ENVENTOR Green Cross Line Laser Level EN011G Instruction Manual

1. Introduzione

Thank you for choosing the ENVENTOR Green Cross Line Laser Level EN011G. This device is designed to provide precise horizontal and vertical alignment for various indoor and outdoor construction and DIY projects. It features both self-leveling and manual modes, a highly visible green laser, and a durable, IP54-rated design. Please read this manual thoroughly before use to ensure safe and optimal operation.

2. Informazioni sulla sicurezza

AVVERTIMENTO: This product emits a laser beam. Direct exposure to the laser beam can cause eye injury. Always follow these safety guidelines:

• Non fissare direttamente il raggio laser.
• Non puntare il raggio laser verso persone o animali.
• Avoid positioning the laser beam at eye level.
• Do not disassemble the laser level. Repairs should only be performed by authorized personnel.
• Tenere il dispositivo fuori dalla portata dei bambini.
• Utilizzare solo le batterie specificate.

The device is rated IP54 for protection against dust and splashing water. However, it is not designed for submersion.

3. Contenuto della confezione

Verifica che tutti gli articoli siano presenti nel tuo pacco:

• 1 x ENVENTOR Green Cross Line Laser Level EN011G
• 1 x 360° Magnetic Bracket
• 1 x Borsa portaoggetti
• 2 batterie AA
• 1 x Manuale utente

4. Prodotto finitoview

Familiarizza con i componenti della tua livella laser.

Figura 4.1: Labeled components of the ENVENTOR Green Cross Line Laser Level, showing the On/Off Button, Lock/Unlock Switch, Laser Window, Battery Compartment, 1/4"-20 Tripod Thread, and Magnetic Bracket.

Figura 4.2: The laser level demonstrating its 1/4"-20 tripod thread compatibility and the 360° magnetic holder, which can also be nailed to a wall.

Figura 4.3: The compact and lightweight design of the laser level, with dimensions of 80mm length, 85mm height, and 288g weight.

5. Impostazione

5.1 Installazione della batteria

1. Locate the battery compartment on the side of the laser level (refer to Figure 4.1).
2. Aprire il coperchio del vano batterie.
3. Inserire le due batterie AA, assicurandosi della corretta polarità (+/-).
4. Chiudere saldamente il coperchio del vano batterie.

5.2 Montaggio del dispositivo

The EN011G offers versatile mounting options:

• Montaggio del treppiede: The device features a 1/4"-20 tripod thread at its base. Attach it to any compatible tripod for stable positioning (tripod not included).
• Staffa magnetica: Use the included 360° magnetic bracket to attach the laser level to metal surfaces. The bracket also has a keyhole slot for nailing it to non-magnetic surfaces (refer to Figure 4.2).

6. Modalità operative

The EN011G laser level features two primary operating modes: Self-Leveling Mode and Manual Mode.

Figura 6.1: Illustration of the Manual Mode (locked position, lines flash every 5s) and Self-Leveling Mode (unlocked position, self-levels within 3s if incline is ≤ 4°).

6.1 Modalità autolivellante

Questa modalità è ideale per le applicazioni che richiedono linee perfettamente livellate o a piombo.

1. Ensure the laser level is placed on a relatively flat surface or mounted securely.
2. Slide the Lock/Unlock Switch (refer to Figure 4.1) to the sbloccato posizione.
3. Press the On/Off Button to power on the device.
4. The laser will automatically self-level within 3 seconds if the surface incline is within 4° ± 1°.
5. If the incline exceeds 4°, the laser lines will flash rapidly, indicating that the device is out of its self-leveling range. Adjust the position of the laser level until it is within range and the lines become steady.

6.2 Modalità manuale

Use this mode when you need to project lines at custom angles, such as for stair railings or decorative patterns.

1. Slide the Lock/Unlock Switch (refer to Figure 4.1) to the bloccato posizione.
2. Press the On/Off Button to power on the device.
3. The laser lines will be projected and can be positioned at any desired angle. The lines will flash every 5 seconds to indicate that the device is in manual mode and not self-leveling.

7. Funzionamento

7.1 Accensione/Spegnimento

• To turn on: Press the On/Off Button (refer to Figure 4.1).
• To turn off: Press the On/Off Button again.

7.2 Applicazioni

The ENVENTOR Green Cross Line Laser Level is suitable for a wide range of tasks, including but not limited to:

• Piastrellatura di pavimenti e pareti.
• Hanging pictures, shelves, and cabinets.
• Installing windows and doors.
• Framing and general construction layout.
• Wallpapering and decorative projects.

Figura 7.1: Examples of the laser level in use for home decoration and construction tasks.

8. Manutenzione

8.1 Pulizia

• Regularly clean the laser window and housing with a soft, damp stoffa.
• Non utilizzare detergenti abrasivi o solventi, poiché potrebbero danneggiare il dispositivo.
• Assicurarsi che il dispositivo sia asciutto prima di riporlo.

8.2 Conservazione

• When not in use, store the laser level in its protective bag in a cool, dry place.
• Rimuovere le batterie se il dispositivo non verrà utilizzato per un periodo prolungato per evitare perdite.
• Always store the device with the Lock/Unlock Switch in the bloccato position to protect the pendulum mechanism.

8.3 Sostituzione della batteria

When the laser lines dim or the device fails to power on, replace the AA batteries as described in Section 5.1.

9. Risoluzione Dei Problemi

10. Specifiche

Figura 10.1: Detailed product size and weight information.

Figura 10.2: Visual representation of the laser level's IP54 rating, highlighting its waterproof, dustproof, and shock-resistant properties.

11. Guida video

Watch the official product video for a visual demonstration of the ENVENTOR Green Cross Line Laser Level's features and operation.

12. Garanzia e supporto

12.1 Informazioni sulla garanzia

ENVENTOR products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the product packaging or the seller's website for specific warranty terms and duration. Keep your purchase receipt as proof of purchase.

12.2 Assistenza clienti

For technical assistance, troubleshooting, or warranty claims, please contact ENVENTOR customer support through the retailer where you purchased the product or visit the official ENVENTOR website for contact details. When contacting support, please have your product model number (EN011G) and purchase information ready.