Moistenland Water Flow Meter FML04 Instruction Manual

Introduzione

The Moistenland Water Flow Meter FML04 is designed to accurately measure water usage in various applications, including garden hoses, RVs, and irrigation systems. It features a standard 3/4" hose thread for easy attachment and an IPX6 waterproof rating for outdoor durability. The digital display provides real-time water flow rate, single water usage, 7-day average usage, and total cumulative usage.

Figure 1: Moistenland Water Flow Meter FML04.

Contenuto della confezione

• 1 x Moistenland Water Flow Meter FML04
• 1 x CR2032 3V Lithium Metal Battery (pre-installed or included)
• Manuale di istruzioni (questo documento)

Configurazione e installazione

Follow these steps to install your Moistenland Water Flow Meter:

1. Installazione della batteria: If the battery is not pre-installed, use a tool to gently unscrew the cap on the top of the meter in the unlock direction. Insert the CR2032 3V battery with the positive (+) side facing up. Screw the cap back on in the lock direction until secure.
2. Collegamento alla fonte d'acqua: Attach the female end of the water flow meter (the end with the rotating connector) to your water source, such as a garden faucet or hose. Ensure the connection is tight to prevent leaks.
3. Connect Hose/Nozzle: Attach your garden hose or nozzle to the male end of the water flow meter.
4. Orientamento: Ensure the water flow meter is installed with the arrow indicating the direction of water flow. The meter is designed for water to flow from the female inlet to the male outlet.

Figure 2: Battery installation and hose connection steps.

Figure 3: The 360-degree rotational connector for flexible installation.

Istruzioni per l'uso

The Moistenland Water Flow Meter features a digital display and a single button for cycling through different measurement modes. The display automatically activates when water flows through the meter.

Modalità di visualizzazione:

Press the button on the front of the meter to switch between the following four display modes:

• Flow Mode (GPM): Displays the real-time water flow rate in Gallons Per Minute (GAL/Min). Minor fluctuations may occur due to real-time measurement.
• Modalità di consumo (SINGOLO): Shows the water usage for a single session. This value can be reset by pressing and holding the button.
• Modalità media (AVG): Displays the 7-day average water usage (GAL/D).
• Modalità totale (TOTALE): Shows the cumulative total water consumption since the meter was first used or last reset. The maximum measurement is 99999 gallons.

Figure 4: Water Flow Meter components and display.

Resetting Single Consumption:

To reset the "Single water usage" (Consumption Mode), navigate to this mode and then press and hold the button until the display resets to zero.

Precisione:

The meter provides an accuracy of 0.1 gallon for values up to 9999.9 gallons. When the total value exceeds 9999.9, the accuracy becomes 1 gallon, and the decimal point is no longer displayed.

Manutenzione

• Pulizia: Wipe the exterior of the meter with a damp panno. Non usare detergenti abrasivi o solventi.
• Grado di impermeabilità: The meter is IPX6 waterproof, meaning it is protected against powerful water jets. It can withstand rain and outdoor use, but it should not be submerged in water.
• Magazzinaggio: When not in use for extended periods, store the meter in a dry, cool place away from direct sunlight.
• Sostituzione della batteria: Replace the CR2032 3V battery when the display becomes dim or unresponsive. Follow the battery installation steps outlined in the Setup section.

Figure 5: The water flow meter is IPX6 waterproof for outdoor use.

Risoluzione dei problemi

• Nessun display/Display oscurato:
  • Check the battery. Replace the CR2032 3V battery if it is low or depleted.
  • Ensure the battery is installed correctly with the positive (+) side facing up.
• Letture imprecise:
  • Ensure the meter is installed in the correct direction of water flow (indicated by an arrow on the device).
  • Check for leaks at the connections, which can affect accuracy.
  • Ensure water flow is consistent and not excessively turbulent.
• Perdite nei collegamenti:
  • Tighten all connections securely by hand. Do not overtighten with tools, as this can damage the threads.
  • Check if rubber washers are properly seated in the connectors. Replace if damaged.
• Meter Not Registering Flow:
  • Ensure water is actually flowing through the meter.
  • Verify the meter is installed in the correct orientation.
  • Check for any blockages in the hose or meter.

Specifiche

Figura 6: Dimensioni del prodotto e specifiche principali.

Video del prodotto

Garanzia e supporto

Le informazioni relative alla garanzia del prodotto e all'assistenza clienti non erano disponibili nei dati di prodotto forniti. Fare riferimento alla confezione del prodotto o al manuale d'uso ufficiale del produttore. websito per i dettagli sulla copertura della garanzia e su come contattare l'assistenza clienti.