PROfezzion PR-UN1 Wireless Shutter Release Remote Control User Manual

Introduzione

Grazie per l'acquistoasing the PROfezzion PR-UN1 Wireless Shutter Release Remote Control. This device is designed to reduce camera shake and enable remote photography for various Sony camera models. It operates at a 2.4GHz frequency with 16 available channels, offering reliable performance up to 50 meters (164 feet) without a direct line of sight. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal use of your remote control.

Prodotto finitoview

The PROfezzion PR-UN1 system consists of three main components: a transmitter, a receiver, and a connecting cable. Both the transmitter and receiver are powered by AAA batteries.

Figure 1: Transmitter and Receiver Components. This image displays the various parts of both the transmitter and receiver units, including the indicator lamp, switch, shutter release button, mode dial, strap hole, channel setting switch, battery compartment, 1/4"-20 female thread, cold shoe mount, locking disk, and remote socket.

Caratteristiche principali:

• 2.4GHz Frequency & 16 Channels: Reduces interference and ensures stable connection.
• Portata wireless: Up to 50m / 164' without direct line of sight.
• Five Shooting Modes: Single shot, 5 seconds delay shot, 3 continuous shots, unlimited continuous shots, and bulb shot.
• Multiple Receiver Triggering: One transmitter can trigger multiple receivers simultaneously.
• 1/4"-20 Tripod Socket: Receiver can be mounted on a tripod.
• Clip rimovibile: Allows attachment to a tripod leg or other surfaces.

Istruzioni di installazione

1. Installazione della batteria

Both the transmitter and receiver require two AAA batteries each. Ensure correct polarity (+/-) during installation. Incorrect battery installation will prevent the remote control from functioning.

Figure 2: Installation Steps for Camera Remote. This image illustrates the process of installing batteries, setting the channel, mounting the receiver, and pairing the devices.

2. Impostazione del canale

To avoid interference from other wireless devices, the PR-UN1 offers 16 channels. Set the transmitter and receiver to the same channel using the channel setting switches located inside their battery compartments. This ensures proper communication between the units.

Figure 3: Optional Multiple Channels. This diagram shows the 16 available channel settings on the transmitter and receiver, emphasizing the need to match them.

3. Collegamento alla fotocamera

Mount the receiver onto your camera's hot shoe. Connect the receiver to your camera's remote control port using the provided connecting cable. Ensure the connection is secure.

4. Accensione e associazione

Turn on both the transmitter and the receiver using their respective power switches. Press the shutter button on the transmitter; both indicator lights should illuminate, confirming successful pairing.

Modalità operative

The PROfezzion PR-UN1 offers five distinct shooting modes, selectable via the mode dial on the transmitter. Ensure your camera is set to the appropriate shooting mode (e.g., single shot, continuous, manual) to match the remote control's function.

Figura 4: Oltreview of 5 Shutter Release Modes. This image provides a visual summary of the single shot, 3 continuous shots, unlimited continuous shots, 5 seconds delay shot, and bulb shot modes.

1. Single Shot Mode

Set the transmitter's mode dial to the single shot icon. Set your camera to single shot mode. Half-press the transmitter's shutter button to focus, then fully press to take a single photo.

Figure 5: Single Shot Mode. This image illustrates the steps for using the single shot mode, including setting the transmitter and camera, and pressing the shutter button.

2. 5 Seconds Delay Shot Mode

Set the transmitter's mode dial to the 5-second delay icon. Set your camera to single shot mode. Fully press the transmitter's shutter button to initiate a 5-second countdown before the photo is taken.

Figure 6: 5 Seconds Delay Shot Mode. This image demonstrates how to use the 5-second delay shot mode, showing the transmitter setting, camera setting, and the action of pressing the button.

3. 3 Continuous Shots Mode

Set the transmitter's mode dial to the 3 continuous shots icon. Set your camera to single shot mode. Fully press the transmitter's shutter button to take three photos continuously.

