging, use a power adapter with an input voltage not higher than 5V 1A to ensure safety and efficiency.
• Mantenere l'apparecchio asciutto. Non immergerlo in acqua.
• Tenere fuori dalla portata dei bambini.
• Do not use if the foil or blades are damaged, as this may cause injury.
• Scollegare il rasoio prima di pulirlo con acqua.

Prodotto finitoview

The PRITECH Foil and Bald Shaver RSM-1699 is a versatile 2-in-1 electric shaver designed for both foil shaving and bald head trimming. It features adjustable speeds and an LED display.

Image: The PRITECH Foil and Bald Shaver RSM-1699, showing the main unit, protective cover, and USB charging cable.

Componenti:

• Testina di rasatura a lamina: For close shaving of facial hair and bald heads.
• Rifinitore a comparsa: For pre-trimming longer hair, sideburns, or detailing.
• Display a LED: Shows motor speed (RPM) and remaining battery percentage.
• Pulsante di accensione: Turns the shaver on/off and activates travel lock.
• Pulsanti di regolazione della velocità (+/-): To increase or decrease motor speed.
• Porta di ricarica USB: For recharging the shaver.
• Copertura protettiva: To protect the foil head when not in use.

Immagine: Un esploso view of the shaver, highlighting the LED display, USB charge port, upgraded double cutting knife tube, ultra-thin cutter head, durable mesh head, and protective cover.

Impostare

Carica iniziale

Before first use, fully charge the shaver for approximately 2 hours. A full charge provides up to 120 minutes of cordless operation.

• Collegare il cavo di ricarica USB alla porta di ricarica del rasoio.
• Connect the other end of the USB cable to a compatible power source (e.g., a 5V/1A USB adapter, laptop, USB outlet, car charger, or power bank).
• Il display LED indicherà lo stato di carica.

Image: Various USB charging options for the shaver, including laptop, USB outlet, USB adapter, car charger, and power bank. It also shows 120 minutes running time after 2 hours of fast charging.

Istruzioni per l'uso

Turning On/Off and Travel Lock

• Per accendere/spegnere: Premere brevemente il pulsante di accensione.
• Per attivare il blocco da viaggio: Press and hold the power button for three seconds. A lock icon will appear on the LED display.
• Per disattivare il blocco da viaggio: Press and hold the power button for three seconds. The display will count down from 3 to 1, then the shaver will unlock and turn on.

Image: Illustration of how to activate and deactivate the intelligent travel lock by holding the power button for 3 seconds, with a countdown shown on the LED display.

Regolazione della velocità

The shaver offers 3 adjustable speeds (6500RPM, 7000RPM, 7500RPM) to suit different hair thicknesses and lengths.

• Premere il tasto '+' button to increase the motor speed.
• Premere il tasto '-' button to decrease the motor speed.
• La velocità attuale verrà visualizzata sullo schermo LED.

Image: Close-up of the shaver's LED display showing motor speed (RPM) and remaining power percentage, along with the '+' and '-' buttons for speed adjustment.

Procedura di rasatura

1. Pre-trimming (for longer hair): If your hair or beard is long, first use the pop-up trimmer to shorten it. Slide the pop-up trimmer switch upwards to engage it.
2. Foil Shaving: For a close shave, use the main foil shaver head. Move the shaver gently against the direction of hair growth, ensuring the foil makes full contact with your skin.
3. Contorno: The independently floating blades adapt to facial contours for a thorough shave.

Image: A visual guide demonstrating the steps for using the shaver for a bald head, including opening the pop-up trimmer, trimming side hair, trimming top hair, and using the foil head for the final shave.

Immagine: dettagliata view of the pop-up trimmer and the foil shaver head, highlighting the double floating cutter head, geometric pattern grid, and 0.02mm ultra-thin knife net for a close shave.

Manutenzione

Pulizia del rasoio

Una pulizia regolare garantisce prestazioni e igiene ottimali.

1. Remove Foil Net: Press the button on the right side of the shaver to easily detach the foil net.
2. Pulizia con pennello: Utilizzare la spazzola di pulizia in dotazione per rimuovere i peli morti dalle lame e all'interno della testina del rasoio.
3. Risciacquo: The shaver head is washable. Rinse the detached foil net and blades under running water. Ensure the main body is not immersed.
4. Asciutto: Lasciare asciugare completamente tutte le parti all'aria prima di rimontarle.

Image: A sequence of images demonstrating how to clean the shaver, including pressing a button to remove the foil head, brushing the blades, and rinsing the head under water.

Sostituzione della lama e della lamina

For continued optimal performance, it is recommended to replace the foil and blades periodically, typically every 12-18 months, depending on usage. Replacement parts can be purchased separately from authorized PRITECH retailers.

Risoluzione dei problemi

• Il rasoio non si accende: Check if the battery is charged. Ensure the travel lock is deactivated.
• Scarse prestazioni di rasatura: Clean the shaver head and blades. Consider replacing the foil and blades if they are old or damaged. Ensure the shaver is fully charged.
• Problemi di ricarica: Verify the USB cable and power adapter are working correctly and meet the 5V/1A specification.

Specifiche

Assistenza clienti

Your satisfaction is important to us. If you encounter any issues or have questions regarding your PRITECH Foil and Bald Shaver, please contact our customer support team for assistance. We are committed to providing 100% satisfaction.