Manuale utente delle cuffie wireless OPPO Enco Buds2

1. Introduzione

This manual provides detailed instructions for the OPPO Enco Buds2 wireless headphones, model ETE41. Please read this manual thoroughly before using the product to ensure proper operation and to maximize its lifespan.

Image 1.1: OPPO Enco Buds2 earbuds in their open charging case.

2. Contenuto della confezione

Verificare che tutti gli articoli siano presenti nella confezione del prodotto:

• OPPO Enco Buds2 Wireless Earbuds (Left and Right)
• Custodia di ricarica
• Cavo di ricarica USB-C
• Diverse misure di gommini auricolari (S, M, L)
• Manuale d'uso

Immagine 2.1: Passoview of the OPPO Enco Buds2 package contents.

3. Impostazione

3.1. Carica del dispositivo

To charge the OPPO Enco Buds2, place both earbuds into the charging case and close the lid. Connect the USB-C charging cable to the charging port on the case and to a power source. The indicator light on the charging case will illuminate to show charging status.

• Stato dell'indicatore:
• White and flashing: Charging in progress.
• White (solid): Charging complete.
• Red and flashing: Low battery, charge immediately.

Image 3.1: Charging instructions for the earbuds and case (refer to the right side of the manual page).

3.2. Abbinamento iniziale

Follow these steps to pair your OPPO Enco Buds2 with a new device:

1. Assicurati che gli auricolari siano nella custodia di ricarica e che il coperchio sia aperto.
2. Sul tuo dispositivo (ad esempio, smartphone), attiva il Bluetooth.
3. The earbuds will automatically enter pairing mode when the case is opened for the first time.
4. Select "OPPO Enco Buds2" from the list of available Bluetooth devices on your phone.
5. For subsequent pairing with a new device, press and hold the function button on the charging case for 4 seconds until the indicator light flashes white, then select the earbuds on your device.

Image 3.2: Pairing instructions (refer to the top right section of the manual page).

4. Utilizzo del dispositivo

4.1. Toccare Controlli

The OPPO Enco Buds2 feature touch-sensitive areas on each earbud for control. The default functions are:

Note: Play/Pause function may be disabled by default. Customize touch controls via the HeyMelody app.

Image 4.1: Touch control diagram (refer to the left side of the manual page).

4.2. Controllo della fotocamera

The earbuds support remote camera control. Double-tap either earbud to take photos remotely. This feature requires OPPO ColorOS 11.3 or later phones and updated Wireless Earphones app (V3.7.200 or later).

Image 4.2: Double-tap to control camera function.

4.3. Caratteristiche audio

The OPPO Enco Buds2 incorporate several audio enhancements:

• 10mm Large Titanized Driver: Designed to deliver stronger bass.
• Enco Live Stereo Sound Effects: Provides various sound effects for an enhanced listening experience.
• AI Deep Noise Cancellation for Calls: Utilizes artificial intelligence to reduce background noise during phone calls, ensuring clearer communication.
• Binaural Low-latency with Bluetooth 5.2 Transmission: Offers faster and more stable connectivity with reduced audio delay.

Image 4.3: Key features of the OPPO Enco Buds2.

5. Manutenzione

5.1. Resistenza all'acqua

The OPPO Enco Buds2 are rated IPX4 for water resistance. This means they are protected against splashing water from any direction, making them suitable for daily use and light workouts. They are not designed for submersion in water or exposure to heavy rain.

Image 5.1: IPX4 Water Resistance feature.

5.2. Pulizia e cura

Per mantenere prestazioni e igiene ottimali:

• Pulisci regolarmente gli auricolari e la custodia di ricarica con un panno morbido, asciutto e privo di lanugine.
• Rimuovere i gommini auricolari e pulirli con acqua e sapone neutro, se necessario, assicurandosi che siano completamente asciutti prima di riattaccarli.
• Evitare l'uso di materiali abrasivi, alcol o detergenti chimici.
• Mantenere puliti e privi di detriti i contatti di ricarica sia sugli auricolari che sulla custodia.

6. Risoluzione Dei Problemi

If you encounter issues with your OPPO Enco Buds2, refer to the following common solutions:

• Gli auricolari non si associano: Assicurati che il Bluetooth sia abilitato sul tuo dispositivo e che gli auricolari siano in modalità di associazione. Prova a disattivare e riattivare il Bluetooth sul tuo dispositivo.
• Nessun suono da uno o entrambi gli auricolari: Check the battery level of the earbuds and charging case. Ensure the earbuds are properly connected to your device.
• Problemi di ricarica: Verify the charging cable and adapter are working correctly. Ensure the charging contacts are clean.
• Controlli touch che non rispondono: Ensure your fingers are clean and dry. If the issue persists, try resetting the device.

6.1. Reimpostazione del dispositivo

To reset your OPPO Enco Buds2 to factory settings:

1. Posiziona entrambi gli auricolari nella custodia di ricarica.
2. Aprire il coperchio della custodia di ricarica.
3. Touch and hold the touch control areas on both earbuds simultaneously for 15 seconds until you hear an alert tone. This indicates the factory reset is complete.

7. Specifiche

Detailed technical specifications for the OPPO Enco Buds2 (Model ETE41):

8. Garanzia e supporto

For warranty information, technical support, or service inquiries, please refer to the warranty card included in your product packaging or visit the official OPPO websito. Conservare la prova d'acquisto per eventuali reclami in garanzia.