keepLiNK 5 Port Industrial

keepLiNK 5-Port Industrial Unmanaged Ethernet Switch 10/100Mbps

Model: 5 Port Industrial

1. Introduzione

This user manual provides comprehensive instructions for the installation, operation, and maintenance of your keepLiNK 5-Port Industrial Unmanaged Ethernet Switch. This device is designed for reliable network connectivity in harsh industrial environments, offering robust performance and ease of use.

2. Prodotto finitoview

2.1 Caratteristiche principali

  • 5 x 10/100Mbps Fast Ethernet Ports.
  • 1Gbps Switching Capacity.
  • IP40 Rated Protection: Resistant to dust and solid objects larger than 1mm.
  • Anti-vibration and Anti-static Interference design.
  • 4KV Lightning Protection.
  • Wide Operating Temperature Range: -30°C to 75°C (-22°F to 167°F).
  • Dual Power Inputs (DC12V-58V) for redundant power with overload current protection.
  • DIN-Rail Mountable for easy installation.
  • Durable Aluminum Housing.

2.2 Contenuto della confezione

  • Switch Ethernet industriale x 1
  • Manuale del prodotto x 1

Note: The power supply for this DIN-rail Ethernet Switch is sold separately.

2.3 Prodotto View

Davanti view of the keepLiNK 5-Port Industrial Ethernet Switch showing the five RJ45 ports and power indicator LEDs.
Figura 1: Fronte view of the keepLiNK 5-Port Industrial Ethernet Switch. This image displays the five 10/100Mbps Ethernet ports, labeled 1 through 5, along with the P1 and P2 power indicator LEDs. The device features a robust black aluminum housing.
Lato view of the keepLiNK 5-Port Industrial Ethernet Switch showing dimensions and IP40 rating.
Figura 2: lato view of the keepLiNK 5-Port Industrial Ethernet Switch. This image highlights the compact dimensions of the switch (3.74 inches length, 3.58 inches width, 1.22 inches height) and mentions its IP40 protection level and aluminum housing.

3. Impostazione

3.1 Collegamento di alimentazione

The switch supports dual redundant power inputs (PWR1 and PWR2) with a DC voltage range of 12V to 58V. Connect your external power supply to the terminal block on the side of the switch. Ensure correct polarity (P1+ and P1- for PWR1, P2+ and P2- for PWR2). The power supply is not included and must be purchased separately.

Posteriore view of the keepLiNK 5-Port Industrial Ethernet Switch showing power input terminals.
Figura 3: Posteriore view of the keepLiNK 5-Port Industrial Ethernet Switch. This image shows the power input terminal block, labeled PWR1/PWR2: DC12V-58V, and the enclosure grounding screw. The terminal block allows for dual redundant power connections.

3.2 Connessione di rete

Connect your Ethernet devices (e.g., computers, cameras, routers) to any of the five 10/100Mbps RJ45 ports using standard Ethernet cables. The switch is unmanaged, meaning no configuration is required for basic network operation.

3.3 Montaggio su guida DIN

The switch is designed for easy installation on a standard DIN-rail. Simply attach the integrated clip on the back of the switch to the DIN-rail until it clicks securely into place.

Image showing the keepLiNK 5-Port Industrial Ethernet Switch mounted on a DIN-rail.
Figure 4: The keepLiNK 5-Port Industrial Ethernet Switch mounted on a DIN-rail. This image demonstrates the secure attachment mechanism for industrial panel installations.

4. Istruzioni per l'uso

4.1 indicatori di alimentazione

  • LED P1/P2: These indicators illuminate when power is supplied to the corresponding PWR1 or PWR2 input. If both are lit, both power sources are active.

4.2 Ethernet Port Indicators

  • Each Ethernet port has two LEDs: a yellow/orange light and a green light.
  • Yellow/Orange & Green Light ON: Indica una connessione a 100 Mbps.
  • Solo luce verde accesa: Indica una connessione a 10 Mbps.
  • Luci lampeggianti: Indica l'attività dei dati sulla porta.
Diagram explaining LED indicators on the keepLiNK 5-Port Industrial Ethernet Switch.
Figure 5: Diagram illustrating the LED indicators on the keepLiNK 5-Port Industrial Ethernet Switch. This image clarifies that both yellow/orange and green lights indicate a 100Mbps connection, while only the green light indicates a 10Mbps connection.

4.3 Unmanaged Operation

The keepLiNK Industrial Ethernet Switch is an unmanaged device. This means it operates automatically without requiring any software configuration. Simply connect your devices, and the switch will handle data forwarding.

5. Manutenzione

To ensure optimal performance and longevity of your industrial Ethernet switch, follow these maintenance guidelines:

  • Pulizia: Pulire periodicamente l'esterno dell'interruttore con un panno morbido e asciutto. Non utilizzare detergenti liquidi o spray.
  • Condizioni ambientali: Ensure the switch operates within its specified temperature range of -30°C to 75°C (-22°F to 167°F). While IP40 rated, avoid exposing the device to excessive moisture or direct water spray.
  • Gestione dei cavi: Keep network cables organized and free from kinks or excessive tension to prevent damage and ensure reliable connections.
  • Controllo dell'alimentazione: Regularly inspect power connections for secure fit and any signs of wear or damage.

6. Risoluzione Dei Problemi

Se riscontri problemi con lo switch Ethernet industriale keepLiNK, fai riferimento ai seguenti passaggi comuni per la risoluzione dei problemi:

  • Nessun potere: Check if the power supply is correctly connected and providing the required DC12V-58V. Verify that the P1/P2 LEDs on the switch are illuminated.
  • Nessun collegamento sulla porta: Ensure the Ethernet cable is securely connected to both the switch port and the connected device. Check the cable for damage. Verify the connected device is powered on and functioning correctly.
  • Velocità di connessione lenta: Observe the port LEDs. If only the green light is on, the connection is 10Mbps. If both yellow/orange and green lights are on, it's 100Mbps. Ensure your connected device supports 100Mbps and that the cable is not faulty.
  • Connettività intermittente: Check for loose cable connections. Ensure the operating environment is within the specified temperature range and free from excessive electromagnetic interference.

7. Specifiche

CaratteristicaDescrizione
Numero di modello5 Port Industrial
Porte Ethernet5 x RJ45 10/100Mbps
Capacità di commutazione1 Gbps
Velocità di trasferimento dati100 Megabyte al secondo
Potenza in ingressoDC 12V-58V (Dual Redundant)
Grado di protezioneGrado di protezione IP40
Temperatura di esercizio-30°C a 75°C (-22°F a 167°F)
Materiale della cassaAlluminio
Dimensioni del prodotto3.74 cm L x 3.58 cm P x 1.22 cm A
Peso dell'articolo0.3 chilogrammi (10.6 once)
MontaggioDIN-Rail

8. Informazioni aggiuntive

8.1 Video del prodotto

Video 1: Un overview of the keepLiNK 5-Port Industrial Ethernet Switch, showcasing its design and features. This video provides a visual demonstration of the product.

9. Garanzia e supporto

keepLiNK is committed to providing high-quality products and customer satisfaction. While specific warranty details are not provided in this document, we offer 24/7 customer service to assist you with any questions or concerns regarding your network switch. Please contact us for support, and we will provide a satisfactory solution within 24 hours.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.