Figure 7: 3 Continuous Shots Mode. This image details the process for taking 3 continuous shots, including the transmitter and camera settings.

4. Unlimited Continuous Shots Mode

Set the transmitter's mode dial to the unlimited continuous shots icon. Set your camera to continuous shot mode. Half-press the button to focus. Fully press and hold the button until the indicator lamp turns OFF to lock the shutter for unlimited continuous shots. Press the button again to end the shooting.

Figure 8: Unlimited Continuous Shots Mode. This image explains how to use the unlimited continuous shooting mode, including focusing and locking the shutter.

5. Bulb Shot Mode

Set the transmitter's mode dial to the bulb shot icon. Set your camera to manual mode (M) and adjust the shutter speed to BULB. Half-press the button to focus. Fully press and hold the button until the indicator lamp turns OFF to lock the shutter for bulb shot. Press the button again to end the shooting.

Figure 9: Bulb Shot Mode. This image illustrates the steps for using the bulb shot mode, including setting the transmitter and camera, and controlling the shutter duration.

Funzioni aggiuntive

Wireless or Wired Operation

The PR-UN1 can be used as a wireless remote control or, if preferred, the receiver itself can act as a wired cable switch when directly connected to the camera without the transmitter.

Figure 10: Wireless or Wired Remote. This image shows the flexibility of using the device either wirelessly with the transmitter or as a wired remote by directly connecting the receiver to the camera.

Triggering Multiple Receivers

A single PR-UN1 transmitter can trigger multiple PR-UN1 receivers simultaneously, provided all units are set to the same channel. This is useful for multi-camera setups.

Figure 11: Multiple Receivers. This image demonstrates one transmitter controlling multiple cameras equipped with receivers, highlighting the 2.4GHz frequency and 50m/164ft range.

Clip rimovibile

The receiver includes a removable clip, allowing it to be attached to a tripod leg or other suitable surfaces. The clip is compatible with thicknesses approximately 10mm to 25mm (0.39" to 0.98").

Compatibilità

This remote control is compatible with a wide range of Sony cameras, including but not limited to:

• Sony A6600, A6500, A6400, A6300, A6100, A6000, A5100, A5000
• Sony A1, A1 II, A9, A9II, A9III
• Sony A7, A7 II, A7 III, A7 IV, A7R, A7R V, A7R II, A7R III, A7R IV, A7S, A7S II, A7S III
• Sony A58, HX90, HX60, HX50, HX40
• Sony RX100 VII, RX100 VI, RX100 VA, RX100 V, RX100 IV, RX100 III, RX10 II, RX10 III, RX10 IV
• Sony ZV-1, FX30

Note: This remote control does not support video start/stop functions.

Manutenzione

• Keep the remote control clean and dry. Avoid exposure to water or excessive humidity.
• Use a soft, dry cloth to clean the surface. Do not use harsh chemicals or abrasive cleaners.
• Rimuovere le batterie se il dispositivo non verrà utilizzato per un periodo prolungato per evitare perdite.
• Conservare in un luogo fresco e asciutto, lontano dalla luce solare diretta e dalle temperature estreme.

Risoluzione dei problemi

Il telecomando non risponde:

• Controllare le batterie: Assicurarsi che le batterie siano installate correttamente e abbiano una carica sufficiente. Sostituirle se necessario.
• Canali di corrispondenza: Verify that both the transmitter and receiver are set to the same channel.
• Accensione: Confirm both units are powered on.
• Connessione telecamera: Ensure the receiver is securely connected to the camera's remote port.
• Allineare: Check if the transmitter is within the effective operating range (50m/164').

Interruzione del segnale:

• Cambia canale: If experiencing interference, try switching to a different channel on both the transmitter and receiver.
• Ostruzioni: Ridurre al minimo gli ostacoli fisici tra il trasmettitore e il ricevitore.

Specifiche

Garanzia e supporto

For warranty information and technical support, please refer to the product packaging or contact PROfezzion customer service directly. Keep your purchase receipt for warranty claims.