Barska AX13744 2.02 Cu Ft Fireproof Biometric Safe Instruction Manual

1. Introduzione

This manual provides essential information for the safe and efficient operation of your Barska AX13744 2.02 Cu Ft Fireproof Biometric Safe. Please read these instructions carefully before installation and use. The safe is designed to provide high security for your valuables with thick steel construction, fire protection, and multiple access options.

Figura 1: Fronte view of the Barska AX13744 Biometric Safe.

2. Informazioni sulla sicurezza

• Conservare sempre le chiavi di emergenza in un luogo sicuro, lontano dalla cassaforte. Non conservarle all'interno della cassaforte.
• Assicurarsi che la cassaforte sia montata saldamente per impedirne la rimozione non autorizzata.
• Do not expose the safe to extreme temperatures or humidity beyond its specified operating conditions.
• Regularly check battery levels to ensure proper function of the electronic lock.
• Tenere la porta della cassaforte chiusa e bloccata quando non la si utilizza.

3. Contenuto della confezione

Verifica che tutti gli articoli elencati di seguito siano inclusi nel tuo pacchetto:

• Barska AX13744 Safe Unit
• 2 Adjustable Shelves with Shelf Brackets
• 4 batterie AA
• Mounting Hardware (bolts, anchors)
• Set of Emergency Back-Up Keys (2 keys)

Figura 2: Componenti inclusi e dimensioni del prodotto.

4. Impostazione

4.1. Installazione della batteria

1. Individuare il vano batterie all'interno dello sportello della cassaforte.
2. Insert the 4 AA batteries (included) according to the polarity indicators (+/-).
3. Chiudere saldamente il coperchio del vano batterie.

4.2. Initial Access and Opening

Upon first use, open the safe using the emergency keys:

1. Individuare il copriserratura sulla tastiera elettronica.
2. Rimuovere il coperchio per scoprire la serratura.
3. Insert one of the emergency keys and turn it clockwise while simultaneously turning the handle to open the safe door.
4. Once open, you can proceed with programming fingerprints and PIN codes.

4.3. Montaggio della cassaforte

The safe is designed for floor mounting to enhance security. Use the provided mounting hardware.

1. Choose a suitable location for the safe, ensuring a stable surface.
2. Mark the pre-drilled mounting points on the floor through the safe's base.
3. Drill pilot holes into the floor at the marked locations.
4. Position the safe over the holes and secure it using the provided bolts and anchors.
5. Assicurarsi che la cassaforte sia fissata saldamente e non oscilli.

Figura 3: Interno view of the safe with adjustable shelves.

5. Istruzioni per l'uso

5.1. Biometric Fingerprint Access

The safe can store up to 160 distinct fingerprints.

1. To program a fingerprint, press the programming button located inside the safe.
2. Place your finger on the biometric scanner. The indicator light will confirm successful scanning.
3. Repeat the scan multiple times for better accuracy.
4. To open the safe, place a registered finger on the scanner. Once recognized, turn the handle to open.

5.2. Keypad PIN Code Access

The safe supports up to 2 unique PIN codes.

1. To program a PIN code, press the programming button inside the safe.
2. Enter your desired PIN code (4-8 digits) on the keypad, followed by the '#' key.
3. Repeat the process to confirm the PIN code.
4. To open the safe, enter your programmed PIN code followed by '#'. Once confirmed, turn the handle to open.

5.3. Accesso con chiave di emergenza

In case of battery failure or forgotten codes, use the emergency keys as described in Section 4.2.

Figure 4: Emergency access using a 9V battery (not included).

5.4. Sistema d'allarme

• Motion Sensor Alarm: The safe features a programmable motion sensor alarm that will activate if the safe is disturbed.
• Modalità di blocco: The safe will enter a lockout mode after 3 incorrect PIN codes or 5 unsuccessful fingerprint scans.
• Programmable Silent Access Mode: This mode allows for discreet entry without audible feedback. Refer to the full manual for programming details.

5.5. Luce LED interna

The safe is equipped with an internal LED light that illuminates the interior when the door is opened, improving visibility of contents.

5.6. Ripiani regolabili

The two included shelves can be adjusted to different heights to accommodate various item sizes. Simply remove the shelf brackets, reposition them to the desired height, and reinsert the shelves.

6. Manutenzione

• Pulizia: Pulisci l'esterno della cassaforte con un panno morbido eamp panno. Evitare detergenti abrasivi o solventi.
• Sostituzione della batteria: Replace the AA batteries annually or when the low battery warning indicator appears. Use high-quality alkaline batteries.
• Meccanismo di blocco: Do not lubricate the lock mechanism. If the lock becomes stiff, contact customer support.

7. Risoluzione Dei Problemi

8. Specifiche

Figure 5: Fire resistance features of the safe.

9. Garanzia e supporto

Per informazioni sulla garanzia, fare riferimento al sito ufficiale del produttore website or contact Barska customer support directly. Replacement parts or accessories can also be requested through their websito.

Domande frequenti:

• Are replacement parts or accessories available for this product if needed? Si prega di visitare il nostro website to request keys or replacement parts.