1. Importanti istruzioni di sicurezza
Read and understand all safety warnings and instructions before operating this electric hoist. Failure to follow these instructions may result in electric shock, fire, serious injury, or property damage. Keep this manual for future reference.
1.1 Sicurezza generale
- Indossare sempre dispositivi di protezione individuale (DPI) adeguati, tra cui occhiali di sicurezza, guanti e calzature robuste.
- Ensure the work area is clear of obstructions, well-lit, and free from unauthorized personnel.
- Non utilizzare il paranco sotto l'effetto di droghe, alcol o medicinali.
- Inspect the hoist for damage before each use. Do not operate if damaged.
- Keep hands and body clear of moving parts and the load during operation.
1.2 Sicurezza elettrica
- Connect the hoist only to a properly grounded power outlet with the specified voltage (220 V).
- Do not expose the hoist to rain or wet conditions.
- Non utilizzare mai il cavo di alimentazione per trasportare, tirare o scollegare il paranco.
- Assicurarsi che tutti i collegamenti elettrici siano sicuri e privi di danni.
1.3 Sicurezza del sollevamento
- Never exceed the rated load capacity of the hoist (125 kg for single cable, 250 kg for double cable).
- Ensure the load is properly balanced and securely attached to the hook.
- Do not lift people or objects over people.
- Evitare partenze o arresti improvvisi durante il sollevamento o l'abbassamento di un carico.
- Use the emergency stop switch immediately if an unsafe condition occurs.
2. Prodotto finitoview
The VEVOR Electric Wire Rope Hoist PAYX250-2 is designed for lifting heavy objects in various environments such as garages, warehouses, and factories. It features a robust pure copper motor, a durable steel wire rope, and a wired remote control for safe operation.
Figura 2.1: Principale view of the VEVOR Electric Wire Rope Hoist, highlighting its compact design and robust construction.
Figure 2.2: The electric hoist installed in a typical garage environment, demonstrating its application for lifting tasks.
2.1 componenti chiave
- Motore: Pure copper motor with a cooling fan for efficient and prolonged operation.
- Fune: Durable braided steel cable (Φ 3 mm * L 12 m, 19 strands).
- Gancio: Alloy steel hook for secure load attachment. Includes a double hook for increased capacity.
- Telecomando: Wired remote with a 4m cable for safe operation from a distance, featuring an emergency stop button.
- Staffe di montaggio: Two channel mounting brackets for easy installation.
- Caratteristiche di sicurezza: Emergency stop switch and electromagnetic braking system to prevent accidental slippage and overturning.
3. Impostazione
Proper installation is crucial for safe and effective operation of the hoist.
3.1 Montaggio del paranco
- Select a sturdy overhead beam or crossbar capable of supporting the hoist's weight and the maximum intended load.
- Attach the two provided channel mounting brackets to the hoist.
- Securely mount the hoist to the chosen overhead structure using appropriate fasteners. Ensure the brackets are tightly fastened to prevent movement during operation.
Figure 3.1: Illustration of the metal adjustable fixing rings (mounting brackets) and their dimensions for secure installation.
3.2 Collegamento elettrico
- Ensure the power supply matches the hoist's voltage requisito (220V).
- Plug the hoist into a grounded electrical outlet. Avoid using extension cords if possible; if necessary, use a heavy-duty, grounded extension cord rated for the hoist's power requirements.
3.3 Cable Configuration (Single vs. Double Line)
The hoist can be configured for single or double line lifting, affecting its capacity and lifting speed.
- Single Cable: Provides higher lifting height and speed (40 ft/12 m, 33 ft/min) with a capacity of 125 kg.
- Double Cable: Achieved by using the provided pulley hook, which doubles the lifting capacity to 250 kg but halves the lifting height and speed (19.7 ft/6 m, 16 ft/min).
Figure 3.2: Comparison of single cable setup (left) for higher speed and height, and double cable setup (right) using a pulley hook for increased lifting capacity.
4. Istruzioni per l'uso
Per un funzionamento sicuro ed efficace del vostro paranco elettrico, seguite questi passaggi.
4.1 Utilizzo del telecomando
The hoist is operated via a wired remote control, allowing you to maintain a safe distance from the load.
Figure 4.1: The multi-functional remote control handle with its 14ft (approx. 4m) cable, featuring an emergency stop button.
