EDUCIRO Impossible Pirate Bottle Building Blocks con luce LED Manuale di istruzioni

1. Introduzione

Thank you for choosing the EDUCIRO Impossible Pirate Bottle Building Blocks set. This manual provides comprehensive instructions for assembling your 924-piece model, integrating the LED light kit, and maintaining your finished display piece. Please read all instructions carefully before beginning assembly.

Figure 1: The EDUCIRO Impossible Pirate Bottle Building Blocks set, including the product box and the fully assembled model with its display stand.

2. Contenuto della confezione

Verificare che tutti i componenti siano presenti prima di iniziare il montaggio. La confezione deve contenere:

• 924 building block pieces, sorted into numbered bags.
• Manuale di istruzioni.
• LED light kit with battery box (batteries not included).
• Brick separator tool.
• Sticker sheet for detailing.

Figura 2: Oltreview of key components, including the pirate ship, treasure chest, and the base structure for the bottle.

3. Informazioni sulla sicurezza

ATTENZIONE: PERICOLO DI SOFFOCAMENTO - Piccole parti. Non adatto a bambini di età inferiore a 3 anni.

This building set contains small pieces that may pose a choking hazard. Adult supervision is recommended, especially for younger builders. The recommended age for this set is 8 years and older.

4. Istruzioni di montaggio

Suggerimenti generali:

• Prima di iniziare, organizza i pezzi in base al colore e alla forma.
• Follow the numbered bags and steps in the instruction booklet.
• Use the included brick separator tool for easier disassembly if needed.

assemblaggio finitoview Video:

Detailed Assembly Steps:

1. Building the Pirate Ship: Begin by assembling the core structure of the pirate ship using the pieces from the designated bags. Pay close attention to the mast and sail attachments.


Figure 3: The pirate ship component, ready for placement inside the bottle.

2. Assembling the Bottle Structure: Construct the transparent bottle sections. These sections will house the ship and the 'water' pieces. Ensure all connections are secure to form a stable enclosure.


Figure 4: Illustrates the process of assembling the transparent bottle around the ship and adding the 'water' elements.

3. Constructing the Display Stand: Assemble the yellow and black base stand. This stand is designed to hold the bottle securely and often includes decorative elements like a skull emblem.
4. Integrating the LED Light Kit: Carefully follow the instructions for installing the LED light wires and connecting them to the battery box. The lights are designed to illuminate the ship and the 'water' inside the bottle. Ensure wires are neatly tucked away.
5. Assemblaggio finale: Place the assembled bottle onto the display stand. Connect any remaining decorative elements, such as the treasure chest and accessories.

Time-Lapse Assembly Video:

5. Funzionamento della luce LED

The EDUCIRO Impossible Pirate Bottle includes an integrated LED light kit to enhance its display. To operate the lights:

1. Ensure batteries (not included) are correctly installed in the battery box.
2. Individuare l'interruttore di alimentazione sul vano batteria.
3. Flip the switch to the 'ON' position to illuminate the model.
4. Per preservare la durata della batteria, portare l'interruttore in posizione "OFF" quando non lo si utilizza.

Figure 5: Demonstrates the visual difference between the LED lights being off and on, highlighting the illuminated effect.

6. Manutenzione

To keep your EDUCIRO Impossible Pirate Bottle in optimal condition:

• Pulizia: Gently dust the model with a soft, dry cloth. For more stubborn dirt, use a slightly damp panno e asciugare immediatamente. Evitare prodotti chimici aggressivi o detergenti abrasivi.
• Magazzinaggio: Store the model in a stable location away from direct sunlight and extreme temperatures to prevent discoloration or warping of plastic pieces.
• Cura della batteria: Remove batteries from the LED light kit if the model will not be used for an extended period to prevent leakage.

7. Risoluzione Dei Problemi

Se riscontri problemi durante o dopo il montaggio, tieni presente quanto segue:

• Pezzi mancanti: Double-check all bags and the assembly area. If a piece is genuinely missing, contact customer support.
• Pezzi non adatti: Ensure you are using the correct pieces for the current step. Apply gentle, even pressure. Refer to the instruction manual's illustrations.
• Luci LED non funzionanti:
  • Controllare che le batterie siano installate correttamente e non siano scariche.
  • Ensure the power switch on the battery box is in the 'ON' position.
  • Verificare che tutti i collegamenti dei cavi siano sicuri.

8. Specifiche

Figure 6: Approximate dimensions of the assembled EDUCIRO Impossible Pirate Bottle model.

9. Garanzia e supporto

For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official EDUCIRO websito. Conserva la ricevuta d'acquisto come prova d'acquisto.