QttyElok F20tuya Kit Bluetooth Tuya Door Access Control System User Manual

1. Introduzione

This manual provides detailed instructions for the installation, operation, and maintenance of your QttyElok F20tuya Kit Bluetooth Tuya Door Access Control System. This system offers multiple secure access methods including Bluetooth Tuya APP, NFC, fingerprint, RFID card, and password. It is designed for reliable performance in various environments.

1.1 Contenuto della confezione

• Access Control Keypad (IP68 Waterproof)
• Unità di alimentazione (DC12V)
• Pulsante di uscita dalla porta
• 10 x RFID Keyfobs
• Hardware di montaggio (viti, tasselli)
• Cablaggio elettrico

2. Caratteristiche del prodotto

• Metodi di accesso multipli: Supports Tuya APP, Mobile phone NFC, Fingerprint, RFID Card, and Password.
• Elevata capacità utente: Memorizza fino a 100 utenti.
• Design durevole: Made of high-quality plastic with a touch screen panel.
• Resistente alle intemperie: Grado di impermeabilità IP68 per uso esterno.
• Campanello integrato: Features a doorbell button for connection to a wired doorbell.
• Retroilluminazione: Keypad includes a backlight for visibility in low-light conditions.
• Query di registrazione: Supports 10,000 record queries for access logs.
• Connettività Bluetooth: Allows remote control and management via Tuya APP.

Image: The access control keypad displaying its key features including Tuya app compatibility, Bluetooth, IP68 waterproof rating, and NFC support.

Image: The access control keypad shown under simulated rain, illustrating its IP68 waterproof capability for outdoor installation.

3. Specifiche

4. Configurazione e installazione

4.1 Schema elettrico

Carefully follow the wiring diagram below to connect the access controller, power supply, and exit button. Ensure all connections are secure and correct before applying power. This kit does not include an electric lock, which must be purchased separately and integrated according to its specific wiring requirements.

Image: A detailed wiring diagram illustrating how to connect the access control keypad, the DC12V power supply, and the door exit button. The diagram shows color-coded wires for GND, 12V, NO/PUSH, COM, NC, BET, D0, D1, and BELL connections.

4.2 Configurazione dell'APP Tuya

The QttyElok F20tuya Kit integrates with the Tuya Smart APP for convenient management and remote unlocking. Follow these steps to set up the app:

1. Download the Tuya Smart APP from your smartphone's app store or by scanning the QR code provided in the product packaging. You can also visit smart.tuya.com/download.
2. Registrati o accedi al tuo account Tuya Smart.
3. Assicurati che il Bluetooth sia abilitato sul tuo smartphone.
4. Open the Tuya Smart APP and click "Add Device" or the "+" icon.
5. The app should automatically discover the access control keypad (FB61). Click "Add" to pair.
6. Una volta aggiunto, clicca su "Fine".
7. You can change the lock language to English within the app settings.

Image: A smartphone screen showing the Tuya Smart app interface, indicating a successful Bluetooth connection to the access control keypad for remote management.

4.3 Guida video all'installazione

For a visual guide on the installation and initial setup, please refer to the official operation video below:

5. Funzionamento

5.1 Adding Users (Fingerprint, Password, RFID Card)

To add new users, navigate to the "Family" section within the Tuya Smart APP. From there, you can add administrators and ordinary members, assigning them different access credentials.

• Aggiunta dell'impronta digitale: Click "Fingerprint Add" in the app. Follow the on-screen prompts to place and remove your finger on the keypad's fingerprint recognition area several times until successfully registered.
• Adding Password: Click "Password Add" in the app. Enter a 6-digit code and save it. You can also generate a random password.
• Aggiunta della scheda RFID: Click "Card Add" in the app. Swipe the RFID keyfob on the access control keypad's card recognition area within the specified time. Click "OK" in the app once added.

Image: A composite image demonstrating various methods to unlock the door, including fingerprint scan, RFID card tap, NFC via smartphone, manual password entry on the keypad, and unlocking through the Tuya app interface.

5.2 Metodi di sblocco

• Sblocco tramite impronta digitale: Place your registered finger on the fingerprint sensor. The lock will open if recognized.
• Sblocco password: Enter your registered 6-digit password on the keypad, then press the 'OK' button.
• Sblocco della carta RFID: Swipe your registered RFID keyfob over the card recognition area on the keypad.
• Sblocco APP Tuya: Open the Tuya Smart APP, select your device, and press the "Unlock" icon. You can also set temporary or periodic passwords through the app.
• Sblocco NFC: Tap your NFC-enabled smartphone (with the Tuya app configured) on the keypad's NFC recognition area.

5.3 ViewRegistrazione degli accessi

The Tuya Smart APP allows you to view a detailed log of all unlocking events, including the method used (fingerprint, password, card, Bluetooth) and the time. This feature helps monitor access to your premises.

Image: The Tuya Smart app interface showing options for temporary password sharing, managing user settings, adding new users (fingerprint, code, card), and viewing a log of access records.

6. Manutenzione

• Pulizia: Utilizzare un morbido, damp cloth to clean the keypad surface. Avoid abrasive cleaners or solvents that could damage the finish or electronic components.
• Grado di impermeabilità: The keypad is IP68 rated, meaning it is protected against dust and can withstand immersion in water up to 1.5 meters for 30 minutes. However, avoid prolonged submersion or high-pressure water jets.
• Controlli regolari: Periodically check all wiring connections for tightness and signs of wear. Ensure the power supply unit is in a dry, protected location.
• Aggiornamenti software: Keep your Tuya Smart APP updated to ensure optimal performance and access to the latest features and security enhancements.

7. Risoluzione Dei Problemi

• La tastiera non risponde: Check the power supply connections. Ensure the unit is receiving power.
• Fingerprint/Card/Password Not Recognized: Ensure the fingerprint is placed correctly, the card is swiped properly, or the password is entered accurately. Re-register the credential if issues persist.
• Problemi di connettività dell'APP Tuya: Ensure Bluetooth is enabled on your phone and the keypad is within range. Restart the app or re-pair the device if necessary.
• Blocco non sbloccato: Verify all wiring connections, especially to the electric lock (if installed). Check the power supply output.
• No Access Records in App: Ensure the keypad is properly connected to the Tuya app and has a stable Bluetooth connection.

If you encounter persistent issues, refer to the detailed troubleshooting section within the Tuya Smart APP or contact customer support.

8. Garanzia e supporto

This product comes with a standard manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or contact QttyElok customer support. For technical assistance, troubleshooting, or replacement parts, please reach out to the seller or manufacturer directly.