Prodotto finitoview
The SHW 51x59 Inch L-Shaped Home Office Desk in Maple is designed to optimize your workspace with its spacious L-shaped layout. It features integrated box and file drawers for organized storage and includes cable management grommets for a tidy setup. Constructed from engineered wood with a laminated finish, this desk offers both durability and a professional appearance.
Figure 1: SHW L-Shaped Home Office Desk in Maple
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Marca | SSB |
| Dimensioni del prodotto | 51"P x 59"L x 28"A |
| Colore | Acero |
| Stile | Moderno |
| Materiale di base | Legno ingegnerizzato |
| Tipo di finitura | Wood, Laminated |
| Peso dell'articolo | 28.3 chilogrammi |
| Numero di cassetti | 3 (Two box, one file) |
| Assemblaggio richiesto | SÌ |
Figura 2: Dimensioni del prodotto
Contenuto della confezione
Verificare che tutti i componenti siano presenti prima di iniziare il montaggio. Se qualche componente risulta mancante o danneggiato, contattare l'assistenza clienti.
- Pannelli del desktop (sinistro, destro, angolo)
- Side Panels and Support Beams
- Drawer Unit Components (Drawer fronts, sides, bottoms, glides)
- Hardware Pack (Screws, dowels, cam locks, handles)
- Passacavi per la gestione dei cavi
- Assembly Tools (Hex key, etc.)
Istruzioni di montaggio
Prima di iniziare
- Predisporre un'area spaziosa per l'assemblea.
- Review all instructions and identify all parts.
- Si consigliano due persone per il montaggio.
- Utilizzare un panno morbido o del cartone per proteggere le superfici durante il montaggio.
Montaggio passo dopo passo
Step 1: Assemble the Main Desktop Panels
Connect the left, right, and corner desktop panels using the provided hardware. Ensure all connections are secure and flush.
Figure 3: Assembling desktop panels
Step 2: Attach Support Beams and Side Panels
Secure the support beams and side panels to the underside of the desktop. This provides stability and forms the desk's structure.
Figure 4: Attaching support structure
Step 3: Install Drawer Unit
Assemble the drawer unit according to the detailed diagrams. Install the drawer glides and then insert the assembled drawers into the unit. Attach the handles to each drawer front.
Figure 5: Drawer unit assembly
Fase 4: Assemblaggio finale e posizionamento
Attach the completed drawer unit to the main desk structure. Carefully move the assembled desk to its desired corner location. Ensure the desk is level and stable.
Figure 6: Completed desk in an office setting
Istruzioni per l'uso
Gestione dei cavi
The desk is equipped with two pre-installed grommet holes on the desktop. Use these to route power cords, display cables, and other wires to maintain a clean and organized workspace. This helps prevent cable clutter and potential tripping hazards.
Figure 7: Cable management grommet
Utilizzo del cassetto
The integrated drawer unit includes two smaller box drawers for office supplies and one larger file drawer designed to accommodate letter-size hanging files. Ensure drawers are not overloaded to allow for smooth operation.
Figure 8: Integrated drawers
Figura 9: File drawer detail
Manutenzione
- Pulizia: Pulire le superfici con un panno morbido, damp stoffa. Evitare detergenti abrasivi o prodotti chimici aggressivi che potrebbero danneggiare la finitura.
- Fuoriuscite: Pulire immediatamente eventuali fuoriuscite per evitare macchie o danni alla finitura del legno.
- Elementi di fissaggio: Controllare periodicamente tutte le viti e gli elementi di fissaggio per assicurarsi che siano ben serrati. Serrare nuovamente se necessario per mantenere la stabilità.
- Distribuzione del peso: Distribute weight evenly across the desktop to prevent warping or stress on the structure.
Risoluzione dei problemi
- Scrivania traballante: Ensure all assembly hardware is securely tightened. Check that the desk is placed on a level surface. Adjust leg levelers if applicable (not specified for this model, but a general tip).
- I cassetti non si chiudono facilmente: Verify that the drawer glides are correctly installed and free of obstructions. Ensure drawers are not overloaded.
- Parti danneggiate: If any parts arrived damaged or become damaged during assembly, contact customer support for replacements.
Garanzia e supporto
For warranty information, product support, or to order replacement parts, please refer to the documentation included with your purchase or visit the official SHW brand store online. Keep your purchase receipt for warranty claims.
SHW Brand Store: Visit the SHW Store on Amazon