- Pulsante su: Premere e tenere premuto per sollevare il carico.
- Pulsante Giù: Premere e tenere premuto per abbassare il carico.
- Pulsante di arresto di emergenza: Press the large red button to immediately stop all hoist operations in an emergency. Twist to reset.
- Always operate the hoist from a position where you have a clear view of the load and the surrounding area.
4.2 Lifting Procedures
- Before lifting, ensure the load is within the hoist's capacity and is securely attached to the hook.
- Slowly lift the load a few inches off the ground to check for balance and stability.
- If the load is stable, proceed to lift it to the desired height. Avoid swinging the load.
- When lowering, do so slowly and steadily. Guide the load if necessary, keeping hands clear.
- Non lasciare mai un carico sospeso incustodito.
5. Manutenzione
Una manutenzione regolare garantisce la longevità e il funzionamento sicuro del vostro paranco.
5.1 Ispezione regolare
- Fune: Inspect the wire rope for kinks, fraying, corrosion, or broken strands before each use. Replace if any damage is observed.
- Gancio: Controllare che il gancio non presenti deformazioni, crepe o usura eccessiva. Assicurarsi che il fermo di sicurezza funzioni correttamente.
- Motore e alloggiamento: Inspect for any visible damage, loose fasteners, or unusual noises during operation.
- Electrical Cable and Remote: Check for cuts, abrasions, or damage to the power cord and remote control cable.
5.2 Pulizia e conservazione
- Keep the hoist clean and free from dirt, dust, and debris. Use a dry cloth to wipe down surfaces.
- Store the hoist in a dry, clean, and secure location away from moisture and extreme temperatures.
6. Risoluzione Dei Problemi
Fare riferimento a questa sezione per problemi comuni e le loro possibili soluzioni.
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Il paranco non funziona | Nessuna alimentazione Arresto di emergenza attivato Protezione da sovraccarico motore attivata | Controllare il collegamento e la presa di alimentazione Rilasciare il pulsante di arresto di emergenza Allow motor to cool down, reduce load |
| Rumore insolito durante il funzionamento | Componenti sciolti Mancanza di lubrificazione Danno interno | Inspect for loose parts and tighten Consultare un tecnico qualificato Discontinue use and seek professional service |
| Load slips or drops | Malfunzionamento del freno Sovraccarico | Discontinue use immediately and contact service Ensure load is within capacity |
If you encounter problems not listed here or if the suggested solutions do not resolve the issue, contact VEVOR customer support.
7. Specifiche
Technical data for the VEVOR Electric Wire Rope Hoist PAYX250-2.
Figure 7.1: Detailed product dimensions and a summary of key specifications.
| Parametro | Valore |
|---|---|
| Numero di modello | PAYX250-2 |
| Lifting Load Capacity (Single Cable) | 125 kg (275 libbre) |
| Lifting Load Capacity (Double Cable) | 250 kg (550 libbre) |
| Lifting Height (Single Cable) | 12 metri (40 piedi) |
| Lifting Height (Double Cable) | 6 metri (19.7 piedi) |
| Lifting Speed (Single Cable) | 10 m/min (33 piedi/min) |
| Lifting Speed (Double Cable) | 5 m/min (16 piedi/min) |
| Potenza del motore | 510 L |
| Voltage | 220 Volt |
| Dimensioni del cavo | Φ 3 mm * L 12 m (19 strands) |
| Dimensioni del prodotto (L x P x A) | 350 x 135 x 160 mm (13.8 x 5.3 x 6.3 pollici) |
| Peso del prodotto | 10.35 kg (22.82 libbre) |
| Modalità di controllo | Controllo remoto cablato |
| Velocità di rotazione nominale | 2800 giri al minuto |
| Coppia nominale | 1.1 Nm |
Figure 7.2: Diagram illustrating the internal motor components and the cooling fan designed for heat dissipation.
8. Garanzia e supporto
I prodotti VEVOR sono progettati per garantire durata e prestazioni elevate. Per informazioni sulla garanzia, supporto tecnico o richieste di assistenza, consultare la scheda di garanzia inclusa con il prodotto o visitare il sito ufficiale VEVOR. websito. Conserva la ricevuta d'acquisto come prova d'acquisto.
