1. Introduzione
Thank you for choosing the Magene H603 Heart Rate Monitor Chest Strap. This device is designed to provide accurate real-time heart rate tracking for your fitness activities. Please read this manual carefully to ensure proper use and maintenance of your device.
2. Prodotto finitoview
Caratteristiche principali
- High-Performance Real-time Heart Rate Tracking: Utilizes advanced ECG processing to extract accurate heart rate data, minimizing interference from movement and sweat.
- Split Chest Strap Design: Offers enhanced comfort and a secure fit during exercise.
- Batteria a lunga durata: Provides approximately 1000 hours of operation (based on laboratory tests; actual duration may vary).
- ANT+ & Bluetooth Compatibility: Allows simultaneous recording with ANT+ devices and Bluetooth applications for stable data transmission.
- IP67 antipolvere e impermeabile: Designed to withstand dust and water exposure during daily use.
Cosa c'è nella scatola
- Magene H603 Heart Rate Monitor Sensor
- Fascia toracica regolabile

Image: Magene H603 Heart Rate Monitor highlighting new features.

Image: Magene H603 Split Chest Strap Design.
3. Impostazione
Installazione della batteria
The Magene H603 uses a CR2032 coin cell battery. To install or replace the battery:
- Individuare il vano batteria sul retro del sensore.
- Use a coin to gently twist the battery cover counter-clockwise to open it.
- Inserire la batteria CR2032 con il lato positivo (+) rivolto verso l'alto.
- Allineare il coperchio e ruotarlo in senso orario per fissarlo.

Image: Battery installation for the Magene H603.
Indossare il cardiofrequenzimetro
For accurate readings, follow these steps to wear the chest strap:
- Align the heart rate module with the chest strap. The two snaps on the module should connect to the corresponding snaps on the strap.
- Moisten the electrode areas on the back of the chest strap with a few drops of water or electrode gel. This improves conductivity.
- Adjust the length of the chest strap so it fits comfortably and snugly around your chest, just below your pectoral muscles.
- Position the sensor module at the center of your chest, with the Magene logo facing upwards. Ensure the electrodes are firmly against your skin.

Image: Instructions on how to wear the Magene H603 Heart Rate Monitor.

Image: Magene H603 Heart Rate Monitor worn by an individual.
Associazione con i dispositivi
The Magene H603 supports both ANT+ and Bluetooth 4.2 for connectivity.
- Wear the heart rate monitor as described above. The sensor will activate automatically when it detects a heart rate.
- On your compatible device (e.g., cycling computer, smartwatch, smartphone app like Wahoo, Zwift, Strava, Elite HRV), go to the sensor pairing settings.
- Select to add a new heart rate sensor. The device should detect the Magene H603.
- Confermare l'associazione.
Nota: A red LED light on the sensor indicates that the monitor is active and ready to use.
4. Istruzioni per l'uso
Once the Magene H603 is properly worn and paired with your device, it will automatically begin transmitting heart rate data. Ensure your receiving device is within range and configured to display heart rate information.
Durante l'esercizio
- Monitor your heart rate on your connected device.
- The H603 provides real-time data, allowing you to adjust your intensity as needed.
- The advanced algorithm helps maintain accuracy even during intense movement and sweating.

Image: Red LED light indicating the sensor is ready.
5. Manutenzione
Pulizia
To ensure longevity and hygiene, clean the chest strap after each use:
- Detach the sensor module from the strap.
- Rinse the chest strap under running water.
- Pulisci il modulo sensore con un pannoamp cloth. Do not submerge the sensor module in water.
- Appendere il cinturino ad asciugare. Non lavare in lavatrice o asciugare in asciugatrice.
Magazzinaggio
Store the heart rate monitor in a cool, dry place when not in use. Detach the sensor module from the strap to conserve battery life.
Cura della batteria
While the battery life is extensive, replace the CR2032 battery when the device indicates low power or fails to connect. Always dispose of used batteries responsibly.

Image: Magene H603 IP67 Dustproof and Waterproof.
6. Risoluzione Dei Problemi
No Heart Rate Reading
- Ensure the chest strap electrodes are moistened and making good contact with your skin.
- Check if the sensor module is securely snapped onto the strap.
- Verificare che la batteria sia installata correttamente e abbia una carica sufficiente. Sostituirla se necessario.
- Confirm that the sensor is active (red LED light).
Letture imprecise
- Ensure the strap is worn snugly and positioned correctly on your chest.
- Avoid wearing the sensor directly over clothing, as this can interfere with readings.
- Interference from other electronic devices or strong electromagnetic fields can affect accuracy. Move away from such sources.
Problemi di connettività
- Assicurati che il Bluetooth o ANT+ sia abilitato sul dispositivo ricevente.
- Move the receiving device closer to the heart rate monitor.
- Prova a disassociare e riassociare il sensore al tuo dispositivo.
- Riavviare il dispositivo ricevente.
7. Specifiche
| Specificazione | Valore |
|---|---|
| Marca | stomaco |
| Numero di modello | H603 |
| Materiale | Plastica |
| Colore | Blu |
| Dispositivi compatibili | Smartphones, Cycling Computers, Smartwatches |
| Peso del prodotto | 16 grammi |
| Durata della batteria | 1000 ore |
| Tipo di sensore | Monitor della frequenza cardiaca |
| Descrizione della batteria | CR2032 (sostituibile) |
| Lingua | Inglese |
| EU Spare Parts Availability Period | 1 anno |
| Dimensioni | Dimensioni: 62.3 × 35.1 × 11.5 mm |
| Produttore | stomaco |
| Numero di parte | H603 |
| Componenti inclusi | Fascia toracica per cardiofrequenzimetro |
| Nome del tipo di prodotto | Fascia toracica per cardiofrequenzimetro |
8. Informazioni sulla garanzia
The Magene H603 Heart Rate Monitor Chest Strap comes with a Garanzia del produttore di 2 anni. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or human-caused damage.
Conservare la prova d'acquisto per eventuali richieste di garanzia.
9. Supporto
For further assistance, technical support, or warranty inquiries, please contact Magene customer service through their official websito o il rivenditore presso cui hai acquistato il prodotto.
You can also visit the Magene brand store for more information and product updates: Magene Brand Store





